Thermomechanical properties of amorphous metallic tungsten-oxygen and tungsten-oxide coatings

In this work, we investigate the correlation between morphology, composition, and the mechanical properties of metallic amorphous tungsten-oxygen and amorphous tungsten-oxide films deposited by Pulsed Laser Deposition. This correlation is investigated by the combined use of Brillouin Spectroscopy and the substrate curvature method. The stiffness of the films is strongly affected by both the oxygen content and the mass density. The elastic moduli show a decreasing trend as the mass density decreases and the oxygen-tungsten ratio increases. A plateaux region is detected in correspondence of the transition between metallic and oxide films. The compressive residual stresses, moderate stiffness and high local ductility that characterize compact amorphous tungsten-oxide films make them promising for applications involving thermal or mechanical loads. The coefficient of thermal expansion is quite high (i.e. 8.9 $\cdot$ 10$^{-6}$ K$^{-1}$), being strictly correlated to the amorphous structure and stoichiometry of the films. Under thermal treatments they show a quite low relaxation temperature (i.e. 450 K). They crystallize into the $\gamma$ monoclinic phase of WO$_3$ starting from 670 K, inducing an increase by about 70\% of material stiffness.Comment: The research leading to these results has also received funding from the European Research Council Consolidator Grant ENSURE (ERC-2014-CoG No. 647554). The views and opinions expressed herein do not necessarily reflect those of the European Commissio

Tungsten oxide nanowires grown on amorphous-like tungsten films

Tungsten oxide nanowires have been synthesized by vacuum annealing in the range 500-710 °C from amorphous-like tungsten films, deposited on a Si(100) substrate by pulsed laser deposition (PLD) in the presence of a He background pressure. The oxygen required for the nanowires formation is already adsorbed in the W matrix before annealing, its amount depending on deposition parameters. Nanowire crystalline phase and stoichiometry depend on annealing temperature, ranging from W18O49-Magneli phase to monoclinic WO3. Sufficiently long annealing induces the formation of micrometer-long nanowires, up to 3.6 μm with an aspect ratio up to 90. Oxide nanowire growth appears to be triggered by the crystallization of the underlying amorphous W film, promoting their synthesis at low temperatures

Raman microscopy to characterize plasma-wall interaction materials: from carbon era to metallic walls

Plasma-wall interaction in magnetic fusion devices is responsible for wall changes and plasma pollution with major safety issues. It is investigated both in situ and ex situ, especially by realizing large scale dedicated post-mortem campaigns. Selected parts of the walls are extracted and characterized by several techniques. It is important to extract hydrogen isotopes, oxygen or other element content. This is classically done by ion beam analysis and thermal desorption spectroscopy. Raman microscopy is an alternative and complementary technique. The aim of this work is to demonstrate that Raman microscopy is a very sensitive tool. Moreover, if coupled to other techniques and tested on well-controlled reference samples, Raman microscopy can be used efficiently for characterization of wall samples. Present work reviews long experience gained on carbon-based materials demonstrating how Raman microscopy can be related to structural disorder and hydrogen retention, as it is a direct probe of chemical bonds and atomic structure. In particular, we highlight the fact that Raman microscopy can be used to estimate the hydrogen content and bonds to other elements as well as how it evolves under heating. We also present state-of-the-art Raman analyses of beryllium- and tungsten-based materials, and finally, we draw some perspectives regarding boron-based deposits.</p

Thermomechanical properties of amorphous metallic tungsten-oxygen and tungsten-oxide coatings

Metallic amorphous tungsten-oxygen and amorphous tungsten-oxide films, deposited by Pulsed Laser Deposition, are characterized. The correlation is investigated between morphology, composition, and structure, measured by various techniques, and the mechanical properties, characterized by Brillouin Spectroscopy and the substrate curvature method. The stiffness of the films is correlated to the oxygen content and the mass density. The elastic moduli decrease as the mass density decreases and the oxygen-tungsten ratio increases. A plateau region is observed around the transition between the metal-like (conductive and opaque) films and the oxide ones (non-conductive and transparent). The compressive residual stresses, moderate stiffness and high local ductility of compact amorphous tungsten-oxide films are interesting for applications involving thermal or mechanical loads. The coefficient of thermal expansion is quite high (8.9 ⋅ 10 −6 K −1 ), being strictly correlated to the amorphous structure and stoichiometry of the films. Upon thermal treatments the coatings show a quite low relaxation temperature of 450 K. Starting from 670 K, they crystallize into the γ monoclinic phase of WO 3 , the stiffness increasing by about 70%. The measured thermomechanical properties provide a guidance for the design of devices which include a tungsten based layer, in order to assure their mechanical integrity

