17,211 research outputs found
An experimental investigation of the condensation of silicate grains
Amorphous magnesium silicate smoke particles were condensed from hydrogen and argon atmospheres containing Mg and Si0. A wide range of initial compositions were observed but all particles could be recrystallized into forsterite (Mg2Si04), by heating to 1000 C in vacuum. The amount of smoke formed decreased rapidly with temperatures between 300 and 800 K at reactant partial pressures of about 1 torr
AN IRRIGATION MODEL FOR MANAGEMENT OF LIMITED WATER SUPPLIES
A two-stage simulation/mathematical programming model is presented for determining the optimal intraseasonal allocation of irrigation water under conditions of limited water supply. The model is applied to a series of water shortage scenarios under both surface and center pivot irrigation. Economically efficient irrigation management is shown to involve the coordination of a number of managerial decisions, including irrigation scheduling, crop substitution, the adoption of improved irrigation labor practices, and idling land. The results indicate that significant opportunities exist for conserving water in the study area under both surface and center pivot irrigation.Crop Production/Industries, Resource /Energy Economics and Policy,
Measurement of the SOC State Specific Heat in ^4He
When a heat flux Q is applied downward through a sample of liquid 4He near the lambda transition, the helium self organizes such that the gradient in temperature matches the gravity induced gradient in Tlambda. All the helium in the sample is then at the same reduced temperature tSOC = ((T[sub SOC] - T[sub lambda])/T[sub lambda]) and the helium is said to be in the Self-Organized Critical (SOC) state. We have made preliminary measurements of the 4He SOC state specific heat, C[del]T(T(Q)). Despite having a cell height of 2.54 cm, our results show no difference between C[del]T and the zero-gravity 4He specific heat results of the Lambda Point Experiment (LPE) [J.A. Lipa et al., Phys. Rev. B, 68, 174518 (2003)] over the range 250 to 450 nK below the transition. There is no gravity rounding because the entire sample is at the same reduced temperature tSOC(Q). Closer to Tlambda the SOC specific heat falls slightly below LPE, reaching a maximum at approximately 50 nK below Tlambda, in agreement with theoretical predictions [R. Haussmann, Phys. Rev. B, 60, 12349 (1999)]
Influence of voluntary standards and design modifications on trampoline injury in Victoria, Australia
© 2015 BMJ Publishing Group. All rights reserved. Purpose To examine the influence of the voluntary Australian trampoline standard (AS 4989-2006) and market-driven design modifications on relevant trampoline injuries. Methods Trend and intervention analysis on frequencies and proportions of hospital-treated trampoline-related injury in Victoria, Australia, extracted from the Victorian Emergency Minimum Dataset from 1 July 1999 to 30 June 2013. The injuries relevant to the AS were contact with spring and frame, and multipleuser injury. Falls from trampolines were relevant for netted trampolines, a market-driven modification. Results Frequency of all trampoline injuries increased by 11.4% (95% CI 10.0% to 11.7%) on average each year. Spring and frame, and fall injuries increased to a lesser extent (8.7%, 95% CI 6.9% to 9.8% and 7.3%, 95% CI 5.8% to 8.3%, respectively). Multiple-user injuries increased by 21.0% (95% CI 16.3% to 21.9%). As a proportion of all trampoline injuries, spring and frame injury and falls injury decreased, while multipleuser injuries increased. The intervention analysis showed no significant change in spring and frame injuries associated with the AS (p=0.17). A significant increase was found for multiple-user injuries (p=0.01), in particular for the 0-year to 4-year age group (p<0.0001), post 2007. Conclusions There was little evidence for an effect of the voluntary standard on spring and frame injury and none for multiple-user injury. Netted trampolines appear to be associated with a decrease in falls from trampolines but an increase in injuries to multiple users. A mandated trampoline safety standard and a safety campaign including warnings about multiple users is recommended. Continued monitoring of injury data will be required
A framework for understanding the factors influencing pair programming success
Pair programming is one of the more controversial aspects of several Agile system development methods, in particular eXtreme Programming (XP). Various studies have assessed factors that either drive the success or suggest advantages (and disadvantages) of pair programming.
In this exploratory study the literature on pair programming is examined and factors distilled. These factors are then compared and contrasted with those discovered in our recent Delphi study of pair programming.
Gallis et al. (2003) have proposed an initial framework aimed at providing a comprehensive identification of the major factors impacting team programming situations including pair programming. However, this
study demonstrates that the framework should be extended to include an additional category of factors that relate to organizational matters. These factors will be further refined, and used to develop and empirically evaluate a conceptual model of pair programming (success)
Control System for the LEDA 6.7-MeV Proton Beam Halo Experiment
Measurement of high-power proton beam-halo formation is the ongoing
scientific experiment for the Low Energy Demonstration Accelerator (LEDA)
facility. To attain this measurement goal, a 52-magnet beam line containing
several types of beam diagnostic instrumentation is being installed. The
Experimental Physics and Industrial Control System (EPICS) and commercial
software applications are presently being integrated to provide a real-time,
synchronous data acquisition and control system. This system is comprised of
magnet control, vacuum control, motor control, data acquisition, and data
analysis. Unique requirements led to the development and integration of
customized software and hardware. EPICS real-time databases, Interactive Data
Language (IDL) programs, LabVIEW Virtual Instruments (VI), and State Notation
Language (SNL) sequences are hosted on VXI, PC, and UNIX-based platforms which
interact using the EPICS Channel Access (CA) communication protocol.
Acquisition and control hardware technology ranges from DSP-based diagnostic
instrumentation to the PLC-controlled vacuum system. This paper describes the
control system hardware and software design, and implementation.Comment: LINAC2000 Conference, 4 pg
CTMC calculations of electron capture and ionization in collisions of multiply charged ions with elliptical Rydberg atoms
We have performed classical trajectory Monte Carlo (CTMC) studies of electron
capture and ionization in multiply charged (Q=8) ion-Rydberg atom collisions at
intermediate impact velocities. Impact parallel to the minor and to the major
axis, respectively, of the initial Kepler electron ellipse has been
investigated. The important role of the initial electron momentum distribution
found for singly charged ion impact is strongly disminished for higher
projectile charge, while the initial spatial distribution remains important for
all values of Q studied.Comment: 3 pages, 5 figure
- âŠ