Designer Supersurafaces via Bioinspiration and Biomimetics for Dental materials and Structures

The design of surfaces and interfaces gives rise to superior qualities and properties to materials and structures. The interface between biology and materials in nature is being closely examined at the smallest scales for a number of significant reasons. It is recognised that the properties of surfaces have definite biological effects that can be harnessed in clinical regeneration biology. Also the deeper understanding of surface interactions between cells and matrices in human biology is spurring the fabrication of biomimetic and bioinspired versions of these natural designs. The new emerging science of bioinspired surface engineering is helping to improve clinical performances for biomaterials and biostructures because it resolves the problems necessary to optimise integration of implant biomaterials and structures. One of the major developments is the use of surface topography, which is now being exploited for microbial control, steering stem cell behaviours in proliferation and differentiation and adhesive surfaces for better bonding with tissues. In this Chapter we will explore the status of these super surfaces and examine the possibilities for the next generation of dental biomaterials and implants.published_or_final_versio

Determination of Hydrogen Diffusion Parameters of Ferritic Steel from Electrochemical Permeation Measurement under Tensile Loads

The hydrogen permeation experiment, performed with a stepwise permeation sequence involving "1st permeation-desorption-2nd permeation under loading, demonstrates that fine blister cracks are frequently observed on the steel surface in hydrogen charging side after the 2nd permeation under the load over 95% of yield strength of the steel. To accommodate the experimental phenomena under the loading conditions, a numerical model is developed for determination of hydrogen diffusion parameters of the sour-resistant ferritic steel evaluated under tensile stress in plastic ranges. To solve the modified diffusion equation, a numerical finite difference method (FDM) is employed. The diffusion parameters determined by curve-fitting with the newly proposed diffusion equation indicates that, with the transition of mechanical domain from local-plasticity to generalized-plasticity, a big increase in the crack formation rate and hydrogen capture rate per irreversible trap are observed. It suggests that the transition probability for hydrogen transport from interstitial lattice site to irreversible trap site increases with the stress level. (C) The Author(s) 2014. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited. All rights reserved.1110Ysciescopu

Superconducting receiver coils for sodium magnetic resonance imaging

Presents the results from sodium magnetic resonance imaging (MRI) experiments using high-temperature superconducting (HTS) receiver coils. Sodium imaging has been shown to have great potential for the assessment of cell integrity but suffers from substantially lower signal-to-noise ratio (SNR) than that of hydrogen imaging. The use of an HTS receiver coil was found to significantly increase the SNR relative to an equivalent copper receiver coil at room temperature. The SNR gains afforded by HTS coils can also be used to decrease the imaging time.published_or_final_versio

High Quality Bioreplication of Intricate nanostructures from a Fragile Gecko Skin Surface with Bactericidal Properties

published_or_final_versio

Computer-aided multiple-head 3D printing system for printing of heterogeneous organ/tissue constructs

Recently, much attention has focused on replacement or/and enhancement of biological tissues via the use of cell-laden hydrogel scaffolds with an architecture that mimics the tissue matrix, and with the desired three-dimensional (3D) external geometry. However, mimicking the heterogeneous tissues that most organs and tissues are formed of is challenging. Although multiple-head 3D printing systems have been proposed for fabricating heterogeneous cell-laden hydrogel scaffolds, to date only the simple exterior form has been realized. Here we describe a computer-aided design and manufacturing (CAD/CAM) system for this application. We aim to develop an algorithm to enable easy, intuitive design and fabrication of a heterogeneous cell-laden hydrogel scaffolds with a free-form 3D geometry. The printing paths of the scaffold are automatically generated from the 3D CAD model, and the scaffold is then printed by dispensing four materials; i.e., a frame, two kinds of cell-laden hydrogel and a support. We demonstrated printing of heterogeneous tissue models formed of hydrogel scaffolds using this approach, including the outer ear, kidney and tooth tissue. These results indicate that this approach is particularly promising for tissue engineering and 3D printing applications to regenerate heterogeneous organs and tissues with tailored geometries to treat specific defects or injuries.open112321sciescopu

The good, the bad and the ugly: pandemic priority decisions and triage.

