Threshold Dynamics of a Huanglongbing Model with Logistic Growth in Periodic Environments

We analyze the impact of seasonal activity of psyllid on the dynamics of Huanglongbing (HLB) infection. A new model about HLB transmission with Logistic growth in psyllid insect vectors and periodic coefficients has been investigated. It is shown that the global dynamics are determined by the basic reproduction number R0 which is defined through the spectral radius of a linear integral operator. If R0 1, then the disease persists. Numerical values of parameters of the model are evaluated taken from the literatures. Furthermore, numerical simulations support our analytical conclusions and the sensitive analysis on the basic reproduction number to the changes of average and amplitude values of the recruitment function of citrus are shown. Finally, some useful comments on controlling the transmission of HLB are given

Room-temperature conversion of ethane and the mechanism understanding over single iron atoms confined in graphene

Abstract(#br)The catalytic conversion of ethane to high value-added chemicals is significantly important for utilization of hydrocarbon resources. However, it is a great challenge due to the typically required high temperature (> 400 °C) conditions. Herein, a highly active catalytic conversion process of ethane at room temperature (25 °C) is reported on single iron atoms confined in graphene via the porphyrin-like N 4 -coordination structures. Combining with the operando time of flight mass spectrometer and density functional theory calculations, the reaction is identified as a radical mechanism, in which the C–H bonds of the same C atom are preferentially and sequentially activated, generating the value-added C 2 chemicals, simultaneously avoiding the over-oxidation of the products to CO 2 . The in-situ formed O–FeN 4 –O structure at the single iron atom serves as the active center for the reaction and facilitates the formation of ethyl radicals. This work deepens the understanding of alkane C–H activation on the FeN 4 center and provides the reference in development of efficient catalyst for selective oxidation of light alkane

Bioengineered Ferritin Nanocarriers for Cancer Therapy

Ferritin naturally exists in most organisms and can specifically recognize the transferrin 1 receptor (TfR1), which is generally highly expressed on various types of tumor cells. The pH dependent reversible assembling and disassembling property of ferritin renders it as a suitable candidate for encapsulating a variety of anticancer drugs and imaging probes. Ferritins external surface is chemically and genetically modifiable which can serve as attachment site for tumor specific targeting peptides or moieties. Moreover, the biological origin of these protein cages makes it a biocompatible nanocarrier that stabilizes and protects the enclosed particles from the external environment without provoking any toxic or immunogenic responses. Recent studies, further establish ferritin as a multifunctional nanocarrier for targeted cancer chemotherapy and phototherapy. In this review, we introduce the favorable characteristics of ferritin drug carriers, the specific targeted surface modification and a multifunctional nanocarriers combined chemotherapy with phototherapy for tumor treatment. Taken together, ferritin is a potential ideal base of engineered nanoparticles for tumor therapy and still needs to explore more on its way

High luminance of CuInS2-based yellow quantum dot light emitting diodes fabricated by all-solution processing

In this work, all-solution processed, multi-layer yellow quantum dot light emitting diodes (QLEDs), consisting of a hole transport layer of poly(9-vinylcarbazole), emissive layer of CuInS2/ZnS (ZCIS) QDs, and electron transport layer of ZnO nanoparticles, are fabricated. To improve the carrier-balance in QLEDs, a ligand-exchange strategy is employed to replace n-dodecanethiol that caps the surface of CuInS2/ZnS quantum dots with 2-ethylhexanethiol. After this processing, improvement of current efficiency and external quantum efficiency of QLEDs is achieved. The optimized diodes exhibit a maximum luminance of 2354 cd m(-2) and an external quantum efficiency of 0.63%, together with a lower turn-on voltage (decreases from 3.1 V to 2.7 V) using these ligand-exchanged QDs as emitting materials. Furthermore, CuInS2-based QLEDs in our study exhibit color retainability with increasing voltage and prolonged use, and show great promise for practical application

