Optimising in situ gamma measurements to identify the presence of radioactive particles in land areas

High-coverage in situ surveys with gamma detectors are the best means of identifying small hotspots of activity, such as radioactive particles, in land areas. Scanning surveys can produce rapid results, but the probabilities of obtaining false positive or false negative errors are often unknown, and they may not satisfy other criteria such as estimation of mass activity concentrations. An alternative is to use portable gamma-detectors that are set up at a series of locations in a systematic sampling pattern, where any positive measurements are subsequently followed up in order to determine the exact location, extent and nature of the target source. The preliminary survey is typically designed using settings of detector height, measurement spacing and counting time that are based on convenience, rather than using settings that have been calculated to meet requirements. This paper introduces the basis of a repeatable method of setting these parameters at the outset of a survey, for pre-defined probabilities of false positive and false negative errors in locating spatially small radioactive particles in land areas. It is shown that an un-collimated detector is more effective than a collimated detector that might typically be used in the field

Evaluating airborne and ground based gamma spectrometry methods for detecting particulate radioactivity in the environment: a case study of Irish Sea beaches

In several places, programmes are in place to locate and recover radioactive particles that have the potential to cause detrimental health effects in any member of the publicwho may encounter them. A model has been developed to evaluate the use of mobile gamma spectrometry systems within such programmes, with particular emphasis on large volume (16 l) NaI(Tl) detectors mounted in low flying helicopters. This model uses a validated Monte Carlo code with assessment of local geochemistry and natural and anthropogenic background radiation concentrations and distributions. The results of the model, applied to the example of particles recovered from beaches in the vicinity of Sellafield, clearly show the ability of rapid airborne surveys conducted at 75 m ground clearance and 120 kph speeds to demonstrate the absence of sources greater than 5 MBq 137Cs within large areas (10–20 km2 h−1), and identify areas requiring further ground based investigation. Lowering ground clearance for airborne surveys to 15 m whilst maintaining speeds covering 1–2 km2 h−1 can detect buried 137Cs sources of 0.5 MBq or greater activity. A survey design to detect 100 kBq 137Cs sources at 10 cm depth has also been defined, requiring surveys at b15 m ground clearance and b2 m s−1 ground speed. The response of airborne systems to the Sellafield particles recovered to date has also been simulated, and the proportion of the existing radiocaesium background in the vicinity of the nuclear site has been established. Finally the rates of area coverage and sensitivities of both airborne and ground based approaches are compared, demonstrating the ability of airborne systems to increase the rate of particle recovery in a cost effective manner. The potential for equipment and methodological developments to improve performance are discussed

The radium legacy: Contaminated land and the committed effective dose from the ingestion of radium contaminated materials

The manufacture and use of radium in the early to mid-20th century within industrial, medicinal and recreational products have resulted in a large number of contaminated sites across a number of countries with notable examples in the USA and Europe. These sites, represent a significant number of unregulated sources of potential radiological exposure that have collectively and hitherto not been well characterised. In 2007, the Radioactive Contaminated Land (RCL) Regulations came into force in the UK, providing the statutory guidance for regulators to classify and deal with RCL. Here we report on results derived from digestion experiments to estimate committed effective dose, a key aspect of the RCL Regulations, from the ingestion of radium contaminated sources that can be found in the environment. This case study includes particles, clinker and artefacts that arise from past military activities on a site that was once an airfield at Dalgety Bay on the Firth of Forth, UK. Since 2011 the number of radium contaminated finds has increased by one order of magnitude on the foreshore areas of Dalgety Bay. The increase in finds may in large part be attributed to a change in monitoring practice. A subsample of sixty sources was selected, on the basis of their activity and dimensions, and subjected to digestion in simulated stomach and lower intestine solutions. The study demonstrated that more radium-226 (226Ra) and lead-210 (210Pb; driven by Polonium solubility) are dissolved from sources in artificial ‘stomach' solutions compared with ‘lower intestine' solutions. The combined ‘gut' solubility for 226Ra and apparent 210Pb varied from less than 1% to up to 35% ICRP 72 conversion factors were used to convert the activities measured in solution to committed effective dose. A little over 10% of the sources tested dissolved sufficient radioactivity to result in 100 mSv committed effective dose to an infant. Using the solubility of 35% as a worst case, minimum source activities necessary to deliver 100 mSv to the full age range of users of the foreshore were estimated. All the estimated activities have been detected and recovered through routine monitoring