1,431 research outputs found
Three-axis electron-beam test facility
An electron beam test facility, which consists of a precision multidimensional manipulator built into an ultra-high-vacuum bell jar, was designed, fabricated, and operated at Lewis Research Center. The position within the bell jar of a Faraday cup which samples current in the electron beam under test, is controlled by the manipulator. Three orthogonal axes of motion are controlled by stepping motors driven by digital indexers, and the positions are displayed on electronic totalizers. In the transverse directions, the limits of travel are approximately + or - 2.5 cm from the center with a precision of 2.54 micron (0.0001 in.); in the axial direction, approximately 15.0 cm of travel are permitted with an accuracy of 12.7 micron (0.0005 in.). In addition, two manually operated motions are provided, the pitch and yaw of the Faraday cup with respect to the electron beam can be adjusted to within a few degrees. The current is sensed by pulse transformers and the data are processed by a dual channel box car averager with a digital output. The beam tester can be operated manually or it can be programmed for automated operation. In the automated mode, the beam tester is controlled by a microcomputer (installed at the test site) which communicates with a minicomputer at the central computing facility. The data are recorded and later processed by computer to obtain the desired graphical presentations
Reports of injury risks and reasons for choice of sleep environments for infants and toddlers
OBJECTIVE: Compare mothers\u27 reports of injuries for infants and toddlers sleeping with crib-bumpers/mesh-liners/no-barriers and reasons for these sleep environment choices.
METHODS: A cross-sectional survey of mothers subscribing to a parenting magazine and using crib bumpers (n = 224), mesh liners (n = 262), and no barriers (n = 842). Analyses of four possible injuries (face-covered, climb-out/fall, slat-entrapment, hit-head) including multivariate logistic regression adjusted for missing data/demographics and Chi squared analyses of reasons for mothers\u27 choices.
RESULTS: Maternal reports of finding infants/toddlers with face covered had 3.5 times higher adjusted odds (aOR) for crib bumper versus mesh liner use. Breathing difficulties and wedgings were reported for infants/toddlers using crib bumpers but not mesh liners. Climb-outs/falls showed no significant difference in aORs for crib bumpers versus no-barriers and mesh liners versus no barriers. Reports of slat-entrapment were less likely for mothers using crib bumpers and mesh liners than using no barrier (aOR = .28 and .32). Reports of hit-heads were less likely for crib bumpers vs no barrier (aOR = .38) with no significant difference between mesh liners versus no barrier use. Mothers using crib bumpers and mesh liners felt their choice prevented slat-entrapment (89%, 91%); 93.5% of crib bumper users felt their choice prevented hit-heads. Significantly more mesh liner than crib bumper users chose them because There is no suffocation risk (64.1% vs. 40.6%), while 83.6% of no-barrier users chose them because I was concerned about suffocation risk.
CONCLUSIONS FOR PRACTICE: Mothers appeared to be more concerned about preventing minor risks than suffocation. Understanding reasons for mothers\u27 use of barriers/no-barriers is important in tailoring counseling for mothers with infants/toddlers
Wilber T Dayton ARC1985 -001 - Finding Aid
https://place.asburyseminary.edu/findingaids/1013/thumbnail.jp
A Method of Preparing Studies of Trichinella spiralis Owen
This work was first attempted with the idea in mind of securing an adequate supply of laboratory material of Trichinella spiralis for classes in invertebrate Zoology at the State University of Iowa
Location Determinants of Food Manufacturing Investment: Are Non-metropolitan Counties Competitive?
Food manufacturing site selection is determined by infrastructure, agglomeration, product and input markets, labor markets, and fiscal attributes of local communities. This article examines how these factors influence location decisions across the rural-urban continuum in the lower forty-eight states of the U.S. Negative binomial regression and spatial clustering methods are used to forecast new food processor location patterns at the county level, 2000-2004. Remote rural areas are at a comparative disadvantage with respect to attracting food processors, but non-metropolitan counties with economic links to urban core areas may be attractive investment sites for footloose, supply, and demand-oriented food manufacturers.firm location, food manufacturing, negative binomial regression, spatial clustering, Community/Rural/Urban Development, R1, R3,
- …