Research on selection of abrasive grain size and cutting parameters when grinding of interrupted surface using aluminum oxide grinding wheel with ceramic binder

In this article, a study on intermittent surface grinding using aluminum oxide grinding wheel with ceramic binder is presented. The testing material is 20XH3A steel (GOST standard – Russian Federation). The testing sample has been sawn 6 grooves, with the width of each groove of 10 mm, the grooves are evenly distributed on the circumference of sample. The testing sample resembles a splined shaft. An experimental matrix of nine experiments has been built by Taguchi method, in which abrasive grain size, workpiece speed, feed rate and depth of cut were selected as input variables. At each experiment, surface roughness (Ra) and roundness error (RE) have been measured. Experimental results show that the aluminum oxide and ceramic binder grinding wheels are perfectly suitable for grinding intermittent surface of 20XH3A steel. Data Envelopment Analysis based Ranking (DEAR) method has been used to solve the multi-objective optimization problem. The results also showed that in order to simultaneously ensure minimum surface roughness and RE, abrasive grain size is 80 mesh, workpiece speed is 910 rpm, feed rate is 0.05 mm/rev and depth of cut is 0.01 mm. If evaluating the grinding process through two criteria including surface roughness and RE, depth of cut is the parameter having the greatest effect on the grinding process, followed by the influence of feed rate, workpiece speed, and abrasive grain is the parameter having the least effect on the grinding process. In addition, the effect of each input parameter on each output parameter has also been analyzed, and orientations for further works have also been recommended in this articl

FACTORS AFFECTING MOTIVATION OF ENGLISH-MAJORED STUDENTS TOWARDS LEARNING ENGLISH AT A UNIVERSITY IN THE MEKONG DELTA, VIETNAM

It could be broadly accepted that motivation plays its fundamental role as one of the most important elements in foreign language learning. The present research investigated factors affecting motivation in learning English of freshmen at Tay Do University. The participants were 84 freshmen studying in Faculty of Linguistics and Literature. In the study process, these participants were given questionnaires which consisted of several statements related to the mentioned factors and the interview to get information. The collected data from the two instruments mentioned above were all analyzed afterward. The current study showed that there were elements that motivate freshmen towards English learning. Parental, environmental, teacher’s and intrinsic (personal) factors were examined. It is hoped that this research can be helpful for not only students but also teachers in learning and teaching English. Article visualizations

The influence of scalar unparticle on the production of multiple photons in the Randall- Sundrum model

The influence of scalar unparticle on the production of multiple photons in the Randall- Sundrum model at muon colliders with the center of mass energy $\sqrt{s} = 3 - 10$ TeV is evaluated in detail. The results indicate that the total cross-sections depend strongly on the polarization of the muon and antimuon beams, the collision energy $\sqrt{s}$, the scaling dimension $d_{U}$ of the unparticle operator $\mathcal{O}_{U}$ and the energy scale $\Lambda_{U}$. Numerical evaluation shows that the cross - sections for the production of four - photons at the final state are much larger than the associated production of two - photons with the unparticle under the same conditions.Comment: 13 figures, 1 table. arXiv admin note: text overlap with arXiv:1807.0045

Monte-Carlo Determination of Dose Rates In Spherical Pressurized Water Reactor Shield

The nuclear reactor emits various kinds of nuclear radiations during operation. However, the main contributions to the radiation field in the reactor are given by neutrons and gamma rays. These radiation components are the principal concern of reactor shielding. In our study the neutron and gamma radiation dose rates at different depths in concrete bio-shield of the PWR were calculated based on spherical model for M-C simulation with using MCNP4C2. The simulation results were compared with  the results obtained from calculations based on S$_{8}$P$_{3}$ spherical approximation with using the ANISN code