An organizing framework for informal caregiver interventions: detailing caregiving activities and caregiver and care recipient outcomes to optimize evaluation efforts

Abstract Background Caregiver interventions may help improve the quality of informal care. Yet the lack of a systematic framework specifying the targets and outcomes of caregiver interventions hampers our ability to understand what has been studied, to evaluate existing programs, and to inform the design of future programs. Our goal was to develop an organizing framework detailing the components of the caregiving activities and the caregiver and care recipient outcomes that should be affected by an intervention. In so doing, we characterize what has been measured in the published literature to date and what should be measured in future studies to enable comparisons across interventions and across time. Methods Our data set comprises 121 reports of caregiver interventions conducted in the United States and published between 2000 and 2009. We extracted information on variables that have been examined as primary and secondary outcomes. These variables were grouped into categories, which then informed the organizing framework. We calculated the frequency with which the interventions examined each framework component to identify areas about which we have the most knowledge and under-studied areas that deserve attention in future research. Results The framework stipulates that caregiver interventions seek to change caregiving activities, which in turn affect caregiver and care recipient outcomes. The most frequently assessed variables have been caregiver psychological outcomes (especially depression and burden) and care recipient physical and health care use outcomes. Conclusions Based on the organizing framework, we make three key recommendations to guide interventions and inform research and policy. First, all intervention studies should assess quality and/or quantity of caregiving activities to help understand to what extent and how well the intervention worked. Second, intervention studies should assess a broad range of caregiver and care recipient outcomes, including considering whether expanding to economic status and health care use of the caregiver can be accommodated, to ease subsequent economic evaluations of caregiving. Third, intervention studies should measure a common set of outcomes to facilitate cross-time and cross-study comparisons of effectiveness

Plasma-wall interaction studies within the EUROfusion consortium: Progress on plasma-facing components development and qualification

This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.The provision of a particle and power exhaust solution which is compatible with first-wall components and edge-plasma conditions is a key area of present-day fusion research and mandatory for a successful operation of ITER and DEMO. The work package plasma-facing components (WP PFC) within the European fusion programme complements with laboratory experiments, i.e. in linear plasma devices, electron and ion beam loading facilities, the studies performed in toroidally confined magnetic devices, such as JET, ASDEX Upgrade, WEST etc. The connection of both groups is done via common physics and engineering studies, including the qualification and specification of plasma-facing components, and by modelling codes that simulate edge-plasma conditions and the plasma-material interaction as well as the study of fundamental processes. WP PFC addresses these critical points in order to ensure reliable and efficient use of conventional, solid PFCs in ITER (Be and W) and DEMO (W and steel) with respect to heat-load capabilities (transient and steady-state heat and particle loads), lifetime estimates (erosion, material mixing and surface morphology), and safety aspects (fuel retention, fuel removal, material migration and dust formation) particularly for quasi-steady-state conditions. Alternative scenarios and concepts (liquid Sn or Li as PFCs) for DEMO are developed and tested in the event that the conventional solution turns out to not be functional. Here, we present an overview of the activities with an emphasis on a few key results: (i) the observed synergistic effects in particle and heat loading of ITER-grade W with the available set of exposition devices on material properties such as roughness, ductility and microstructure; (ii) the progress in understanding of fuel retention, diffusion and outgassing in different W-based materials, including the impact of damage and impurities like N; and (iii), the preferential sputtering of Fe in EUROFER steel providing an in situ W surface and a potential first-wall solution for DEMO.European Commission; Consortium for Ocean Leadership 633053; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART