Pathogens Contamination Level Reduction on Beef Using Organic Acids Decontamination Methods

In this study we aimed to assess the efficiency of organic acids in different concentrations regarding pathogens as Salmonella, Listeria and Escherichia on beef, which can cause food borne illness in humans. The samples were sterilized using UV radiation for 30 minutes, afterwards being contaminated with 1 ml of microbial suspension (0.5 MacFarland). We used reference bacterial strains for Salmonella Enteritidis, Escherichia coli and Listeria monocytogenes. The samples were subjected to decontamination procedure by introducing 25mL of solution of lactic, acetic or citric acid in concentration of 1%, 2% and 3%. The results showed a reduction of initial pathogen load, ranging from 0.32 to 7.78 log CFU/g, depending on the type of acid, concentration and pathogen sensitivity. After decontamination, standardized methods have been used for the isolation of pathogenic germs. Based on statistical analysis we conclude that pathogens have a different sensitivity to the action of acid solutions, their sensitivity in ascending order being: Listeria monocytogenes, Salmonella Enteritidis and Escherichia coli. Among the organic acids, the most efficient was lactic acid, followed by acetic acid and less efficient citric acid. The greatest reduction of germs was determined by the concentration of 3%

Influence on week organic acids on pathogens on swine carcasses

The aim of this research was to assess the efficiency of organic acids regarding the main pathogens as Salmonella, Listeria, Campylobacter, Escherichia and Yersinia on pork meat. The fresh meat samples were collected from a slaughterhouse located in Cluj County. The samples were sterilized using UV radiation for 30 minutes and afterword’s contaminated with reference strains of above mentioned pathogens. The samples were subjected to decontamination operation by using solutions of organic acids (acetic, lactic and citric acid) in concentration of 1%, 2% and 3%. After decontamination were isolated and detected microorganisms. Statistic analyses of the results revealed that the investigated pathogens have a different sensitivity to the action of acid solutions, their sensitivity in ascending order being: Escherichia, Listeria, Salmonella, Yersinia, Campylobacter, so the strains of Campylobacter are the most sensitive to the action of the decontaminating agents and germs of Escherichia are the least sensitive. Among the organic acids, the most efficient appears to be lactic acid, followed by acetic acid and less efficient citric acid. The greatest reduction of germs was determined by the concentration of 3%

Enhancement of bone consolidation using high-frequency pulsed electromagnetic fields (HF-PEMFs): An experimental study on rats

In vitro studies showed that high-frequency pulsed electromagnetic fields (HF-PEMFs) increase the activity/expression of early and late osteogenic markers and enhance bone mineralization. The main aim of this study was to investigate the in vivo effects of HF-PEMFs on fracture healing using a rat model. A femur fracture was established by surgery in 20 male Wistar rats. Titanium nails were implanted to reduce and stabilize the fracture. After surgery, 20 rats were equally divided into untreated control and treated group (from the first postoperative day HF-PEMFs at 400 pulses/sec [pps] were applied for 10 minutes/day, for two weeks). Quantitative and qualitative assessment of bone formation was made at two and eight weeks following surgery and included morphological and histological analysis, serological analysis by ELISA, micro-computed tomography (micro-CT), and three-point bending test. At two weeks in HF-PEMF group, soft callus was at a more advanced fibrocartilaginous stage and the bone volume/total tissue volume (BV/TV) ratio in the callus area was significantly higher compared to control group (p = 0.047). Serum concentration of alkaline phosphatase (ALP) and osteocalcin (OC) was significantly higher in HF-PEMF group (ALP p = 0.026, OC p = 0.006) as well as the mechanical strength of femurs (p = 0.03). At eight weeks, femurs from HF-PEMF group had a completely formed woven bone with dense trabeculae, active bone marrow, and had a significantly higher BV/TV ratio compared to control (p = 0.01). HF-PEMFs applied from the first postoperative day, 10 minutes/day for two weeks, enhance bone consolidation in rats, especially in the early phase of fracture healing

The Splicing Factor RBM4 Controls Apoptosis, Proliferation, and Migration to Suppress Tumor Progression

