Observed dynamic soil–structure interaction in scale testing of offshore wind turbine foundations

Monopile foundations have been commonly used to support offshore wind turbine generators (WTGs), but this type of foundation encounters economic and technical limitations for larger WTGs in water depths exceeding 30 m. Offshore wind farm projects are increasingly turning to alternative multipod foundations (for example tetrapod, jacket and tripods) supported on shallow foundations to reduce the environmental effects of piling noise. However the characteristics of these foundations under dynamic loading or long term cyclic wind turbine loading are not fully understood. This paper summarises the results from a series of small scaled tests (1:100, 1:150 and 1:200) of a complete National Renewable Energy Laboratory (NREL) wind turbine model on three types of foundations: monopiles, symmetric tetrapod and asymmetric tripod. The test bed used consists of either kaolin clay or sand and up to 1.4 million loading cycles were applied. The results showed that the multipod foundations (symmetric or asymmetric) exhibit two closely spaced natural frequencies corresponding to the rocking modes of vibration in two principle axes. Furthermore, the corresponding two spectral peaks change with repeated cycles of loading and they converge for symmetric tetrapods but not for asymmetric tripods. From the fatigue design point of view, the two spectral peaks for multipod foundations broaden the range of frequencies that can be excited by the broadband nature of the environmental loading (wind and wave) thereby impacting the extent of motions. Thus the system lifespan (number of cycles to failure) may effectively increase for symmetric foundations as the two peaks will tend to converge. However, for asymmetric foundations the system life may continue to be affected adversely as the two peaks will not converge. In this sense, designers should prefer symmetric foundations to asymmetric foundations

Formic acid synthesis using CO₂ as raw material: Techno-economic and environmental evaluation and market potential

The future of carbon dioxide utilisation (CDU) processes, depend on (i) the future demand of synthesised products with CO₂, (ii) the availability of captured and anthropogenic CO₂, (iii) the overall CO₂ not emitted because of the use of the CDU process, and (iv) the economics of the plant. The current work analyses the mentioned statements through different technological, economic and environmental key performance indicators to produce formic acid from CO₂, along with their potential use and penetration in the European context. Formic acid is a well-known chemical that has potential as hydrogen carrier and as fuel for fuel cells. This work utilises process flow modelling, with simulations developed in CHEMCAD, to obtain the energy and mass balances, and the purchase equipment cost of the formic acid plant. Through a financial analysis, with the net present value as selected metric, the price of the tonne of formic acid and of CO₂ are varied to make the CDU project financially feasible. According to our research, the process saves CO₂ emissions when compared to its corresponding conventional process, under specific conditions. The success or effectiveness of the CDU process will also depend on other technologies and/or developments, like the availability of renewable electricity and steam

Fatigue Analysis of a Point Absorber Wave Energy Converter Subjected to Passive and Reactive Control

This paper investigates the effect of a passive and reactive control mechanism on the accumulated fatigue damage of a wave energy converter (WEC). Interest is focused on four structural details of the Wavestar arm which is used as a case study here. The fatigue model is set up as an independent and generic toolbox which can be applied to any other global response model of a WEC device combined with a control system. The stress responses due to the stochastic wave loads are computed by a FEM model using the frequency-domain approach. The fatigue damage is calculated based on the spectral-based fatigue analysis in which the fatigue is described by the given spectral moments of the stress response. The question will be discussed, which control case is more favorable regarding the trade off between fatigue damage reduction and increased power production