On the Impact of Wireless Jamming on the Distributed Secondary Microgrid Control

The secondary control in direct current microgrids (MGs) is used to restore the voltage deviations caused by the primary droop control, where the latter is implemented locally in each distributed generator and reacts to load variations. Numerous recent works propose to implement the secondary control in a distributed fashion, relying on a communication system to achieve consensus among MG units. This paper shows that, if the system is not designed to cope with adversary communication impairments, then a malicious attacker can apply a simple jamming of a few units of the MG and thus compromise the secondary MG control. Compared to other denial-of-service attacks that are oriented against the tertiary control, such as economic dispatch, the attack on the secondary control presented here can be more severe, as it disrupts the basic functionality of the MG

A numerical micro-mechanical study of the influence of fiber–matrix interphase failure on carbon/epoxy material properties

A finite element micromechanical study of unidirectional carbon–epoxy system is performed in order to investigate the role of fiber–matrix debonding in the degradation of mechanical properties and in the onset of failure for this class of composite materials. The presence of interphase flaws, that can be induced during the manufacturing processes, into micro-scale FE models is obtained by means of an original damage injection technique developed by the authors. The fibers are considered as transversally isotropic solids and the matrix is modeled as an isotropic, elasto-plastic, material with damage. The effect of fiber–matrix debonding is analyzed by means of a quasi 3-D unitary cell with a single fiber, with periodic boundary conditions, for different loading cases. Subsequently, multi-fiber representative volume elements are investigated with the same boundary and loading conditions. Finally, the effect of a 3-D debonding propagation is studied via single fiber model with an increased fiber-wise depth

CFD simulation of multiple dust explosion occurred in a flour mill

Dust explosions pose a serious hazard to both personnel and equipment in industries that handles combustible powders. Although prevention and mitigation technology of dust explosions has progressed greatly, continual accidents in the process industries demonstrate the need for improved knowledge in this area (Mercan, 2016; Russo et al., 2017). On July 16, 2007, a primary explosion followed by secondary explosions happened in the Cordero mill (Italy) and 5 persons died (Marmo et al., 2012). The accident occurred at the end of the loading operation of a tanker, when a surplus of flour was overcharged. This extra amount was then pneumatically conveyed to a silo placed in the flour-warehouses, by connecting the tanker to the pneumatic transport line through one of the tanker hoses. The flour was loaded at a low flow rate, and hence a low concentration of flour in the duct occurred. The source of ignition of the dust cloud was attributed to an electrostatic arc that took place in the pneumatic transport duct (Marmo et al., 2012). The technical enquire found signs of the explosion in the duct: internal pressure provoked evident deformation of the duct. As widely discussed in the literature (Fiorentini and Marmo 2019; Marmo et al., 2013), Computational Fluid Dynamics can be a valid aid to forensic engineering because it allows to discern the incidental sequence that is more adherent to the evidence. The aim of this work is to reproduce the conditions present in the mill at the time of the accident using the CFD-code DESC, which is being developed for simulating dust explosions in complex geometries. The results obtained from the simulations were compared to the damage observed after the accident in order to identify the more credible scenario. Simulations with different levels of flour in the silo, concentration of dust in the air mixture and position of ignition were performed. Analysis of results revealed the effect of different parameters on the severity of dust explosion, not only limited to the case study investigated, in order to adopt the appropriate prevention and protection measures

Investigation of the fluid dynamic of the modified Hartmann tube equipment by high-speed video processing

Hartmann tube equipment is used in the dust explosion experimental test to screen the flammability of powdered materials (according to ISO 80079-20) and to determine the Minimum ignition energy of dust (UNI EN 13824:2004). For the test, the nominal concentration, as the ratio between the dust sample mass and the chamber test volume (1.2 liters), is considered, assuming a uniform concentration distribution. Even though adopted as standard procedure, this approach does not consider the dust cloud's non-stationary conditions inside the tube: The effect of turbulence decrease and dust sedimentation during the test duration will affect the dust concentration locally and globally within the test enclosure. Moreover, it is well known that the turbulence intensity influences Minimum Ignition Energy. This work derives from previous investigation on describing the dust cloud behavior within dust explosibility laboratory apparatuses. High-speed video recordings have recently been adopted to support the dust cloud dynamic analysis and visualize the cloud dispersion within a standard test setup, as the 20 L sphere and the modified Hartmann tube. This work intends to use different high-speed videos of dust dispersions in the modified Hartmann tube, with different injection pressure and sample mass, to focus on the behavior of the cloud at the typical delay time of the MIE measurement, i.e., 60-180 ms. Each video is processed frame by frame to reveal information on the cloud dynamics, otherwise hidden. The dust dynamic is accounted for calculating the variation in time of the brightness of pixels. This way, it is possible to obtain a set of data that incorporate the effects of the dust cloud distribution and the velocity of the particles clusters. The experimental data processing will help to focus on the time-scale and the length scale of the turbulence. The next study will focus on evaluating the time and space scale of the dust cloud and identifying the effect of ignition time delay on the MIE measurement to provide indications to operate at the most conservative conditions (higher concentration) and to avoid issues and under/overestimates due to agglomeration, sedimentation or segregation of dust particles

3D change detection analysis of a coastal landslide performed by multi-temporal point clouds comparison

