Flow visualization study of a two-dimensional representation of the Space Shuttle launch pad configuration

The loss of the Space Shuttle Challenger was caused by the failure of the aft joint O-ring seals in its right solid rocket booster. It has been suggested by several sources that wind conditions through a reduction in temperature of the right solid rocket booster caused by the wind blowing across the cold external tank, played a role in the O-ring failure. To check the plausibility of the wind theory, an experiment was carried out in a water towing tank to visualize the flow past a two-dimensional model representing a cross section of the Space Shuttle launch configuration. The periodic formation of vortices was found to characterize the wake generated by the model. It is suggested that this organized motion in the flow is the dominant mechanism that accomplishes heat transfer from the external tank to the right solid rocket booster. Flow visualization results consisting of photographs that show instantaneous streamline patterns of the flow are presented

Experimental unsteady aerodynamics of conventional and supercritical airfoils

Experimental data on the unsteady aerodynamics of oscillating airfoils in transonic flow are presented. Two 0.5 m-chord airfoil models - an NACA 64A010 and an NLR 7301 - were tested in the NASA-Ames 11 by 11 foot Transonic Wind Tunnel at Mach numbers to 0.85, at chord Reynolds numbers to 12 million and at mean angles of attack to 4 deg. The airfoils were subjected to both pitching and plunging motions at reduced frequencies to 0.3 (physical frequencies to 53 Hz). The new hardware and the extensive use of computer-experiment integration developed for this test are described. The geometrical configuration of the model and the test arrangement are described in detail. Mean and first harmonic data are presented in both tabular and graphical form to aid in comparisons with other data and with numerical computations

Options for demonstrating the use of solar energy in california buildings

Three programmatic options for demonstrating the most economically attractive applications of solar energy to buildings located in California are formulated. The unique characteristics of solar energy demonstration programs and the involvement of key decision makers are discussed in detail. The demonstration programs are related to specific purposes. The priority structure used to select the generic projects making up each program is discussed in relationship to the purposes of the program. In addition, some implications of the nature of the demonstration program for management are outlined

Thermocapillary flows and their stability: Effects of surface layers and combination

The theoretical analysis of the fluid mechanics and heat transfer of motions driven by surface tension gradients (Marangoni convection) was researched. Convection accompanying the process of growing high quality single crystals from the melt in a micro-g environment was examined. The geometries considered include two dimensional liquid filled slots and axisymmetric float-zone configurations

Thermocapillary flows and their stability: Effects of surface layers and contamination

The fluid mechanics and heat transfer of motions driven by surface tension gradients (Marangoni convection) were analyzed theoretically to obtain an understanding of the convection accompanying the process of growing high quality single crystals from the melt in a mu-g environment. The geometries considered include two dimensional liquid filled slots and axisymmetric float zone configurations

Surface-tension induced instabilities: Effects of lateral boundaries

Convection in circular and rectangular cylinders is analyzed. The governing equations and boundary conditions are formulated, linear and nonlinear stability theory are considered, and the physical implications of the theory are discussed

Rocketdyne's advanced coal slurry pumping program

The Rocketdyne Division of Rockwell International Corporation is conducting a program for the engineering, fabrication, and testing of an experimental/prototype high-capacity, high-pressure centrifugal slurry feed pump for coal liquefaction purposes. The abrasion problems in a centrifugal slurry pump are primarily due to the manner in which the hard, solid particles contained in the slurry are transported through the hydraulic flow passages within the pump. The abrasive particles can create scraping, grinding, cutting, and sandblasting effects on the various exposed parts of the pump. These critical areas involving abrasion and impact erosion wear problems in a centrifugal pump are being addressed by Rocketdyne. The mechanisms of abrasion and erosion are being studied through hydrodynamic analysis, materials evaluation, and advanced design concepts

Effects of heat input rates on T-1 and T-1A steel welds

Technology of T-1 and T-1A steels is emphasized in investigation of their weld-fabrication. Welding heat input rate, production weldment circumstances, and standards of welding control are considered

ASCA observations of massive medium-distant clusters of galaxies. II

We have selected seven medium-distant clusters of galaxies (z ~ 0.1 - 0.3) for multi-wavelength observations with the goal of investigating their dynamical state. Following Paper I (Pierre et al. 1999) which reported the ASCA results about two of them, we present here the analysis of the ASCA observations of the other five clusters; RXJ1023.8-2715 (A3444), RXJ1031.6-2607, RXJ1050.5-0236 (A1111), RXJ1203.2-2131(A1451), and RXJ1314.5-2517. Except for RXJ1031.6, whose X-ray emission turned out to be dominated by an AGN, the ASCA spectra are well fitted by a one-temperature thin thermal plasma model. We compare the temperature-luminosity relation of our clusters with that of nearby ones (z<0.1). Two clusters, RXJ1050.5 and RXJ1023.8, show larger luminosities than the bulk of clusters at similar temperatures, which suggests the presence of a cooling flow. The temperature vs. iron-abundance relationship of our sample is consistent with that of nearby clusters.Comment: 9 pages, 20 figures, A&AS in pres