6,700 research outputs found
Analysis and design of three dimensional supersonic nozzles. Volume 1: Nozzle-exhaust flow field analysis by a reference plane characteristics technique
A second order numerical method employing reference plane characteristics has been developed for the calculation of geometrically complex three dimensional nozzle-exhaust flow fields, heretofore uncalculable by existing methods. The nozzles may have irregular cross sections with swept throats and may be stacked in modules using the vehicle undersurface for additional expansion. The nozzles may have highly nonuniform entrance conditions, the medium considered being an equilibrium hydrogen-air mixture. The program calculates and carries along the underexpansion shock and contact as discrete discontinuity surfaces, for a nonuniform vehicle external flow
An improved source flow characteristic technique for the analysis of scramjet exhaust flow fields
The process is discussed of designing a nozzle for a hypersonic airbreathing vehicle which involves a complex study of the inter-relationship among many parameters: internal-external expansion, vehicle lift, drag, pitching moments, and structural and weight limitations. The source flow characteristic approach to the design process was extended and improved, and streamline interpolation procedure was incorporated. All characteristic and boundary calculations were made compatible with frozen, equilibrium and ideal gas thermodynamic options, while slip surface calculations (cowl interaction) were extended to underexpanded flow conditions. Since viscous forces can significantly influence vehicle forces, pitching moments and structural/weight considerations, a local integration via flat plate boundary layer skin friction and heat transfer coefficients was included. These effects are calculated using the Spalding and Chi method, and all force and moment calculations are performed via integration of the local forces acting on the specified vehicle wetted areas
An improved numerical procedure for the parametric optimization of three dimensional scramjet nozzles
A parametric numerical procedure permitting the rapid determination of the performance of a class of scramjet nozzle configurations is presented. The geometric complexity of these configurations ruled out attempts to employ conventional nozzle design procedures. The numerical program developed permitted the parametric variation of cowl length, turning angles on the cowl and vehicle undersurface and lateral expansion, and was subject to fixed constraints such as the vehicle length and nozzle exit height. The program required uniform initial conditions at the burner exit station and yielded the location of all predominant wave zones, accounting for lateral expansion effects. In addition, the program yielded the detailed pressure distribution on the cowl, vehicle undersurface and fences, if any, and calculated the nozzle thrust, lift and pitching moments
Efficient Spin Injection into Silicon and the Role of the Schottky Barrier
Implementing spin functionalities in Si, and understanding the fundamental
processes of spin injection and detection, are the main challenges in
spintronics. Here we demonstrate large spin polarizations at room temperature,
34% in n-type and 10% in p-type degenerate Si bands, using a narrow Schottky
and a SiO2 tunnel barrier in a direct tunneling regime. Furthermore, by
increasing the width of the Schottky barrier in non-degenerate p-type Si, we
observed a systematic sign reversal of the Hanle signal in the low bias regime.
This dramatic change in the spin injection and detection processes with
increased Schottky barrier resistance may be due to a decoupling of the spins
in the interface states from the bulk band of Si, yielding a transition from a
direct to a localized state assisted tunneling. Our study provides a deeper
insight into the spin transport phenomenon, which should be considered for
electrical spin injection into any semiconductor
Methodology for Three Dimensional Nozzle Design
Criteria for the selection and methods of analysis for designing a hypersonic scramjet nozzle are discussed. The criteria are based on external and internal flow requirements, related to drag, lift, and pitching moments of the vehicle and thrust of the engine. The steps involved in establishing the criteria are analyzed. Mathematical models of the design procedure are provided
- …