Extraction socket preservation using porcine-derived collagen membrane alone or associated with porcine-derived bone. Clinical results of randomized controlled study

The aim of present randomized controlled clinical trial was to clinically evaluate hard tissue changes after extraction socket preservation procedures compared to natural spontaneous healing

Implant survival and success rates in patients with risk factors: results from a long-term retrospective study with a 10 to 18 years follow-up

OBJECTIVE: Risk factors for implant therapy are represented by all general and local conditions that through various mechanisms can increase either short-term and long-term failure risk. The aim of this study is to assess the implant survival and implant success rates with single and multiple risk factors. PATIENTS AND METHODS: To address the research purpose, a retrospective cohort study was designed and implemented, including a sample of 225 patients with a total of 871 implants placed. The following risk factors were considered: smoking, bruxism, bone augmentation procedures and the presence of load risk (implants with crown/implant relation > 0.8; angulation > 25°; presence of cantilever). Follow-up ranged from 10 years to 18 years (average follow-up 13.6 years). Failures were subdivided into short-term failures, before the prosthetic phase, and long-term failures, after definitive prosthesis. The success criteria published by Albrektsson and Zarb were adopted. A Cox proportional hazard regression model was used to calculate hazard ratio, with a statistically significant p-value <0.05. RESULTS: Out of the 871 implants placed, 138 did not meet the success criteria, (success rate 84.16%), sixty (43.47%) were classified as "early failure" and seventy-eight as "late failure" (56.53%). A total of 70 dental implants were removed, with a survival rate of 91.96%. CONCLUSIONS: The presence of a single risk factor does not imply a marked increase of failure risk. Among the analyzed factors, the one that proved to be the most dangerous was bruxism, even when presented as the only risk factor. Bruxism with load risk proved to be the most dangerous association (success rate 69.23%) and could be included among the absolute contraindications for implant treatment

A randomized clinical trial about presence of pathogenic microflora and risk of peri-implantitis: comparison of two different types of implant-abutment connections

OBJECTIVE: The aim of this in vivo study was to evaluate two different types of implant-abutment connections: screwed connection and cemented connection, analyzing peri-implant bacteria microflora as well as other clinical parameters. PATIENTS AND METHODS: Twenty implants were selected, inserted in 20 patients, 10 with a screwed implant-abutment connection (Group 1) and 10 with a cemented implant-abutment connection (Group 2). The peri-implant microflora was collected, after at least 360 days from the prosthetic rehabilitation, using paper points inserted in peri-implant sulcus for 30 s. Polymerase chain reaction (PCR) Real-time analyzed the presence of 9 bacteria periodontal-pathogens and Candida albicans. RESULTS: Our findings showed that bacteria colonized all Groups analyzed, the average bacterial count was 3.7 E +08 (±1.19) in Group 1, compared to 2.1 E +08 (±0.16) in Group 2; no statistically significant differences were observed (p>0.0.5). In Group 1, however, bacterial colonization of peri-implant sulci was over the pathogenic threshold for 5 bacteria, indicating a high-risk of peri-implantitis. Also in Group 2, results showed a microflora composed by all bacteria analyzed but, in this case, bacterial colonization of peri-implant sulci was over the pathogenic threshold for only 1 bacterium, indicating a lower risk of peri-implantitis. Moreover, clinical parameters (PPD > 3 mm and m SBI > 0) confirmed a greater risk of peri-implantitis in Group 1 compared to Group 2 (p<0.05). CONCLUSIONS: We concluded that, also after only 360 days, implants with screwed connection showed a higher risk of peri-implantitis that implants with cemented connection

Bone healing in extraction sockets covered with collagen membrane alone or associated with porcine-derived bone graft: a comparative histological and histomorphometric analysis

The present paper reports data of a randomized study aimed to analyse and compare the histologic and histomorphometric aspects of bone healing in extraction sites covered with collagen membrane alone or associated with porcine-derived bone graft

Effect of airborne particle abrasion on microtensile bond strength of total-etch adhesives to human dentin

Aim of this study was to investigate a specific airborne particle abrasion pretreatment on dentin and its effects on microtensile bond strengths of four commercial total-etch adhesives. Midcoronal occlusal dentin of extracted human molars was used. Teeth were randomly assigned to 4 groups according to the adhesive system used: OptiBond FL (FL), OptiBond Solo Plus (SO), Prime & Bond (PB), and Riva Bond LC (RB). Specimens from each group were further divided into two subgroups: control specimens were treated with adhesive procedures; abraded specimens were pretreated with airborne particle abrasion using 50 mu m Al2O3 before adhesion. After bonding procedures, composite crowns were incrementally built up. Specimens were sectioned perpendicular to adhesive interface to producemultiple beams, which were tested under tension until failure. Data were statistically analysed. Failure mode analysis was performed. Overall comparison showed significant increase in bond strength (p < 0.001) between abraded and no-abraded specimens, independently of brand. Intrabrand comparison showed statistical increase when abraded specimens were tested compared to no-abraded ones, with the exception of PB that did not show such difference. Distribution of failure mode was relatively uniform among all subgroups. Surface treatment by airborne particle abrasion with Al2O3 particles can increase the bond strength of total-etch adhesive

