1,288 research outputs found
Stress concentration targeted reinforcement using multi-material based 3D printing
Topological engineering (3D printing into complex geometry) has emerged as a pragmatic approach to develop high specific strength (high strength and low density) lightweight structures. These complex lightweight structures fail at high-stress concentration regions, which can be, replaced with soft/tough material using 3D printing. It can improve mechanical properties such as strength, toughness and energy absorption etc. Here, we have developed stress concentration targeted multi-material schwarzite structures by 3D printing technique. The soft (Thermoplastic Polyurethane) material is reinforced at high-stress concentration regions of hard (Polylactic acid) schwarzite structures to enhance the specific yield strength and resilience. The mechanical properties and responses of these structures were then assessed via uniaxial compression tests. The multi-materials 3D printed composite structure shows improved mechanical properties compared to single materials architecture. The specific resilience of composites demonstrates remarkable enhancements, with percentage increases of 204.70 %, 596.50 %, and 1530.99 % observed when compared to hard primitives, and similarly impressive improvements of 182.45 %, 311.64 %, and 477.75 % observed in comparison to hard gyroids. The obtained experimental findings were comprehensively examined and validated with molecular dynamics (MD) simulations. The promising characteristics of these lightweight multi-material-based Schwarzites structures can be utilized in various fields such as energy harvesting devices, protective, safety gears, and aerospace components
Crossover and scaling in a two-dimensional field-tuned superconductor
Using an analysis similar to that of Imry and Wortis, it is shown that the
apparent first order superconductor to metal transition, which has been claimed
to exist at low values of the magnetic field in a two-dimensional field-tuned
system at zero temperature,can be consistentlyinterpreted as a sharp crossover
from a strong superconductor to an inhomogeneous state, which is a weak
superconductor. The true zero-temperature superconductor to insulator
transition within the inhomogenous state is conjectured to be that of randomly
diluted XY model. An explaination of the observed finite temperature
approximate scaling of resistivity close to the critical point is speculated
within this model.Comment: 5 pages, 2 figures, corrected and modified according to referee
Report
Rolling Tachyon Boundary State, Conserved Charges and Two Dimensional String Theory
The boundary state associated with the rolling tachyon solution on an
unstable D-brane contains a part that decays exponentially in the asymptotic
past and the asymptotic future, but it also contains other parts which either
remain constant or grow exponentially in the past or future. We argue that the
time dependence of the latter parts is completely determined by the requirement
of BRST invariance of the boundary state, and hence they contain information
about certain conserved charges in the system. We also examine this in the
context of the unstable D0-brane in two dimensional string theory where these
conserved charges produce closed string background associated with the discrete
states, and show that these charges are in one to one correspondence with the
symmetry generators in the matrix model description of this theory.Comment: LaTeX file, 37 pages; v3: references added; v4: minor change
Rolling tachyon solution of two-dimensional string theory
We consider a classical (string) field theory of matrix model which was
developed earlier in hep-th/9207011 and subsequent papers. This is a
noncommutative field theory where the noncommutativity parameter is the string
coupling . We construct a classical solution of this field theory and show
that it describes the complete time history of the recently found rolling
tachyon on an unstable D0 brane.Comment: 19 pages, 2 figures, minor changes in text and additional references,
correction of decay time (version to appear in JHEP.
A One-Parameter Family of Hamiltonian Structures for the KP Hierarchy and a Continuous Deformation of the Nonlinear \W_{\rm KP} Algebra
The KP hierarchy is hamiltonian relative to a one-parameter family of Poisson
structures obtained from a generalized Adler map in the space of formal
pseudodifferential symbols with noninteger powers. The resulting \W-algebra
is a one-parameter deformation of \W_{\rm KP} admitting a central extension
for generic values of the parameter, reducing naturally to \W_n for special
values of the parameter, and contracting to the centrally extended
\W_{1+\infty}, \W_\infty and further truncations. In the classical limit,
all algebras in the one-parameter family are equivalent and isomorphic to
\w_{\rm KP}. The reduction induced by setting the spin-one field to zero
yields a one-parameter deformation of \widehat{\W}_\infty which contracts to
a new nonlinear algebra of the \W_\infty-type.Comment: 31 pages, compressed uuencoded .dvi file, BONN-HE-92/20, US-FT-7/92,
KUL-TF-92/20. [version just replaced was truncated by some mailer
On The Problem of Particle Production in c=1 Matrix Model
We reconsider and analyze in detail the problem of particle production in the
time dependent background of matrix model where the Fermi sea drains away
at late time. In addition to the moving mirror method, which has already been
discussed in hep-th/0403169 and hep-th/0403275, we describe yet another method
of computing the Bogolubov coefficients which gives the same result. We
emphasize that these Bogolubov coefficients are approximately correct for small
value of the deformation parameter.