Splicing dysregulation is one of the molecular hallmarks of cancer. However, the underlying molecular mechanisms remain poorly defined. Here we report the splicing factor RBM4 suppresses proliferation and migration of various cancer cells by specifically controlling cancer-related splicing. Particularly, RBM4 regulates Bcl-x splicing to induce apoptosis, and co-expression of Bcl-xL partially reverses the RBM4-mediated tumor suppression. Moreover, RBM4 antagonizes an oncogenic splicing factor, SRSF1, to inhibit mTOR activation. Strikingly, RBM4 expression is dramatically decreased in cancer patients, and RBM4 level is positively correlated with improved survival. In addition to providing mechanistic insights of cancer-related splicing dysregulation, this study establishes RBM4 as a tumor suppressor with therapeutic potentials and clinical values as a prognostic factor

How to Prevent Aseptic Loosening in Cementless Arthroplasty: A Review

Aseptic loosening is the main late postoperative complication of cementless total hip arthroplasties (THAs), leading to pain and functional impairment. This article aims to update the orthopedic surgeon on the various methods by which the aseptic loosening rate can be reduced. We performed a systematic review by searching the PubMed database for hip aseptic loosening. We included meta-analysis, randomized controlled trials, reviews, and systematic reviews in the last 10 years, which provided information on techniques that can prevent aseptic loosening in total hip arthroplasty. From a total of 3205 articles identified, 69 articles (2%) met the inclusion criteria, leading to a total of 36 recommendations. A lot of research has been conducted in terms of septic loosening in the last decade. Currently, we have various techniques by which we can reduce the rate of aseptic loosening. Nevertheless, further randomized clinical trials are needed to expand the recommendations for aseptic loosening prevention

Clinical outcomes after arthroscopically assisted talus fracture fixation

International audiencePurpose: The purpose of this article is to describe the novel technique of arthroscopic-assisted reduction and internal fixation (ARIF) of talar neck fractures, presenting also the outcomes of this treatment method in a series of four patients. Methods: Between 2011 and 2019, we have treated in our service a number of four patients with talar neck fractures, by the arthroscopic technique. The surgical intervention consists in arthroscopic exploration of tibiotalar and subtalar joints, arthroscopic lavage and debridement, reduction, and osteosynthesis with two cannulated screws under both arthroscopic and fluoroscopic control. Post-operative care consists in non-weightbearing immobilization for 6 weeks, followed by partial loading under the protection of a walking brace for the next six weeks and ROM exercises. The patients were followed up at three months, when a CT scan was performed, and at one year, when X-ray images showed the consolidation of fractures. Results: Normal or slightly reduced ROM of the ankle and hindfoot was noted in three out of four patients, absence of any pain, or disability (3 patients). The AOFAS’ Ankle-Hindfoot scale showed good and excellent results; mean score was 92.75 points (86–98p) at one year after the surgery. Conclusion: Arthroscopic-assisted management of talar fractures offers the advantages of minimally invasive surgery combined with good visualization of the fracture, good control of anatomic reduction, and the possibility to treat associated lesions. Main disadvantages of the method are technical difficulties, requires a prolonged learning curve, and offers limited fixation alternatives

Finite Element Analysis of Different Osseocartilaginous Reconstruction Techniques in Animal Model Knees

Lesions of the articular cartilage are frequent in all age populations and lead to functional impairment. Multiple surgical techniques have failed to provide an effective method for cartilage repair. The aim of our research was to evaluate the effect of two different compression forces on three types of cartilage repair using finite element analysis (FEA). Initially, an in vivo study was performed on sheep. The in vivo study was prepared as following: Case 0—control group, without cartilage lesion; Case 1—cartilage lesion treated with macro-porous collagen implants; Case 2—cartilage lesion treated with collagen implants impregnated with bone marrow concentrate (BMC); Case 3—cartilage lesion treated with collagen implants impregnated with adipose-derived stem cells (ASC). Using the computed tomography (CT) data, virtual femur-cartilage-tibia joints were created for each Case. The study showed better results in bone changes when using porous collagen implants impregnated with BMC or ASC stem cells for the treatment of osseocartilaginous defects compared with untreated macro-porous implant. After 7 months postoperative, the presence of un-resorbed collagen influences the von Mises stress distribution, total deformation, and displacement on the Z axis. The BMC treatment was superior to ASC cells in bone tissue morphology, resembling the biomechanics of the control group in all FEA simulations

