423 research outputs found
Strategy for the identification of micro-organisms producing food and feed products : bacteria producing food enzymes as study case
Recent European regulations require safety assessments of food enzymes (FE) before their commercialization. FE are mainly produced by micro-organisms, whose viable strains nor associated DNA can be present in the final products. Currently, no strategy targeting such impurities exists in enforcement laboratories. Therefore, a generic strategy of first line screening was developed to detect and identify, through PCR amplification and sequencing of the 16S-rRNA gene, the potential presence of FE producing bacteria in FE preparations. First, the specificity was verified using all microbial species reported to produce FE. Second, an in-house database, with 16S reference sequences from bacteria producing FE, was constructed for their fast identification through blast analysis. Third, the sensitivity was assessed on a spiked FE preparation. Finally, the applicability was verified using commercial FE preparations. Using straightforward PCR amplifications, Sanger sequencing and blast analysis, the proposed strategy was demonstrated to be convenient for implementation in enforcement laboratories
Discrimination of three genetically close Aspergillus species by using high resolution melting analysis applied to indoor air as case study.
peer reviewedBACKGROUND: Indoor air pollution caused by fungal contamination is suspected to have a public health impact. Monitoring of the composition of the indoor airborne fungal contaminants is therefore important. To avoid problems linked to culture-dependent protocols, molecular methods are increasingly being proposed as an alternative. Among these molecular methods, the polymerase chain reaction (PCR) and the real-time PCR are the most frequently used tools for indoor fungal detection. However, even if these tools have demonstrated their appropriate performance, some of them are not able to discriminate between species which are genetically close. A solution to this could be the use of a post-qPCR high resolution melting (HRM) analysis, which would allow the discrimination of these species based on the highly accurate determination of the difference in melting temperature of the obtained amplicon. In this study, we provide a proof-of-concept for this approach, using a dye adapted version of our previously developed qPCR SYBR(R)Green method to detect Aspergillus versicolor in indoor air, an important airborne fungus in terms of occurrence and cause of health problems. Despite the good performance observed for that qPCR method, no discrimination could previously be made between A. versicolor, Aspergillus creber and Aspergillus sydowii. METHODS: In this study, we developed and evaluated an HRM assay for the discrimination between A. versicolor, Aspergillus creber and Aspergillus sydowii. RESULTS: Using HRM analysis, the discrimination of the 3 Aspergillus species could be made. No false positive, nor false negatives were observed during the performance assessment including 20 strains of Aspergillus. The limit of detection was determined for each species i.e., 0.5 pg of gDNA for A. creber and A. sydowii, and 0.1 pg of gDNA for A. versicolor. The HRM analysis was also successfully tested on environmental samples. CONCLUSION: We reported the development of HRM tools for the discrimination of A. versicolor, A. creber and A. sydowii. However, this study could be considered as a study case demonstrating that HRM based on existing qPCR assays, allows a more accurate identification of indoor air contaminants. This contributes to an improved insight in the diversity of indoor airborne fungi and hence, eventually in the causal link with health problems
A genoserotyping system for a fast and objective identification of Salmonella serotypes commonly isolated from poultry and pork food sectors in Belgium
Humans are mostly contaminated by Salmonella through the consumption of pork- and poultry-derived food products. Therefore, a strict monitoring of Salmonella serotypes in food-producing animals is needed to limit the transmission of the pathogen to humans. Additionally, Salmonella can lead to economic loss in the food sector. Previously, a genoserotyping method using the MOL-PCR and Luminex technology was developed for the identification of the 6 Salmonella serotypes, and their variants, subjected to an official control in the Belgian food sector. In this study, 3 additional assays using the same technology were developed for the rapid and cost-effective detection of 13 dangerous highly invasive serotypes or other serotypes frequently isolated from the Belgian poultry and pork sector, i.e. Agona, Anatum, Brandenburg, Choleraesuis, Derby, Enteritidis vaccine strains, Gallinarum var. Gallinarum/Pullorum, Livingstone, Mbandaka, Minnesota, Ohio, Rissen and Senftenberg. Moreover, the previously developed first MOL-PCR assay was improved for S. Paratyphi B and serogroup O:3 detection. Finally, a Decision Support System hosted by a web application was created for an automatic and objective interpretation of the Luminex raw data. The 3 new assays and the modifications of the first assay were validated with a 100% accuracy, using 553 Salmonella and non-Salmonella strains in total
Perceived utility and feasibility of pathogen genomics for public health practice : a survey among public health professionals working in the field of infectious diseases, Belgium, 2019
Background
Pathogen genomics is increasingly being translated from the research setting into the activities of public health professionals operating at different levels. This survey aims to appraise the literacy level and gather the opinions of public health experts and allied professionals working in the field of infectious diseases in Belgium concerning the implementation of next-generation sequencing (NGS) in public health practice.
