23,710 research outputs found
Effects of low energy proton, electron, and simultaneously combined proton and electron environments in silicon and GaAs solar cells
Degradation of silicon and GaAs solar cells due to exposures to low energy proton and electron environments and annealing data for these cells are discussed. Degradation of silicon cells in simultaneously combined electron and low energy proton environments and previous experimental work is summarized and evaluated. The deficiencies in current solar array damage prediction techniques indicated by these data and the relevance of these deficiencies to specific missions such as intermediate altitude orbits and orbital transfer vehicles using solar electric propulsion systems are considered
Radioisotope thermal photovoltaic application of the GaSb solar cell
An examination of a RTVP (radioisotopic thermophotovoltaic) conceptual design has shown a high potential for power densities well above those achievable with radioisotopic thermoelectric generator (RTG) systems. An efficiency of 14.4 percent and system specific power of 9.25 watts/kg were predicted for a system with sixteen GPHS (general purpose heat source) sources operating at 1100 C. The models also showed a 500 watt system power by the strontium-90 isotope at 1200 C at an efficiency of 17.0 percent and a system specific power of 11.8 watts/kg. The key to this level of performance is a high-quality photovoltaic cell with narrow bandgap and a reflective rear contact. Recent work at Boeing on GaSb cells and transparent back GaAs cells indicate that such a cell is well within reach
Summary of Voyager Design and Flight Loads
Estimates of flight loads for Voyager 1 and Voyager 2 are summarized and compared to the Voyager design loads obtained from the shock spectra/impedance method and to the loads obtained using space vehicle transient loads analysis. These estimates were obtained by using the measured flight accelerations at the launch vehicle/spacecraft interface as forcing functions for the Voyager mathematical model. Based on these data, an assessment of the shock spectra/impedance loads method used for Voyager is presented. The following conclusions were reached: (1) the shock spectra approach provided reasonable conservative design loads for Voyager, (2) care has to be executed to insure that all critical events are accounted for in constructing shock spectra envelopes, (3) the selection of critical events is not always obvious, especially for those flight events wherein the spacecraft dynamic characteristics are important, and (4) the success of the method is strongly dependent on the analysts' experience and judgement
Permutative categories, multicategories, and algebraic K-theory
We show that the -theory construction of arXiv:math/0403403, which
preserves multiplicative structure, extends to a symmetric monoidal closed
bicomplete source category, with the multiplicative structure still preserved.
The source category of arXiv:math/0403403, whose objects are permutative
categories, maps fully and faithfully to the new source category, whose objects
are (based) multicategories
Detoxification in rehabilitation in England: effective continuity of care or unhappy bedfellows?
There is evidence that residential detoxification alone does not provide satisfactory treatment outcomes and that outcomes are significantly enhanced when clients completing residential detoxification attend rehabilitation services (Gossop, Marsden, Stewart, & Rolfe, 1999; Ghodse, Reynolds, Baldacchino, et al., 2002). One way of increasing the likelihood of this continuity of treatment is by providing detoxification and rehabilitation within the same treatment facility to prevent drop-out, while the client awaits a rehabilitation bed or in the transition process. However, there is little research evidence available on the facilities that offer both medical detoxification and residential rehabilitation. The current study compares self-reported treatment provision in 87 residential rehabilitation services in England, 34 of whom (39.1%) reported that they offered detoxification services within their treatment programmes. Although there were no differences in self-reported treatment philosophies, residential rehabilitation services that offered detoxification were typically of shorter duration overall, had significantly more beds and reported offering more group work than residential rehabilitation services that did not offer detoxification. Outcomes were also different, with twice as many clients discharged on disciplinary grounds from residential rehabilitation services without detoxification facilities. The paper questions the UK classification of residential drug treatment services as either detoxification or rehabilitation and suggests the need for greater research focus on the aims, processes and outcomes of this group of treatment providers
A fiber-optic current sensor for aerospace applications
A robust, accurate, broad-band, alternating current sensor using fiber optics is being developed for space applications at power frequencies as high as 20 kHz. It can also be used in low and high voltage 60 Hz terrestrial power systems and in 400 Hz aircraft systems. It is intrinsically electromagnetic interference (EMI) immune and has the added benefit of excellent isolation. The sensor uses the Faraday effect in optical fiber and standard polarimetric measurements to sense electrical current. The primary component of the sensor is a specially treated coil of single-mode optical fiber, through which the current carrying conductor passes. Improved precision is accomplished by temperature compensation by means of signals from a novel fiber-optic temperature sensor embedded in the sensing head. The technology contained in the sensor is examined and the results of precision tests conducted at various temperatures within the wide operating range are given. The results of early EMI tests are also given
Fiber-optic sensors for aerospace electrical measurements: An update
Fiber-optic sensors are being developed for electrical current, voltage, and power measurements in aerospace applications. These sensors are presently designed to cover ac frequencies from 60 Hz to 20 kHz. The current sensor, based on the Faraday effect in optical fiber, is in advanced development after some initial testing. Concentration is on packaging methods and ways to maintain consistent sensitivity with changes in temperature. The voltage sensor, utilizing the Pockels effect in a crystal, has excelled in temperature tests. This paper reports on the development of these sensors, the results of evaluation, improvements now in progress, and the future direction of the work
Benchmark ultra-cool dwarfs in widely separated binary systems
Ultra-cool dwarfs as wide companions to subgiants, giants, white dwarfs and
main sequence stars can be very good benchmark objects, for which we can infer
physical properties with minimal reference to theoretical models, through
association with the primary stars. We have searched for benchmark ultra-cool
dwarfs in widely separated binary systems using SDSS, UKIDSS, and 2MASS. We
then estimate spectral types using SDSS spectroscopy and multi-band colors,
place constraints on distance, and perform proper motions calculations for all
candidates which have sufficient epoch baseline coverage. Analysis of the
proper motion and distance constraints show that eight of our ultra-cool dwarfs
are members of widely separated binary systems. Another L3.5 dwarf, SDSS 0832,
is shown to be a companion to the bright K3 giant Eta Cancri. Such primaries
can provide age and metallicity constraints for any companion objects, yielding
excellent benchmark objects. This is the first wide ultra-cool dwarf + giant
binary system identified.Comment: 4 pages, 3 figures, conference, "New Technologies for Probing the
Diversity of Brown Dwarfs and Exoplanets", oral tal
- …