We also study the time evolution of the collective field theory stress-tensor
with a special point-splitting regularization. Our computations go beyond the
approximation of the previous treatments and are valid at large coordinate
distances from the boundary at a finite time and up-to a finite coordinate
distance from the boundary at late time. In this region of validity our
regularization produces a certain singular term that is precisely canceled by
the collective field theory counter term in the present background. The energy
and momentum densities fall off exponentially at large distance from the
boundary to the values corresponding to the static background. This clearly
shows that the radiated energy reaches the asymptotic region signaling the
space-time decay.Comment: 37 pages, 5 figures. Section 6 is modified to clarify main
accomplishments of the paper including a discussion comparing stress-tensor
analysis with those preexisted in literature. Other modifications include
minor changes in the text and addition of one reference. Version accepted for
publication in JHE
Structure and magnetocaloric properties of La1-xKxMnO3 manganites
A technology of obtaining the single-phase ceramic samples of La1-xKxMnO3
manganites and the dependence of their structural parameters on the content of
potassium has been described. Magnetocaloric effect (MCE) in the obtained
samples has been measured by two independent methods: by classical direct
methodic and by a method of magnetic field modulation. The values of MCE
obtained by both methods have been substantially differed. The explanation of
the observed divergences is given. The correlation between the level of doping
and MCE value has been defined. The value of TC determined by the MCE maximum
has been conformed to the literature data received by other methods.Comment: 14 pages, 6 figures, 3 table
Spacetime Energy Decreases under World-sheet RG Flow
We study renormalization group flows in unitary two dimensional sigma models
with asymptotically flat target spaces. Applying an infrared cutoff to the
target space, we use the Zamolodchikov c-theorem to demonstrate that the target
space ADM energy of the UV fixed point is greater than that of the IR fixed
point: spacetime energy decreases under world-sheet RG flow. This result
mirrors the well understood decrease of spacetime Bondi energy in the time
evolution process of tachyon condensation.Comment: 25 pages, 4 figures, harvma
Vortex dynamics and upper critical fields in ultrathin Bi films
Current-voltage (I-V) characteristics of quench condensed, superconducting,
ultrathin films in a magnetic field are reported. These I-V's show
hysteresis for all films, grown both with and without thin underlayers.
Films on Ge underlayers, close to superconductor-insulator transition (SIT),
show a peak in the critical current, indicating a structural transformation of
the vortex solid (VS). These underlayers, used to make the films more
homogeneous, are found to be more effective in pinning the vortices. The upper
critical fields (B) of these films are determined from the resistive
transitions in perpendicular magnetic field. The temperature dependence of the
upper critical field is found to differ significantly from Ginzburg-Landau
theory, after modifications for disorder.Comment: Phys Rev B, to be published Figure 6 replaced with correct figur
Classical A_n--W-Geometry
This is a detailed development for the case, of our previous article
entitled "W-Geometries" to be published in Phys. Lett. It is shown that the
--W-geometry corresponds to chiral surfaces in . This is comes out
by discussing 1) the extrinsic geometries of chiral surfaces (Frenet-Serret and
Gauss-Codazzi equations) 2) the KP coordinates (W-parametrizations) of the
target-manifold, and their fermionic (tau-function) description, 3) the
intrinsic geometries of the associated chiral surfaces in the Grassmannians,
and the associated higher instanton- numbers of W-surfaces. For regular points,
the Frenet-Serret equations for --W-surfaces are shown to give the
geometrical meaning of the -Toda Lax pair, and of the conformally-reduced
WZNW models, and Drinfeld-Sokolov equations. KP coordinates are used to show
that W-transformations may be extended as particular diffeomorphisms of the
target-space. This leads to higher-dimensional generalizations of the WZNW and
DS equations. These are related with the Zakharov- Shabat equations. For
singular points, global Pl\"ucker formulae are derived by combining the
-Toda equations with the Gauss-Bonnet theorem written for each of the
associated surfaces.Comment: (60 pages
- …