21 research outputs found
Recommended from our members
Progress towards increased understanding and control of internal transport barriers in DIII-D
Substantial progress has been made towards both understanding and control of internal transport barriers (ITBs) on DIII-D, resulting in the discovery of a new sustained high performance operating mode termed the quiescent double barrier (QDB) regime. The QDB regime combines core transport barriers with a quiescent ELM-free H mode edge (termed QH mode), giving rise to separate (double) core and edge transport barriers. The core and edge barriers are mutually compatible and do not merge, resulting in broad core profiles with an edge pedestal. The QH mode edge is characterized by ELM-free behaviour with continuous multiharmonic MHD activity in the pedestal region and has provided density and radiated power control for longer than 3.5 s (25τE) with divertor pumping. QDB plasmas are long pulse high performance candidates, having maintained a βN H89 product of 7 for five energy confinement times (Ti ≤ 16 keV, βN ≤ 2.9, H89 ≤ 2.4 τE ≤ 150 ms, DD neutron rate Sn ≤ 4 × 1015 s-1). The QDB regime has only been obtained in counter-NBI discharges (injection antiparallel to the plasma current) with divertor pumping. Other results include successful expansion of the ITB radius using (separately) both impurity injection and counter-NBI, and the formation of ITBs in the electron thermal channel using both ECH and strong negative central shear (NCS) at high power. These results are interpreted within a theoretical framework in which turbulence suppression is the key to ITB formation and control, and a decrease in core turbulence is observed in all cases of ITB formation
Recommended from our members
Validation of on- and off-axis neutral beam current drive against experiment in DIII-Da
Neutral beam current drive (NBCD) experiments in DIII-D using vertically shifted plasmas to move the current drive away from the axis have clearly demonstrated robust off-axis NBCD. Time-dependent measurements of magnetic field pitch angles by the motional Stark effect diagnostic are used to obtain the evolution of the poloidal magnetic flux, which indicates a broad off-axis NBCD profile with a peak at about half the plasma minor radius. In most cases, the measured off-axis NBCD profile is consistent with calculations using an orbit-following Monte Carlo code for the beam ion slowing down including finite-orbit effects provided there is no large-scale magnetohydrodynamic activity such as Alfv́n eigenmodes modes or sawteeth. An alternative analysis method shows good agreement between the measured pitch angles and those from simulations using transport-equilibrium codes. Two-dimensional image of Doppler-shifted fast ion Dα light emitted by neutralized energetic ions shows clear evidence for a hollow profile of beam ion density, consistent with classical beam ion slowing down. The magnitude of off-axis NBCD is sensitive to the alignment of the beam injection relative to the helical pitch of the magnetic field lines. If the signs of toroidal magnetic field and plasma current yield the proper helicity, both measurement and calculation indicate that the efficiency is as good as on-axis NBCD because the increased fraction of trapped electrons reduces the electron shielding of the injected ion current, in contrast with electron current drive schemes where the trapping of electrons degrades the efficiency. The measured off-axis NBCD increases approximately linearly with the injection power, although a modest amount of fast ion diffusion is needed to explain an observed difference in the NBCD profile between the measurement and the calculation at high injection power. © 2009 American Institute of Physics
Recommended from our members
Validation of on- and off-axis neutral beam current drive against experiment in DIII-Da
Neutral beam current drive (NBCD) experiments in DIII-D using vertically shifted plasmas to move the current drive away from the axis have clearly demonstrated robust off-axis NBCD. Time-dependent measurements of magnetic field pitch angles by the motional Stark effect diagnostic are used to obtain the evolution of the poloidal magnetic flux, which indicates a broad off-axis NBCD profile with a peak at about half the plasma minor radius. In most cases, the measured off-axis NBCD profile is consistent with calculations using an orbit-following Monte Carlo code for the beam ion slowing down including finite-orbit effects provided there is no large-scale magnetohydrodynamic activity such as Alfv́n eigenmodes modes or sawteeth. An alternative analysis method shows good agreement between the measured pitch angles and those from simulations using transport-equilibrium codes. Two-dimensional image of Doppler-shifted fast ion Dα light emitted by neutralized energetic ions shows clear evidence for a hollow profile of beam ion density, consistent with classical beam ion slowing down. The magnitude of off-axis NBCD is sensitive to the alignment of the beam injection relative to the helical pitch of the magnetic field lines. If the signs of toroidal magnetic field and plasma current yield the proper helicity, both measurement and calculation indicate that the efficiency is as good as on-axis NBCD because the increased fraction of trapped electrons reduces the electron shielding of the injected ion current, in contrast with electron current drive schemes where the trapping of electrons degrades the efficiency. The measured off-axis NBCD increases approximately linearly with the injection power, although a modest amount of fast ion diffusion is needed to explain an observed difference in the NBCD profile between the measurement and the calculation at high injection power. © 2009 American Institute of Physics
