Significant progress in obtaining high performance discharges lasting many energy confinement times in the DIII-D tokamak has been realized in recent experimental campaigns. Normalized performance ∼10 has been sustained for more than 5> with q > 1.5. (The normalized performance is measured by the product β H , indicating the proximity to the conventional β limits and energy confinement quality, respectively.) These H mode discharges have an ELMing edge and β < 5%. The limit to increasing β is a resistive wall mode, rather than the tearing modes as previously observed. Confinement remains good despite q > 1. The global parameters were chosen to optimize the potential for fully non-inductive current sustainment at high performance, which is a key program goal for the DIII-D facility. Measurement of the current density and loop voltage profiles indicate that ≈75% of the current in the present discharges is sustained non-inductively. The remaining ohmic current is localized near the half-radius. The electron cyclotron heating system is being upgraded to replace this remaining current with ECCD. Density and β control, which are essential for operating advanced tokamak discharges, were demonstrated in ELMing H mode discharges with β H ≈ 7 for up to 6.3 s or ≈34τ . These discharges appear to have stationary current profiles with q ≈ 1.05 in agreement with the current profile relaxation time ≈1.8 s. E min N 89 min N 89 E mi