Methods
In May 2019, Belgian public health and healthcare professionals were invited to complete an online survey containing eight main topics including background questions, general attitude towards pathogen genomics for public health practice and main concerns, genomic literacy, current and planned NGS activities, place of NGS in diagnostic microbiology pathways, data sharing obstacles, end-user requirements, and key drivers for the implementation of NGS. Descriptive statistics were used to report on the frequency distribution of multiple choice responses whereas thematic analysis was used to analyze free text responses. A multivariable logistic regression model was constructed to identify important predictors for a positive attitude towards the implementation of pathogen genomics in public health practice.
Results
146 out of the 753 invited public health professionals completed the survey. 63% of respondents indicated that public health agencies should be using genomics to understand and control infectious diseases. Having a high level of expertise in the field of pathogen genomics was the strongest predictor of a positive attitude (OR = 4.04, 95% CI = 1.11 – 17.23). A significantly higher proportion of data providers indicated to have followed training in the field of pathogen genomics compared to data end-users (p < 0.001). Overall, 79% of participants expressed interest in receiving further training. Main concerns were related to the cost of sequencing technologies, data sharing, data integration, interdisciplinary working, and bioinformatics expertise.
Conclusions
Belgian health professionals expressed favorable views about implementation of pathogen genomics in their work activities related to infectious disease surveillance and control. They expressed the need for suitable training initiatives to strengthen their competences in the field. Their perception of the utility and feasibility of pathogen genomics for public health purposes will be a key driver for its further implementation
Strain-level metagenomic data analysis of enriched in vitro and in silico spiked food samples : paving the way towards a culture-free foodborne outbreak investigation using STEC as a case study
Culture-independent diagnostics, such as metagenomic shotgun sequencing of food samples, could not only reduce the turnaround time of samples in an outbreak investigation, but also allow the detection of multi-species and multi-strain outbreaks. For successful foodborne outbreak investigation using a metagenomic approach, it is, however, necessary to bioinformatically separate the genomes of individual strains, including strains belonging to the same species, present in a microbial community, which has up until now not been demonstrated for this application. The current work shows the feasibility of strain-level metagenomics of enriched food matrix samples making use of data analysis tools that classify reads against a sequence database. It includes a brief comparison of two database-based read classification tools, Sigma and Sparse, using a mock community obtained by in vitro spiking minced meat with a Shiga toxin-producing Escherichia coli (STEC) isolate originating from a described outbreak. The more optimal tool Sigma was further evaluated using in silico simulated metagenomic data to explore the possibilities and limitations of this data analysis approach. The performed analysis allowed us to link the pathogenic strains from food samples to human isolates previously collected during the same outbreak, demonstrating that the metagenomic approach could be applied for the rapid source tracking of foodborne outbreaks. To our knowledge, this is the first study demonstrating a data analysis approach for detailed characterization and phylogenetic placement of multiple bacterial strains of one species from shotgun metagenomic WGS data of an enriched food sample
First detection of a plasmid located carbapenem resistant bla(VIM-1) gene in E. coli isolated from meat products at retail in Belgium in 2015
Carbapenemase-producing Enterobacteriaceae (CPE) confer resistance to antibiotics that are of critical importance to human medicine. There have only been a few reported cases of CPEs in the European food chain. We report the first detection of a carbapenemase-producing Escherichia coli (ST 5869) in the Belgian food chain. Our aim was to characterize the origin of the carbapenem resistance in the E. coli isolate. The isolate was detected during the screening of 178 minced pork samples and was shown to contain the carbapenemase gene bla(VIM-1) by PCR and Sanger sequencing. Whole genome short and long read sequencing (MiSeq and MinION) was performed to characterize the isolate. With a hybrid assembly we reconstructed a 190,205 bp IncA/C2 plasmid containing bla(VIM-1) (S15FP06257_p), in addition to other critically important resistance genes. This plasmid showed only low similarity to plasmids containing bla(VIM-1) previously reported in Germany. Moreover, no sequences existed in the NCBI nucleotide database that completely covered S15FP06257_p. Analysis of the bla(VIM-1) gene cassette demonstrated that it likely originated from an integron of a Klebsiella plasmid reported previously in a clinical isolate in Europe, suggesting that the meat could have been contaminated by human handling in one of the steps of the food chain. This study shows the relevance of fully reconstructing plasmids to characterize their genetic content and to allow source attribution. This is especially important in view of the potential risk of antimicrobial resistance gene transmission through mobile elements as was reported here for the of public health concern bla(VIM-1)
A practical method to implement strain-level metagenomics-based foodborne outbreak investigation and source tracking in routine