Recommended from our members
Off-axis neutral beam current drive for advanced scenario development in DIII-D
Modification of the two existing DIII-D neutral beamlines is planned to allow vertical steering to provide off-axis neutral beam current drive (NBCD) peaked as far off-axis as half the plasma minor radius. New calculations for a downward-steered beam indicate strong current drive with good localization off-axis so long as the toroidal magnetic field, BT, and the plasma current, Ip, point in the same direction. This is due to good alignment of neutral beam injection (NBI) with the local pitch of the magnetic field lines. This model has been tested experimentally on DIII-D by injecting equatorially mounted NBs into reduced size plasmas that are vertically displaced with respect to the vessel midplane. The existence of off-axis NBCD is evident in the changes seen in sawtooth behaviour in the internal inductance. By shifting the plasma upwards or downwards, or by changing the sign of the toroidal field, off-axis NBCD profiles measured with motional Stark effect data and internal loop voltage show a difference in amplitude (40-45%) consistent with differences predicted by the changed NBI alignment with respect to the helicity of the magnetic field lines. The effects of NBI direction relative to field line helicity can be large even in ITER: off-axis NBCD can be increased by more than 30% if the BT direction is reversed. Modification of the DIII-D NB system will strongly support scenario development for ITER and future tokamaks as well as provide flexible scientific tools for understanding transport, energetic particles and heating and current drive. © 2009 IAEA, Vienna
Recommended from our members
Off-axis neutral beam current drive for advanced scenario development in DIII-D
Modification of the two existing DIII-D neutral beamlines is planned to allow vertical steering to provide off-axis neutral beam current drive (NBCD) peaked as far off-axis as half the plasma minor radius. New calculations for a downward-steered beam indicate strong current drive with good localization off-axis so long as the toroidal magnetic field, B , and the plasma current, I , point in the same direction. This is due to good alignment of neutral beam injection (NBI) with the local pitch of the magnetic field lines. This model has been tested experimentally on DIII-D by injecting equatorially mounted NBs into reduced size plasmas that are vertically displaced with respect to the vessel midplane. The existence of off-axis NBCD is evident in the changes seen in sawtooth behaviour in the internal inductance. By shifting the plasma upwards or downwards, or by changing the sign of the toroidal field, off-axis NBCD profiles measured with motional Stark effect data and internal loop voltage show a difference in amplitude (40-45%) consistent with differences predicted by the changed NBI alignment with respect to the helicity of the magnetic field lines. The effects of NBI direction relative to field line helicity can be large even in ITER: off-axis NBCD can be increased by more than 30% if the B direction is reversed. Modification of the DIII-D NB system will strongly support scenario development for ITER and future tokamaks as well as provide flexible scientific tools for understanding transport, energetic particles and heating and current drive. © 2009 IAEA, Vienna. T p
Recommended from our members
Progress toward fully noninductive, high beta conditions in DIII-D
The DIII-D Advanced Tokamak (AT) program in the DIII-D tokamak [J. L. Luxon, Plasma Physics and Controlled Fusion Research, 1986, Vol. I (International Atomic Energy Agency, Vienna, 1987), p. 159] is aimed at developing a scientific basis for steady-state, high-performance operation in future devices. This requires simultaneously achieving 100% noninductive operation with high self-driven bootstrap current fraction and toroidal beta. Recent progress in this area includes demonstration of 100% noninductive conditions with toroidal beta, ΒT =3.6%, normalized beta, ΒN =3.5, and confinement factor, H89 =2.4 with the plasma current driven completely by bootstrap, neutral beam current drive, and electron cyclotron current drive (ECCD). The equilibrium reconstructions indicate that the noninductive current profile is well aligned, with little inductively driven current remaining anywhere in the plasma. The current balance calculation improved with beam ion redistribution that was supported by recent fast ion diagnostic measurements. The duration of this state is limited by pressure profile evolution, leading