PMMA-Grafted Calcium Sulfate Whiskers for Applications as Fillers in PVC

Calcium sulfate whiskers (CSWs) were hydroxylated with a sodium hydroxide (NaOH) solution and isolated for subsequent treatment with an ethanolic 3-(methacryloxy)propyltrimethoxysilane (KH570) solution to introduce C=C double bonds on the CSWs’ surfaces. Then, CSW-g-PMMA was prepared by grafting polymethyl methacrylate (PMMA) onto the surface of modified CSW using in situ dispersion polymerization. The CSW-g-PMMA was used as a filler and melt-blended with polyvinyl chloride (PVC) to prepare PVC-based composites. The surface chemical structure, PMMA grafting rate, and hydrophobic properties of CSW-g-PMMA were analyzed using X-ray diffraction, diffuse reflectance Fourier-transform infrared spectroscopy, thermogravimetric analysis, and water contact angle measurements, respectively. The effects of the CSW-g-PMMA filler on the mechanical properties of the CSW-PMMA/PVC composites were also investigated. The results showed that NaOH treatment significantly increased the number of hydroxyl groups on the surface of the CSWs, which facilitated the introduction of KH570. PMMA was successfully grafted onto the KH570 with a grafting rate of 14.48% onto the surface of the CSWs. The CSW-g-PMMA had good interfacial compatibility and adhesion properties with the PVC matrix. The tensile, flexural, and impact strengths of the CSW-g-PMMA/PVC composite reached 39.28 MPa, 45.69 MPa, and 7.05 kJ/m2, respectively, which were 38.55%, 30.99%, and 20.10% higher than those of the CSW/PVC composite and 54.52%, 40.80%, and 32.52% higher than those of pure PVC, respectively. This work provides a new method for surface modification of inorganic fillers, resource utilization, and high value-added application of CSWs from phosphogypsum

Turn-on Fluorescent InP Nanoprobe for Detection of Cadmium Ions with High Selectivity and Sensitivity

We reported a “turn-on” fluorescent InP nanoprobe for detection of cadmium ions in hydrophobic and hydrophilic media. The method based on the turn-on fluorescence detection of cadmium ions has shown its high selectivity and sensitivity, which are independent of the pH of the tested samples. Also, this approach exhibits an immediate response to cadmium ions, and visualized detection of cadmium ions has further been demonstrated under a UV lamp

Turn-on Fluorescent InP Nanoprobe for Detection of Cadmium Ions with High Selectivity and Sensitivity

We reported a “turn-on” fluorescent InP nanoprobe for detection of cadmium ions in hydrophobic and hydrophilic media. The method based on the turn-on fluorescence detection of cadmium ions has shown its high selectivity and sensitivity, which are independent of the pH of the tested samples. Also, this approach exhibits an immediate response to cadmium ions, and visualized detection of cadmium ions has further been demonstrated under a UV lamp

Deep Sequencing-Based Analysis of the <i>Cymbidium ensifolium</i> Floral Transcriptome

<div><p><i>Cymbidium ensifolium</i> is a Chinese <i>Cymbidium</i> with an elegant shape, beautiful appearance, and a fragrant aroma. <i>C. ensifolium</i> has a long history of cultivation in China and it has excellent commercial value as a potted plant and cut flower. The development of <i>C. ensifolium</i> genomic resources has been delayed because of its large genome size. Taking advantage of technical and cost improvement of RNA-Seq, we extracted total mRNA from flower buds and mature flowers and obtained a total of 9.52 Gb of filtered nucleotides comprising 98,819,349 filtered reads. The filtered reads were assembled into 101,423 isotigs, representing 51,696 genes. Of the 101,423 isotigs, 41,873 were putative homologs of annotated sequences in the public databases, of which 158 were associated with floral development and 119 were associated with flowering. The isotigs were categorized according to their putative functions. In total, 10,212 of the isotigs were assigned into 25 eukaryotic orthologous groups (KOGs), 41,690 into 58 gene ontology (GO) terms, and 9,830 into 126 Arabidopsis Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways, and 9,539 isotigs into 123 rice pathways. Comparison of the isotigs with those of the two related orchid species <i>P. equestris</i> and <i>C. sinense</i> showed that 17,906 isotigs are unique to <i>C. ensifolium</i>. In addition, a total of 7,936 SSRs and 16,676 putative SNPs were identified. To our knowledge, this transcriptome database is the first major genomic resource for <i>C. ensifolium</i> and the most comprehensive transcriptomic resource for genus <i>Cymbidium</i>. These sequences provide valuable information for understanding the molecular mechanisms of floral development and flowering. Sequences predicted to be unique to <i>C. ensifolium</i> would provide more insights into <i>C. ensifolium</i> gene diversity. The numerous SNPs and SSRs identified in the present study will contribute to marker development for <i>C. ensifolium</i>.</p> </div