The structure from motion (SfM) photogrammetric technique (FONSTAD et al., 2013) has become a suitable method to obtain high resolution topography data in a wide range of geomorphic environments (PASSALACQUA et al., 2015). SfM is designed to reconstruct the three-dimensional geometry of buildings and objects from randomly acquired images, and represents a low cost option respect to traditional photogrammetric and lidar techniques (FONSTAD et al., 2013). In this way, also the 3D geometry of complex natural surfaces can be achieved with a horizontal and vertical accuracy which depend on the choice of sensor for images acquisition, platform (e.g., UAV, boat, vehicle), and method of assignment of geodetic coordinates to the digital data. In advanced geomorphic applications, repeated photogrammetric surveys at different times allow to detect topographic changes in order to map or monitor erosion, deposition and develop sediment budgets. In this work we present a 3D change detection analysis related to a coastal landslide occurred on 27th October 2013 along the coastal sector of the Campi Flegrei volcanic district, Southern Italy (ESPOSITO et al., 2015). A total of four photogrammetric surveys have been carried out in about two years (Fig. 1), by using a UAV platform for one survey and boats for the other three. In order to accurately define the exterior orientation of images, a topographic survey was also carried out, measuring a series of natural and artificial ground control points external to the landslide area with a long-range Total Station. Images were processed using Agisoft PhotoScan® (http://www.agisoft.com), and 3D point clouds were compared through the "Multiscale Model to Model Cloud Comparison (M3C2)" plugin (LAGUE et al., 2013) included in CloudCompare open source software (http://www.danielgm.net/cc/). The plugin allowed us to estimate orthogonal distances between multitemporal point clouds as well as uncertainty related to each distance measurement. SfM processing of each survey resulted in dense point clouds and high-resolution orthophotos. An average coregistration error between clouds was estimated as 11 cm. As output of the M3C2 distance computation we obtained three new clouds in which each point was characterized by distance and uncertainty attributes (Fig. 2). Points corresponding to statistically significant changes were exported and interpolated in ESRI ArcGis® for volume calculation. Volumetric data show that the landslide deposit at cliff toe was progressively eroded by the sea, while landslide scar was affected by a moderate erosion in the first three months after the 2013 landslide event, as well as by a deep erosion between the second and third surveys. Nevertheless, a negligible eroded volume between 2015 and 2016 surveys was estimated in this area. Deposited sediments decreased through time in the whole landslide area so that, generally, a geomorphic evolution moving towards an equilibrium condition seems to be taking place. The study here described highlights a high potentiality of the SfM and cloud-to-cloud distance computation techniques in geomorphology, both for accurate qualitative and quantitative analysis and for hazard and risk assessment. The studied landslide threats indeed a series of residential buildings located close to the retreating cliff edge

Migration of surgical clips through a right lobectomy stump mimicking an asthmatic syndrome

The mechanical stapler is routinely used in thoracic surgery practice to attend resection of bronchus and vessels. Herein, we reported a very rare complication as the migration of a titanium surgical clip through a right lobectomy stump. One year after the procedure, the patient complained of persistent cough. A misdiagnosis of asthma was made and she treated for 6 months with bronchodilators, corticosteroid and antihistaminic without success. Thus, patient re-referred of our unit. No clinical signs of infection as fewer, productive cough, dyspnea were present. The laboratory exams were within normal value including white cells. CT scan revealed no abnormalities. Bronchoscopy demonstrated a healed upper bronchus stump without evidence of an actual, open bronchopleural fistula but with clips apparently working their way into the airway, with approximately half of the clip visible within the lumen. The side of the clips that would be open before closure by the surgeon formed the leading edge of the clips visible in the lumen. The clips were successfully removed during flexible bronchoscopy with a forceps usually used for biopsy. After the procedure, the cough disappeared. The endoscopy check after 3 months showed a normal bronchial stump without evidence of fistula

Optimized testing strategy for the diagnosis of GAA-FGF14 ataxia/spinocerebellar ataxia 27B

Dominantly inherited GAA repeat expansions in FGF14 are a common cause of spinocerebellar ataxia (GAA-FGF14 ataxia; spinocerebellar ataxia 27B). Molecular confirmation of FGF14 GAA repeat expansions has thus far mostly relied on long-read sequencing, a technology that is not yet widely available in clinical laboratories. We developed and validated a strategy to detect FGF14 GAA repeat expansions using long-range PCR, bidirectional repeat-primed PCRs, and Sanger sequencing. We compared this strategy to targeted nanopore sequencing in a cohort of 22 French Canadian patients and next validated it in a cohort of 53 French index patients with unsolved ataxia. Method comparison showed that capillary electrophoresis of long-range PCR amplification products significantly underestimated expansion sizes compared to nanopore sequencing (slope, 0.87 [95% CI, 0.81 to 0.93]; intercept, 14.58 [95% CI, − 2.48 to 31.12]) and gel electrophoresis (slope, 0.84 [95% CI, 0.78 to 0.97]; intercept, 21.34 [95% CI, − 27.66 to 40.22]). The latter techniques yielded similar size estimates. Following calibration with internal controls, expansion size estimates were similar between capillary electrophoresis and nanopore sequencing (slope: 0.98 [95% CI, 0.92 to 1.04]; intercept: 10.62 [95% CI, − 7.49 to 27.71]), and gel electrophoresis (slope: 0.94 [95% CI, 0.88 to 1.09]; intercept: 18.81 [95% CI, − 41.93 to 39.15]). Diagnosis was accurately confirmed for all 22 French Canadian patients using this strategy. We also identified 9 French patients (9/53; 17%) and 2 of their relatives who carried an FGF14 (GAA)≥250 expansion. This novel strategy reliably detected and sized FGF14 GAA expansions, and compared favorably to long-read sequencing