to magnetohydrodynamic (MHD) instabilities after about 1 s or half of a current relaxation time (τCR). Stationary conditions are maintained in similar discharges (∼90% noninductive), limited only by the 2 s duration (1 τCR) of the present ECCD systems. By discussing parametric scans in a global parameter and profile databases, the need for low density and high beta are identified to achieve full noninductive operation and good current drive alignment. These experiments achieve the necessary fusion performance and bootstrap fraction to extrapolate to the fusion gain, Q=5 steady-state scenario in the International Thermonuclear Experimental Reactor (ITER) [R. Aymar, Fusion Energy Conference on Controlled Fusion and Plasma Physics, Sorrento, Italy (International Atomic Energy Agency, Vienna, 1987), paper IAEA-CN-77/OV-1]. The modeling tools that have been successfully employed to both plan and interpret the experiment are used to plan future DIII-D experiments with higher power and longer pulse ECCD and fast wave and co- and counterneutral beam injection in a pumped double-null configuration. The models predict our ability to control the current and pressure profiles to reach full noninductivity with increased beta, bootstrap fraction, and duration. The same modeling tools are applied to ITER, predicting favorable prospects for the success of the ITER steady-state scenario. © 2006 American Institute of Physics
Recommended from our members
Long pulse high performance discharges in the DIII-D tokamak
Significant progress in obtaining high performance discharges lasting many energy confinement times in the DIII-D tokamak has been realized in recent experimental campaigns. Normalized performance ∼10 has been sustained for more than 5> with q > 1.5. (The normalized performance is measured by the product β H , indicating the proximity to the conventional β limits and energy confinement quality, respectively.) These H mode discharges have an ELMing edge and β < 5%. The limit to increasing β is a resistive wall mode, rather than the tearing modes as previously observed. Confinement remains good despite q > 1. The global parameters were chosen to optimize the potential for fully non-inductive current sustainment at high performance, which is a key program goal for the DIII-D facility. Measurement of the current density and loop voltage profiles indicate that ≈75% of the current in the present discharges is sustained non-inductively. The remaining ohmic current is localized near the half-radius. The electron cyclotron heating system is being upgraded to replace this remaining current with ECCD. Density and β control, which are essential for operating advanced tokamak discharges, were demonstrated in ELMing H mode discharges with β H ≈ 7 for up to 6.3 s or ≈34τ . These discharges appear to have stationary current profiles with q ≈ 1.05 in agreement with the current profile relaxation time ≈1.8 s. E min N 89 min N 89 E mi
Recommended from our members
Progress towards high-performance steady-state operation on DIII-D
Advanced Tokamak research in DIII-D seeks to develop a scientific basis for steady-state high-performance tokamak operation. Fully noninductive (fNI ≈ 100%) in-principle steady-state discharges have been maintained for several confinement times. These plasmas have weak negative central shear with qmin ≈ 1.5-2, βN ≈ 3.5, and large, well-aligned bootstrap current. The loop voltage is near zero across the entire profile. The remaining current is provided by neutral beam current drive (NBCD) and electron cyclotron current drive (ECCD). Similar plasmas are stationary with fNI ≈ 90-95% and duration up to 2 s, limited only by hardware. In other experiments, βN ≈ 4 is maintained for 2 s with internal transport barriers, exceeding previously achieved performance under similar conditions. This is allowed by broadened profiles and active magnetohydrodynamic instability control. Modifications now underway on DIII-D are expected to allow extension of these results to higher performance and longer duration. A new pumped divertor will allow density control in high triangularity double-null divertor configurations, facilitating access to similar in-principle steady-state regimes with βN > 4. Additional current drive capabilities, both off-axis ECCD and on-axis fast wave current drive (FWCD), will increase the magnitude, duration, and flexibility of externally driven current. © 2006 Elsevier B.V. All rights reserved
Recommended from our members
Higher fusion power gain with profile control in DIII-D tokamak plasmas
Strong shaping, favourable for stability and improved energy confinement, together with a significant expansion of the central region of improved confinement in negative central magnetic shear target plasmas, increased the maximum fusion power produced in DIII-D by a factor of 3. Using deuterium plasmas, the highest fusion power gain, the ratio of fusion power to input power, Q, was 0.0015, corresponding to an equivalent Q of 0.32 in a deuterium-tritium plasma, which is similar to values achieved in tokamaks of larger size and magnetic field. A simple transformation relating Q to the stability parameters is presented