The management of a foodborne outbreak depends on the rapid and accurate identification of the responsible food source. Conventional methods based on isolation of the pathogen from the food matrix and target-specific real-time polymerase chain reactions (qPCRs) are used in routine. In recent years, the use of whole genome sequencing (WGS) of bacterial isolates has proven its value to collect relevant information for strain characterization as well as tracing the origin of the contamination by linking the food isolate with the patient’s isolate with high resolution. However, the isolation of a bacterial pathogen from food matrices is often time-consuming and not always successful. Therefore, we aimed to improve outbreak investigation by developing a method that can be implemented in reference laboratories to characterize the pathogen in the food vehicle without its prior isolation and link it back to human cases. We tested and validated a shotgun metagenomics approach by spiking food pathogens in specific food matrices using the Shiga toxin-producing Escherichia coli (STEC) as a case study. Different DNA extraction kits and enrichment procedures were investigated to obtain the most practical workflow. We demonstrated the feasibility of shotgun metagenomics to obtain the same information as in ISO/TS 13136:2012 and WGS of the isolate in parallel by inferring the genome of the contaminant and characterizing it in a shorter timeframe. This was achieved in food samples containing different E. coli strains, including a combination of different STEC strains. For the first time, we also managed to link individual strains from a food product to isolates from human cases, demonstrating the power of shotgun metagenomics for rapid outbreak investigation and source tracking
The benefits of whole genome sequencing for foodborne outbreak investigation from the perspective of a national reference laboratory in a smaller country
Gradually, conventional methods for foodborne pathogen typing are replaced by whole genome sequencing (WGS). Despite studies describing the overall benefits, National Reference Laboratories of smaller countries often show slower uptake of WGS, mainly because of significant investments required to generate and analyze data of a limited amount of samples. To facilitate this process and incite policy makers to support its implementation, a Shiga toxin-producing Escherichia coli (STEC) O157:H7 (stx1+, stx2+, eae+) outbreak (2012) and a STEC O157:H7 (stx2+, eae+) outbreak (2013) were retrospectively analyzed using WGS and compared with their conventional investigations. The corresponding results were obtained, with WGS delivering even more information, e.g., on virulence and antimicrobial resistance genotypes. Besides a universal, all-in-one workflow with less hands-on-time (five versus seven actual working days for WGS versus conventional), WGS-based cgMLST-typing demonstrated increased resolution. This enabled an accurate cluster definition, which remained unsolved for the 2013 outbreak, partly due to scarce epidemiological linking with the suspect source. Moreover, it allowed detecting two and one earlier circulating STEC O157:H7 (stx1+, stx2+, eae+) and STEC O157:H7 (stx2+, eae+) strains as closely related to the 2012 and 2013 outbreaks, respectively, which might have further directed epidemiological investigation initially. Although some bottlenecks concerning centralized data-sharing, sampling strategies, and perceived costs should be considered, we delivered a proof-of-concept that even in smaller countries, WGS offers benefits for outbreak investigation, if a sufficient budget is available to ensure its implementation in surveillance. Indeed, applying a database with background isolates is critical in interpreting isolate relationships to outbreaks, and leveraging the true benefit of WGS in outbreak investigation and/or prevention
Combining short and long read sequencing to characterize antimicrobial resistance genes on plasmids applied to an unauthorized genetically modified Bacillus
Antimicrobial resistance (AMR) is a major public health threat. Plasmids are able to transfer AMR genes among bacterial isolates. Whole genome sequencing (WGS) is a powerful tool to monitor AMR determinants. However, plasmids are difficult to reconstruct from WGS data. This study aimed to improve the characterization, including the localization of AMR genes using short and long read WGS strategies. We used a genetically modified (GM) Bacillus subtilis isolated as unexpected contamination in a feed additive, and therefore considered unauthorized (RASFF 2014.1249), as a case study. In GM organisms, AMR genes are used as selection markers. Because of the concern of spread of these AMR genes when present on mobile genetic elements, it is crucial to characterize their location. Our approach resulted in an assembly of one chromosome and one plasmid, each with several AMR determinants of which five are against critically important antibiotics. Interestingly, we found several plasmids, containing AMR genes, integrated in the chromosome in a repetitive region of at least 53 kb. Our findings would have been impossible using short reads only. We illustrated the added value of long read sequencing in addressing the challenges of plasmid reconstruction within the context of evaluating the risk of AMR spread
Fusion of EML1 to ABL1 in T-cell acute lymphoblastic leukemia with cryptic t(9;14)(q34;q32)
The BCR-ABL1 fusion kinase is frequently associated with chronic myeloid leukemia and B-cell acute lymphoblastic leukemia but is rare in T-cell acute lymphoblastic leukemia (T-ALL). We recently identified NUP214-ABL1 as a variant ABL1 fusion gene in 6% of T-ALL patients. Here we describe the identification of another ABL1 fusion, EML1-ABL1, in a T-ALL patient with a cryptic t(9;14)(q34;q32) associated with deletion of CDKN2A (p16) and expression of TLX1 (HOX11). Echinoderm microtubule-associated protein-like 1-Abelson 1 (EML1-ABL1) is a constitutively phosphorylated tyrosine kinase that transforms Ba/F3 cells to growth factor-independent growth through activation of survival and proliferation pathways, including extracellular signal-related kinase 1/2 (Erk1/2), signal transducers and activators of transcription 5 (Stat5), and Lyn kinase. Deletion of the coiled-coil domain of EML1 abrogated the transforming properties of the fusion kinase. EML1-ABL1 and breakpoint cluster region (BCR)-ABL1 were equally sensitive to the tyrosine kinase inhibitor imatinib. These data further demonstrate the involvement of ABL1 fusions in the pathogenesis of T-ALL and identify EML1-ABL1 as a novel therapeutic target of imatinib
- …