Accuracy and precision of an intraoral scanner in complex prosthetic rehabilitations: an in vitro study

The main purpose of this study is to measure the accuracy and the precision of the intraoral optical scanner CS3500® (Carestream Dental LLC, Atlanta, USA) in complex clinical situations as full arch rehabilitations on impl ants. 50 scans of the acrylic resin model were performed by using CS3500® (Carestream Dental LLC, Atlanta, USA) scanner. Each scan was compared with the virtual model derived from scanning with the laboratory scanner Dscan3® (Enhanced Geometry Soluti on, Bologna, Italy) to measure a possible misalignment. The alignment error was found to be 79,6 ( ± 12,87)  m. The measurement was taken at the level of 2 distal scan - abutments. The scanner's precision ranges from 24 to 52  m , depending on the dist ance between scan - abutment. CS3500® (Carestream Dental LLC, Atlanta, USA) intraoral scanner has detected a valid device in the execution of complex rehabilitations on implants. His accuracy and precision values fall within the range established in li terature to define acceptable the prosthetic fitting on full arch implant rehabilitation

Influence of the oral status on cardiovascular diseases in an older Italian population

Oral diseases have been adversely associated with cardiovascular diseases (CVD), which are also the most frequent cause of death in older population. The aim of this study was to investigate the association among oral status indexes and CVD in patients aged more than 65 years attending in the Oral department of a public hospital Policlinico Umberto 1 of Rome. The study population consisted of 533 patients. Dental status was detected measuring the Decayed, Missing, and Filled Teeth (DMFT) and Community Periodontal Index (CPI) indexes. The chi-square test with a 95% confidence level was used to assess qualitative variables. Odds ratios (ORs) and stepwise logistic regression were used to calculate risk estimates; the independent variables: age, gender, DMFT, CPI index, Geriatric Oral Health Assessment Index (GOHAI) score, and tooth loss were included in the statistical model. P value &lt;0.05 was considered a statistically significant cut-off. No differences were found between females and males for DMFT and CPI. GOHAI data were worst for females. Patients with CVD had less education and oral care (P &lt; 0.05), and higher CPI index and number of missing teeth (P &lt; 0.05). Data show that patients with more than 18 missing teeth have 2.5 times greater risk of CVD. CVDs are associated with type 2 diabetes mellitus, underweight, and obesity (P &lt; 0.05). From the findings of this study, it can be confirmed a significant link between CVD and oral health. A cooperation among geriatrician, cardiologist, and dentist is suitable to counteract the development of CVD and to early identify patients at risk of CVD

Viral Cirrhosis: an Overview of Haemostatic Alterations and Clinical Consequences

Viral hepatitis is a major health problem worldwide, the principal cause of cirrhosis and hepatocarcinoma. Once cirrhosis occurs, the consequences of liver dysfunction and portal hypertension become evident and, sometimes, life threatening for patients. Among the various complications of liver cirrhosis, the alteration of haemostatic balance is often a hard challenge for the clinician, since it is capable to predispose both to bleeding or thrombosis. In this review, we analyze the principal aspects of procoagulant, anticoagulant and fibrinolytic capacity of cirrhotic patients, which appears to be variably altered in all these aspects, not only in the direction of a tendency to bleeding. Laboratory investigations, at present, may provide only a partial representation of this condition, because of the impossibility to obtain a test capable to furnish a global overview of the haemostatic system and to reproduce in vivo conditions. Furthermore, we describe the pathophysiological mechanisms underlying bleeding manifestations and thrombosis development in cirrhotic patients, which should be considered not only as obvious consequences of the advanced liver disease but, rather, as the result of a complex interaction between inherited and acquired factors

Accounting for attitudes and perceptions influencing users' willingness to purchase Electric Vehicles through a Hybrid Choice Modeling approach based on Analytic Hierarchy Process

n/

Coupling traffic models on networks and urban dispersion models for simulating sustainable mobility strategies

AbstractThe aim of the present paper is to investigate the viability of macroscopic traffic models for modeling and testing different traffic scenarios, in order to define the impact on air quality of different strategies for the reduction of traffic emissions. To this aim, we complement a well assessed traffic model on networks (Garavello and Piccoli (2006) [1]) with a strategy for estimating data needed from the model and we couple it with the urban dispersion model Sirane (Soulhac (2000) [2])