Biomimetic Composite Coatings for Activation of Titanium Implant Surfaces: Methodological Approach and In Vivo Enhanced Osseointegration

Innovative nanomaterials are required for the coatings of titanium (Ti) implants to ensure the activation of Ti surfaces for improved osseointegration, enhanced bone fracture healing and bone regeneration. This paper presents a systematic investigation of biomimetic composite (BC) coatings on Ti implant surfaces in a rat model of a diaphyseal femoral fracture. Methodological approaches of surface modification of the Ti implants via the usual joining methods (e.g., grit blasting and acid etching) and advanced physicochemical coating via a self-assembled dip-coating method were used. The biomimetic procedure used multi-substituted hydroxyapatite (ms-HAP) HAP-1.5 wt% Mg-0.2 wt% Zn-0.2 wt% Si nanoparticles (NPs), which were functionalized using collagen type 1 molecules (COL), resulting in ms-HAP/COL (core/shell) NPs that were embedded into a polylactic acid (PLA) matrix and finally covered with COL layers, obtaining the ms-HAP/COL@PLA/COL composite. To assess the osseointegration issue, first, the thickness, surface morphology and roughness of the BC coating on the Ti implants were determined using AFM and SEM. The BC-coated Ti implants and uncoated Ti implants were then used in Wistar albino rats with a diaphyseal femoral fracture, both in the absence and the presence of high-frequency pulsed electromagnetic shortwave (HF-PESW) stimulation. This study was performed using a bone marker serum concentration and histological and computer tomography (micro-CT) analysis at 2 and 8 weeks after surgical implantation. The implant osseointegration was evaluated through the bone–implant contact (BIC). The bone–implant interface was investigated using FE-SEM images and EDX spectra of the retrieved surgical implants at 8 weeks in the four animal groups. The obtained results showed significantly higher bone–implants contact and bone volume per tissue volume, as well as a greater amount of newly formed bone, in the BC-coated Ti implants than in the uncoated Ti implants. Direct bone–implant contact was also confirmed via histological examination. The results of this study confirmed that these biomimetic composite coatings on Ti implants were essential for a significant enhancement of osseointegration of BC-coated Ti implants and bone regeneration. This research provides a novel strategy for the treatment of bone fractures with possible orthopedic applications

Low-Molecular-Weight Heparins (LMWH) and Synthetic Factor X Inhibitors Can Impair the Osseointegration Process of a Titanium Implant in an Interventional Animal Study

Background and objectives: Cementless total hip arthroplasty is a common surgical procedure and perioperative thromboprophylaxis is used to prevent deep vein thrombosis or pulmonary embolism. Osseointegration is important for long-term implant survival, and there is no research on the effect of different thromboprophylaxis agents on the process of osseointegration. Materials and Methods: Seventy rats were allocated as follows: Group I (control group), Group II (enoxaparin), Group III (nadroparin), and Group IV (fondaparinux). Ovariectomy was performed on all subjects, followed by the introduction of an intramedullary titanium implant into the femur. Thromboprophylaxis was administered accordingly to each treatment group for 35 days postoperatively. Results: Group I had statistically significantly lower anti-Xa levels compared to treatment groups. Micro-CT analysis showed that nadroparin had lower values compared to control in bone volume (0.12 vs. 0.21, p = 0.01) and percent bone volume (1.46 vs. 1.93, p = 0.047). The pull-out test showed statistically significant differences between the control group (8.81 N) compared to enoxaparin, nadroparin, and fondaparinux groups (4.53 N, 4 N and 4.07 N, respectively). Nadroparin had a lower histological cortical bone tissue and a higher width of fibrous tissue (27.49 μm and 86.9 μm) at the peri-implant area, compared to control (43.2 μm and 39.2 μm), enoxaparin (39.6 μm and 24 μm), and fondaparinux (36.2 μm and 32.7 μm). Conclusions: Short-term administration of enoxaparin, nadroparin, and fondaparinux can reduce the osseointegration of titanium implants, with nadroparin having the most negative effect. These results show that enoxaparin and fondaparinux are preferred to be administered due to a lesser negative impact on the initial implant fixation