Charging damage in floating metal-insulator-metal capacitors

In this paper, charging induced damage (CID) to metal-insulator-metal capacitors (MIMC) is reported. The damage is caused by the build up of a voltage potential difference between the two plates of the capacitor. A simple logarithmic relation is discovered between the damage by this voltage potential and the ratio of the area of the exposed antennas connected to the plates of the MIMC. This function allows anticipation of damage in MIMC devices with long interconnects. The source of the damage is still the subject of further investigatio

Plasma damage in floating metal-insulator-metal capacitors

In this paper, charging induced damage (CID) to metal-insulator-metal capacitors (MIMCs), is reported. CID does not necessarily lead to direct yield loss, but may also induce latent damage leading to reliability losses. The damage is caused by the build up of a voltage potential difference between the two plates of the capacitor. A simple logarithmic relation is discovered between the damage by this voltage potential and the ratio of the area of the exposed antennas connected to the plates of the MIMC. This function allows anticipation of damage in MIMCs with long interconnect

Wafer-level packaged RF-MEMS switches fabricated in a CMOS fab

Reports on wafer-level packaged RF-MEMS switches fabricated in a commercial CMOS fab. Switch fabrication is based on a metal surface micromachining process. A novel wafer-level packaging scheme is developed, whereby the switches are housed in on-chip sealed cavities using benzocyclobutene (BCB) as the bonding and sealing material. Measurements show that the influence of the wafer-level package on the RF performance can be made very small.\ud \u

Building Capacity in Nonprofit Organizations

Offers a capacity building model that is based on a review of civil society, sustainable development, and organizational management literature. Reviews effective capacity building programs sponsored or operated by foundations. Includes recommendations

Reproducibility and validity of a diet quality index for children assessed using a FFQ

The diet quality index (DQI) for preschool children is a new index developed to reflect compliance with four main food-based dietary guidelines for preschool children in Flanders. The present study investigates: (1) the validity of this index by comparing DQI scores for preschool children with nutrient intakes, both of which were derived from 3d estimated diet records; (2) the reproducibility of the DQI for preschoolers based on a parentally reported forty-seven-item FFQ DQI, which was repeated after 5 weeks; (3) the relative validity of the FFQ DQI with 3d record DQI scores as reference. The study sample included 510 and 58 preschoolers (2-5-6.5 years) for validity and reproducibility analyses, respectively. Increasing 3d record DQI scores were associated with decreasing consumption of added sugars, and increasing intakes of fibre, water, Ca and many micronutrients. Mean FFQ DQI test-retest scores were not significantly different: 72 (so 11) v. 71 (Si) 10) (P-=0-218) out of a maximum of 100. Mean 3d record DQI score (66 (so 10)) was significantly lower than mean FFQ DQI (71 (so 10);

Plasma charging damage reduction in IC processing by a self-balancing interconnect

A small TPC has been read out by means of a Medipix2 chip as direct anode. A Micromegas foil was placed Click to view the MathML source above the chip, and electron multiplication occurred in the gap. With a He/isobutane 80/20 mixture, gas multiplication factors up to tens of thousands were achieved, resulting in an efficiency for detecting single electrons of better than 90%. With this new readout technology for gas-filled detectors we recorded many image frames containing 2D images with tracks from cosmic muons. Along these tracks, electron clusters were observed, as well as ?-rays. With a gas layer thickness of only 1 mm, the device could be applied as vertex detector, outperforming all Si-based detectors

New European guidelines for the management of dyslipidaemia in cardiovascular prevention

The new guidelines from the European Atherosclerosis Society and the European Society of Cardiology include a number of updated items. In this paper, we summarize 4 of these changes that we consider to be the most pertinent. Firstly, cardiovascular risk is now stratified according to 4 (previously 2) categories: "very high risk" (patients with cardiovascular disease, patients with diabetes > 40 years old who have at least one other risk factor, patients with kidney failure, or patients in primary prevention with a SCORE value > or = 10%); "high risk" (patients in primary prevention with a SCORE value > or = 5% and or = 1% and < 5%); and "low risk" (primary prevention with SCORE < 1%). The SCORE value for patients in primary prevention is estimated using the SCORE table (calibrated for Belgium). Risk in this table may now be corrected according to HDL cholesterol level. Secondly, the therapeutic targets for each category are now more stringent: LDL cholesterol < 70 mg/dl (or reduced by at least 50%) if the risk is "very high"; < 100 mg/dl if the risk is "high"; and < 115 mg/dl if the risk is "moderate". Thirdly, for patients at "high" or "very high" risk, particularly in patients with combined dyslipidaemia, two further therapeutic targets should be considered: non-HDL cholesterol and apolipoprotein B levels. Fourthly, the follow-up of efficacy (lipid profile) and tolerance (hepatic and muscular enzymes) is described in more details so as to harmonize case management in clinical practice.Peer reviewe

Влияние электромагнитного состояния турбоагрегата на работоспособность его узлов. Диагностика, демагнитезация

Рассмотрены условия возникновения электроэрозионных повреждений узлов турбоагрегатов, а так же их характерные признаки. Даны рекомендации по диагностике и устранению электроэрозии на турбоагрегатах находящихся в эксплуатации. При цитуванні документа, використовуйте посилання http://essuir.sumdu.edu.ua/handle/123456789/21587There considered conditions resulting in occurring electroerozion damage sites in turbine unit, as well as their characteristic features. There given recommendations concerning diagnosis and elimination of electroerozion on turbine units being in operation. При цитировании документа, используйте ссылку http://essuir.sumdu.edu.ua/handle/123456789/2158