A RESEARCH ON MULTI-OBJECTIVE OPTIMIZATION OF THE GRINDING PROCESS USING SEGMENTED GRINDING WHEEL BY TAGUCHI-DEAR METHOD

In this study, the mutil-objective optimization was applied for the surface grinding process of SAE420 steel. The aluminum oxide grinding wheels that were grooved by 15 grooves, 18 grooves, and 20 grooves were used in the experimental process. The Taguchi method was applied to design the experimental matrix. Four input parameters that were chosen for each experiment were the number of grooves in cylinder surface of grinding wheel, workpiece velocity, feed rate, and cutting depth. Four output parameters that were measured for each experimental were the machining surface roughness, the system vibrations in the three directions (X, Y, Z). The DEAR technique was applied to determine the values of the input parameters to obtaine the minimum values of machining surface roughness and vibrations in three directions. By using this technique, the optimum values of grinding wheel groove number, workpiece velocity, feed-rate, cutting depth were 18 grooves, 15 m/min, 2 mm/stroke, and 0.005 mm, respectively. The verified experimental was performed by using the optimum values of input parameters. The validation results of surface roughness and vibrations in X, Y, Z directions were 0.826 (µm), 0.531 (µm), 0.549 (µm), and 0. 646 (µm), respectively. These results were great improved in comparing to the normal experimental results. Taguchi method and DEAR technique can be applied to improve the quality of grinding surface and reduce the vibrations of the technology system to restrain the increasing of the cutting forces in the grinding process. Finally, the research direction was also proposed in this stud

A Murnaghan-Nakayama rule for Grothendieck polynomials of Grassmannian type

We consider the Grothendieck polynomials appearing in the K-theory of Grassmannians, which are analogs of Schur polynomials. This paper aims to establish a version of the Murnaghan-Nakayama rule for Grothendieck polynomials of the Grassmannian type. This rule allows us to express the product of a Grothendieck polynomial with a power sum symmetric polynomial into a linear combination of other Grothendieck polynomials.Comment: 10 pages, 7 figure

Optimization of protein extraction from "Cam" rice bran by response surface methodology

"Cam" rice bran was considered a waste product from rice, which is rich in natural compounds and protein owing to its outstanding nutritional value. This study aimed to establish an optimization model for extracting protein from rice bran, with two responses: extraction yield (%) and protein content (%). The variable parameters included were pH (8.5-9.5), stirring time (3.5-4.5 h), and enzyme incubation temperature (85-95°C). The coefficient of determination for both models were above 0.95, indicating a high correlation between the actual and estimated values. The maximum extraction yield and protein content were achieved when the conditions were set at pH of 9.02, stirring time of 4.02 h, and extraction temperature of 90.6°C. Under these optimum conditions, the predicted protein extracted from rice bran was 43.03% (moisture <13.0%), with an extraction yield of 15.9%. The findings of this study suggested that this protocol can enhance the utilization of rice bran and might be employed on a large scale in the food industry to exploit the nutritional source

Tannins: Extraction from Plants

The chapter presents mainly on different extraction methods of tannin. Some technical means required for effective extraction are also presented, for example, collection and treatment of plant and drying and storage of plant. Opportunity and challenges in application of extraction methods are also exhibited in the chapter

Impact of Vocational Education and Training On Decent Job Opportunities Regarding Information and Communication Technology

Vocational education and training plays a crucial part in the creation of decent job. The fast growth of information and communication technology (ICT) during the past ten years has increased work opportunities for laborers. This research uses the yearly labor force survey data to study the impact of vocational education and training on decent job opportunities for employees in the context of Vietnam's information and communication technology development. The logit model results indicate that the 2020 rate of decent jobs is still low, at approximately 25.6 percent. However, vocational education and training and the advancement of ICT positively affect decent job opportunities. This long-lasting impact affects laborers in various areas, regions, and industries. These findings suggest that vocational education and training and ICT must play a significant role in transitioning from precarious to more secure employment, so laborers must acquire professional knowledge and information technology skills

Co-expression of recombinant single chain variable fragment recognizing blood antigen fused with sumo and chaperones in Escherichia coli

Single chain variable fragments (scFv) have widely been used in research, diagnosis and treatment, but the scFv is considered as difficult protein for expression in E. coli. In previous studies, we expressed a construction of recombinant single chain variable fragments again antigen specific for blood type A (antiA-scFv) individually or fused with Trx or SUMO. However, soluble fraction was low abandant and only approximately 40% when fused with Trx, the other cases were expressed in form of inclusion body. Therefore, it was difficult for purification, refolding and activity assesment. In thispaper, we demonstrated a suitable construction for soluble production of antiA-scFv fused with SUMO (SM/antiA-scFv) in presence of chaparones. Under fermentation with 0.1 mM IPTG at 20oC, the SM/antiA-scFv was entirely expressed in soluble form. Importantly, after cleavage from SUMO with SUMOprotease, antiA-scFv was still maintained in the supernatant fraction. Therefore, it can help ensure bioactivity and is useful for purification process. To the best of our knowledge, this is the first report showing soluble recombinant scFv fused with SUMO in presence of chaperone for determination of blood group antigens. Thus, this result facilitates the optimal study of soluble expression, purification and bioactivity determination of the antiA-scFv recombinant antibody.