An international parentage and identification panel for the domestic cat (Felis catus)

Seventeen commercial and research laboratories participated in two comparison tests under the auspices of the International Society for Animal Genetics to develop an internationally tested, microsatellite-based parentage and identification panel for the domestic cat (Felis catus). Genetic marker selection was based on the polymorphism information content and allele ranges from seven random-bred populations (n = 261) from the USA, Europe and Brazil and eight breeds (n = 200) from the USA. Nineteen microsatellite markers were included in the comparison test and genotyped across the samples. Based on robustness and efficiency, nine autosomal microsatellite markers were ultimately selected as a single multiplex ‘core’ panel for cat identification and parentage testing. Most markers contained dinucleotide repeats. In addition to the autosomal markers, the panel included two gender-specific markers, amelogenin and zinc-finger XY, which produced genotypes for both the X and Y chromosomes. This international cat parentage and identification panel has a power of exclusion comparable to panels used in other species, ranging from 90.08% to 99.79% across breeds and 99.47% to 99.87% in random-bred cat populations

Adapting Elements of Cleft Care Protocols in Low- and Middle-income Countries During and After COVID-19: A Process-driven Review With Recommendations

Objective A consortium of global cleft professionals, predominantly from low- and middle-income countries, identified adaptations to cleft care protocols during and after COVID-19 as a priority learning area of need. Design A multidisciplinary international working group met on a videoconferencing platform in a multi-staged process to make consensus recommendations for adaptations to cleft protocols within resource-constrained settings. Feedback was sought from a roundtable discussion forum and global organizations involved in comprehensive cleft care. Results Foundational principles were agreed to enable recommendations to be globally relevant and two areas of focus within the specified topic were identified. First the safety aspects of cleft surgery protocols were scrutinized and COVID-19 adaptations, specifically in the pre- and perioperative periods, were highlighted. Second, surgical procedures and cleft care services were prioritized according to their relationship to functional outcomes and time-sensitivity. The surgical procedures assigned the highest priority were emergent interventions for breathing and nutritional requirements and primary palatoplasty. The cleft care services assigned the highest priority were new-born assessments, pediatric support for children with syndromes, management of acute dental or auditory infections and speech pathology intervention. Conclusions A collaborative, interdisciplinary and international working group delivered consensus recommendations to assist with the provision of cleft care in low- and middle-income countries. At a time of global cleft care delays due to COVID-19, a united approach amongst global cleft care providers will be advantageous to advocate for children born with cleft lip and palate in resource-constrained settings

Histological analysis of surgical lumbar intervertebral disc tissue provides evidence for an association between disc degeneration and increased body mass index

<p>Abstract</p> <p>Background</p> <p>Although histopathological grading systems for disc degeneration are frequently used in research, they are not yet integrated into daily care routine pathology of surgical samples. Therefore, data on histopathological changes in surgically excised disc material and their correlation to clinical parameters such as age, gender or body mass index (BMI) is limited to date. The current study was designed to correlate major physico-clinical parameters from a population of orthopaedic spine center patients (gender, age and BMI) with a quantitative histologic degeneration score (HDS).</p> <p>Methods</p> <p>Excised lumbar disc material from 854 patients (529 men/325 women/mean age 56 (15-96) yrs.) was graded based on a previously validated histologic degeneration score (HDS) in a cohort of surgical disc samples that had been obtained for the treatment of either disc herniation or discogenic back pain. Cases with obvious inflammation, tumor formation or congenital disc pathology were excluded. The degree of histological changes was correlated with sex, age and BMI.</p> <p>Results</p> <p>The HDS (0-15 points) showed significantly higher values in the nucleus pulposus (NP) than in the annulus fibrosus (AF) (Mean: NP 11.45/AF 7.87), with a significantly higher frequency of histomorphological alterations in men in comparison to women. Furthermore, the HDS revealed a positive significant correlation between the BMI and the extent of histological changes. No statistical age relation of the degenerative lesions was seen.</p> <p>Conclusions</p> <p>This study demonstrated that histological disc alterations in surgical specimens can be graded in a reliable manner based on a quantitative histologic degeneration score (HDS). Increased BMI was identified as a positive risk factor for the development of symptomatic, clinically significant disc degeneration.</p

Practice patterns analysis of ocular proton therapy centers the international OPTIC survey

