7,998 research outputs found
Device for quickly sensing the amount of O2 in a combustion product gas
A sensing device comprising an O2 sensor, a pump, a compressor, and a heater is provided to quickly sense the amount of O2 in a combustion product gas. A sample of the combustion product gas is compressed to a pressure slightly above one atmosphere by the compressor. Next, the heater heats the sample between 800 C and 900 C. Next, the pump causes the sample to be flushed against the electrode located in O2 sensor 6000 to 10,000 times per second. Reference air at approximately one atmosphere is provided to the electrode of O2 sensor. Accordingly, the O2 sensor produces a voltage which is proportional to the amount of oxygen in the combustion product gas. This voltage may be used to control the amount of O2 entering into the combustion chamber which produces the combustion product gas
Solid state crystal physics at very low temperatures
The properties of nearly perfect crystals was studied at cryogenic temperatures. A large Helium 3 and Helium 4 dilution refrigerator has been assembled, and is described. A cryostat suitable for cooling a 35 liter volume to .020 Kelvin was designed and constructed, together with instrumentation to observe the properties of nearly perfect crystals
Properties of large nearly perfect crystals at very low temperatures
A liquid helium cryostat of a size and construction unavailable commercially, was built for use in measuring the Q of several materials at milli-Kelvin temperatures. The design and testing of the cryostat is described as well as the design of the experiment vacuum chamber and adaptor for the dilution refrigerator insert. Theory, design, and testing are also discussed for the magnetic coils built to levitate the materials so as to isolate them and increase the measured Q. A four point suspension with capacitor end plates as the transducer was used to obtain preliminary Q measurements of 6061 aluminum alloy and single crystal silicon. Results are tabulated
The Effects of Rlux Leakage Magnetizer Velocity on Volumetric Defect Signals
The inspection requirements of the hundreds of thousands of miles of pipeline worldwide necessitates the use of high inspection velocities. Unfortunately, high inspection velocities can compromise the ability to detect and characterize defects [1,2]. These velocity effects need to be quantified in order to have a complete understanding of MFL inspection capabilities. This paper presents an explanation and a summary of these effects based on two and three dimensional finite element analysis and experimental results. Selected finite element and experimental results are also shown. The specific problem addressed is large diameter (\u3e12 inches), ferromagnetic steel pipe material and inspection velocities up to 10 miles per hour. The defects are volumetric metal loss generally caused by corrosion
The Outer Limits of Galaxy Clusters: Observations to the Virial Radius with Suzaku, XMM, and Chandra
The outskirts of galaxy clusters, near the virial radius, remain relatively
unexplored territory and yet are vital to our understanding of cluster growth,
structure, and mass. In this presentation, we show the first results from a
program to constrain the state of the outer intracluster medium (ICM) in a
large sample of galaxy clusters, exploiting the strengths of three
complementary X-ray observatories: Suzaku (low, stable background), XMM-Newton
(high sensitivity), and Chandra (good spatial resolution). By carefully
combining observations from the cluster core to beyond r_200, we are able to
identify and reduce systematic uncertainties that would impede our spatial and
spectral analysis using a single telescope. Our sample comprises nine clusters
at z ~ 0.1-0.2 fully covered in azimuth to beyond r_200, and our analysis
indicates that the ICM is not in hydrostatic equilibrium in the cluster
outskirts, where we see clear azimuthal variations in temperature and surface
brightness. In one of the clusters, we are able to measure the diffuse X-ray
emission well beyond r_200, and we find that the entropy profile and the gas
fraction are consistent with expectations from theory and numerical
simulations. These results stand in contrast to recent studies which point to
gas clumping in the outskirts; the extent to which differences of cluster
environment or instrumental effects factor in this difference remains unclear.
From a broader perspective, this project will produce a sizeable fiducial data
set for detailed comparison with high-resolution numerical simulations.Comment: 8 pages, 6 figures. To appear in the proceedings of the Suzaku 2011
Conference, "Exploring the X-ray Universe: Suzaku and Beyond.
Low Frequency Eddy Currents with magnetic Saturation for In-Line Detection and Sizing of Stress Corrosion Cracks
Under previous programs for the Pipeline Research Committee, Battelle has developed and field tested a low frequency eddy current instrument for characterizing stress corrosion cracks in pipelines. While a significant improvement over conventional magnetic particle inspections, the eddy current method as it was developed in these programs is limited to use for inspections of pipelines from the outside surface. This paper examines the possibility of using this low frequency eddy current equipment to detect and size stress corrosion cracks from the interior of the pipeline by magnetically saturating the pipeline to reduce its permeability and thereby increase penetration of the eddy currents into the pipe
Quality Suckler Beef From Low and High Input Grassland Management Systems
End of Project ReportSpring calving cows were used in the years 1997 to 2003 in the
development of planned low and high input systems of suckler beef
production.The main objective of the study was to compare a semiintensive
Grange (standard): system of suckler beef production with
a more extensive REPS (Rural Environment Protection Scheme) compatible
system. In the standard system the stocking rate was 0.80 ha
per cow unit (cow plus heifer and steer progeny to slaughter at 20
and 23/24 months of age, respectively, plus replacements or its equivalent),
a nitrogenous fertiliser application rate of 210 kg per ha and
two silage harvests each year amounting to the equivalent of 87% of
the total area harvested. The REPS system involved a 25% lower
stocking rate, an annual nitrogen fertiliser application rate of 90 to
100 kg per ha and one silage harvest (portion in late May to provide
good silage for the progeny and the remainder in June to provide
lower quality silage for cows) amounting to 58% of the total area
harvested.
Between 1997 and 2000 the cow herd were Limousin x Friesians
(LF) and Simmental x (Limousin x Friesians) (SLF). A herd of first
calvers were introduced in 2001 and 2002 which in addition to LF
and SLF included Limousin x (Limousin x Friesians), purebred
Limousin and purebred Charolais. Charolais (or Simmental) sires
were used on mature cows. Replacement heifers were bred to calve
at 2 years of age using an easy calving Limousin bull. Concentrate
inputs per animal were the same in the two systems.
The main findings of the study were:
• The mean nitrogenous application rates were 210 and 98 kg
per ha in the standard and REPS systems, respectively.
• Mean dry matter digestibility of the first-cut silages harvested
early (May 19 to May 29), late (June 5 to June 13) and the
second cut silage in the standard system (harvested in
July/early August) were 716, 690 and 674 g/kg, respectively.
• When averaged throughout two grazing seasons there was no difference between the standard and REPS systems in pregrazing
or post-grazing sward heights.
When examined over one grazing season the only major
difference between the grazing areas was that the pasture
crude protein content was higher in the standard system in
both the pre-grazed (205 and 159 g/kg) and post-grazed (172
v 141 g/kg) swards.
Cow liveweight and body condition score gains at pasture
and calf gains from birth to weaning were the same for both
systems.
Carcass weights of the progeny were the same for the standard
and REPS systems
The Effects of Geology, Topography, and Disturbance on the Soils and Vegetation of the Middlesex Fells, Massachusetts
Guidebook for field trips to the Boston area and vicinity : 68th annual meeting, New England Intercollegiate Geological Conference, October 8-10, 1976: Trip B-
- …