In this analysis we discuss the change in criteria for triage of patients during three different phases of a pandemic like COVID-19, seen from the critical care point of view. Availability of critical care beds has become a hot topic, and in many countries, we have seen a huge increase in the provision of temporary intensive care bed capacity. However, there is a limit where the hospitals may run out of resources to provide critical care, which is heavily dependent on trained staff, just-in-time supply chains for clinical consumables and drugs and advanced equipment. In the first (good) phase, we can still do clinical prioritisation and decision-making as usual, based on the need for intensive care and prognostication: what are the odds for a good result with regard to survival and quality of life. In the next (bad phase), the resources are mostly available, but the system is stressed by many patients arriving over a short time period and auxiliary beds in different places in the hospital being used. We may have to abandon admittance of patients with doubtful prognosis. In the last (ugly) phase, usual medical triage and priority setting may not be sufficient to decrease inflow and there may not be enough intensive care unit beds available. In this phase different criteria must be applied using a utilitarian approach for triage. We argue that this is an important transition where society, and not physicians, must provide guidance to support triage that is no longer based on medical priorities alone

Novel and simple patterning process of quantum dots via transfer printing for active matrix qd-led

© 2020 SID. The next generation of a self-emitting display requires precise and stable patterning techniques to shape Red, Green, and Blue pixels using quantum dots. In this study, we propose the novel and simple transfer printing process for the active matrix QD-LEDs

The validity of using ICD-9 codes and pharmacy records to identify patients with chronic obstructive pulmonary disease

Background: Administrative data is often used to identify patients with chronic obstructive pulmonary disease (COPD), yet the validity of this approach is unclear. We sought to develop a predictive model utilizing administrative data to accurately identify patients with COPD. Methods: Sequential logistic regression models were constructed using 9573 patients with postbronchodilator spirometry at two Veterans Affairs medical centers (2003-2007). COPD was defined as: 1) FEV1/FVC <0.70, and 2) FEV1/FVC < lower limits of normal. Model inputs included age, outpatient or inpatient COPD-related ICD-9 codes, and the number of metered does inhalers (MDI) prescribed over the one year prior to and one year post spirometry. Model performance was assessed using standard criteria. Results: 4564 of 9573 patients (47.7%) had an FEV1/FVC < 0.70. The presence of ≥1 outpatient COPD visit had a sensitivity of 76% and specificity of 67%; the AUC was 0.75 (95% CI 0.74-0.76). Adding the use of albuterol MDI increased the AUC of this model to 0.76 (95% CI 0.75-0.77) while the addition of ipratropium bromide MDI increased the AUC to 0.77 (95% CI 0.76-0.78). The best performing model included: ≥6 albuterol MDI, ≥3 ipratropium MDI, ≥1 outpatient ICD-9 code, ≥1 inpatient ICD-9 code, and age, achieving an AUC of 0.79 (95% CI 0.78-0.80). Conclusion: Commonly used definitions of COPD in observational studies misclassify the majority of patients as having COPD. Using multiple diagnostic codes in combination with pharmacy data improves the ability to accurately identify patients with COPD.Department of Veterans Affairs, Health Services Research and Development (DHA), American Lung Association (CI- 51755-N) awarded to DHA, the American Thoracic Society Fellow Career Development AwardPeer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/84155/1/Cooke - ICD9 validity in COPD.pd

Effect of prolonged HAART on oral colonization with Candida and candidiasis

BACKGROUND: Progressive cell-mediated immunodeficiency with decrease of CD4+ lymphocyte count to less than or equal to 200 cells/mm(3 )is a major risk factor for colonization with Candida species and development of candidiasis. Oropharyngeal candidiasis may occur in up to 90% of human immunodeficiency virus (HIV)-infected patients during the course of the disease. This study is to determine the effect of prolonged highly active antiretroviral therapy (HAART) on oropharyngeal colonization with Candida species and oral candidiasis. METHODS: A prospective, longitudinal follow-up study in HIV-infected patients receiving HAART. RESULTS: The mean CD4+ count increased from 232.5 to 316 cells/mm(3 )and the proportion of patients whose CD4+ count less than 200 cells/mm(3 )decreased from 50.0% to 28.9% (p = 0.0003) in patients receiving HAART for at least 2 years. The prevalence of oral candidiasis decreased from 10.6% to 2.1% (p = 0.004). The decrease in Candida colonization was less impressive, falling from 57.8% to 46.5 % (p = 0.06). Of the 142 patients enrolled in at least two surveys, 48 (33.8%) remained colonized with Candida and 42 (29.6%) remained negative. In the remaining 52 patients, 34 switched from culture positive to negative, and an increase in CD4+ lymphocytes was noted in 91.2% of them. Among the 18 patients who switched from culture negative to positive, 61.1% also demonstrated an increase in CD4+ lymphocyte count (p = 0.01). CONCLUSION: These findings indicate that HAART is highly effective in decreasing oral candidiasis in association with a rise in CD4+ lymphocyte counts, but only marginally effective in eliminating Candida from the oropharynx