PURPOSE To assess the planning, treatment, and follow up strategies worldwide in dedicated proton therapy ocular programs. METHODS AND MATERIALS Ten centers from 7 countries completed a questionnaire survey with 109 queries on the eye treatment planning system TPS , hardware software equipment, image acquisition registration, patient positioning, eye surveillance, beam delivery, quality assurance QA , clinical management, and workflow. RESULTS Worldwide, 28,891 eye patients were treated with protons at the 10 centers as of the end of 2014. Most centers treated a vast number of ocular patients 1729 to 6369 . Three centers treated fewer than 200 ocular patients. Most commonly, the centers treated uveal melanoma UM and other primary ocular malignancies, benign ocular tumors, conjunctival lesions, choroidal metastases, and retinoblastomas. The UM dose fractionation was generally within a standard range, whereas dosing for other ocular conditions was not standardized. The majority 80 of centers used in common a specific ocular TPS. Variability existed in imaging registration, with magnetic resonance imaging MRI rarely being used in routine planning 20 . Increased patient to full time equivalent ratios were observed by higher accruing centers P .0161 . Generally, ophthalmologists followed up the post radiation therapy patients, though in 40 of centers radiation oncologists also followed up the patients. Seven centers had a prospective outcomes database. All centers used a cyclotron to accelerate protons with dedicated horizontal beam lines only. QA checks range, modulation varied substantially across centers. CONCLUSIONS The first worldwide multi institutional ophthalmic proton therapy survey of the clinical and technical approach shows areas of substantial overlap and areas of progress needed to achieve sustainable and systematic management. Future international efforts include research and development for imaging and planning software upgrades, increased use of MRI, development of clinical protocols, systematic patient centered data acquisition, and publishing guidelines on QA, staffing, treatment, and follow up parameters by dedicated ocular programs to ensure the highest level of care for ocular patient

Análise fotoelástica de parafuso de sistema de fixação vertebral The photoelastic analisys of vertebral fixation system screws

INTRODUÇÃO: A fotoelasticidade é utilizada para avaliar as tensões/deformações produzidas nos materiais fotoelásticos, quando submetidos a determinado carregamento, através da observação de efeitos óticos. O desempenho do parafuso e as funções mecânicas estão diretamente relacionados com a qualidade da fixação dos parafusos nas vértebras. A fotoelasticidade é uma ferramenta importante para realizar estudos comparativos desta natureza. OBJETIVO: O objetivo deste estudo foi comparar por meio da fotoelasticidade, as tensões internas produzidas pelo parafuso com 6 mm de diâmetro externo, quando submetido a duas diferentes forças de arrancamento. MATERIAIS E MÉTODOS: Para isso, foram confeccionados quatro modelos fotoelásticos. A simulação foi realizada utilizando duas forças de arrancamento 0,75 e 1,50 kgf. As tensões cisalhantes foram calculadas nos 19 pontos em torno dos parafusos, utilizando o método de compensação de Tardy. RESULTADOS: Os valores das tensões cisalhantes foram maiores quando utilizada a força de arrancamento de 1,50 kgf. CONCLUSÃO: Assim sendo, o parafuso estará mais suscetível ao arrancamento com a aplicação de força de maior intensidade. De acordo com as análises realizadas verificamos também que o local de maior tensão cisalhante foi observado no pico das cristas, principalmente próxima às pontas dos parafusos, independente da força utilizada.<br>INTRODUCTION: The photoelasticity is used for assessing the tensions/deformations involved in photoelastic materials when submitted to a given load by the observation of optical effects. The screw performance and mechanical functions are directly associated to the quality of the screws fixation in the vertebrae. Photoelasticity is an important tool to perform comparative studies of this nature OBJECTIVE: The aim of this study was to compare, by using photoelasticity, internal stresses produced by the screw with an external diameter of 6 mm, when submitted to two different pullout strengths. MATERIALS AND METHODS: For this, four photoelastic models were produced. The simulation was conducted by using two pullout strengths: 0.75 and 1.50 kgf. The maximum shear stresses were calculated on 19 points around the screws, using the Tardy compensation method. RESULTS: The values of maximum shear stress were higher with the load of 1.50 kgf. CONCLUSION: Thus, the screw will be more susceptible to pullout when heavier loads are applied. According to our analysis, we also found that the site with the highest maximum shear stress was found to be at the peak of creast, particularly near the tips of the screws, regardless of the load employed

Surgical management for upper thoracic spine tumors by a transmanubrium approach and a new space

The anterior aspect of the upper thoracic spine is a difficult region to approach in spinal surgery. Many vital structures including osseus, articular, vascular and nervous ones hinder the exposure. With increasing frequency, spine surgeons are being asked to provide decompression and stabilization in patients with spinal tumors .The traditional exposure is between the esophagus and trachea medially and the left common carotid or the brachiocephalic artery (BCA) laterally, and the disadvantages were that the ligation and section of the left innominate vein is proposed to reach T4 and the injury of the thoracic duct could occur. The right space of the BCA or the ascending aorta (AA) (the exposure between the right brachiocephalic vein and the BCA or between the AA and superior caval vein) is recommended in exposing the upper thoracic vertebrae; this new space is technically feasible; the exposure is sufficient for vertebral body resection and reconstruction and fixation. Twenty-eight patients with upper thoracic spine tumors underwent surgery by the use of this new space between June 2000 and October 2005. A strut graft was fixed anteriorly after decompression of the spinal cord. Levels C7–T5 can be well exposed through this new space, allowing complete vertebral body removal at level T1–T4. After body removal, the posterior longitudinal ligament is well exposed, allowing complete release of the spinal cord. Curettage was performed in one case of aneurysmal bone cyst and three cases of bone giant cell tumors. For other tumors, vertebrectomies or sagittal resections were performed. Four patients underwent surgery by a combination of anterior and posterior approach