5,534 research outputs found
Direct Measurement of the Top Quark Mass at D0
We determine the top quark mass m_t using t-tbar pairs produced in the D0
detector by \sqrt{s} = 1.8 TeV p-pbar collisions in a 125 pb^-1 exposure at the
Fermilab Tevatron. We make a two constraint fit to m_t in t-tbar -> b W^+bbar
W^- final states with one W boson decaying to q-qbar and the other to e-nu or
mu-nu. Likelihood fits to the data yield m_t(l+jets) = 173.3 +- 5.6 (stat) +-
5.5 (syst) GeV/c^2. When this result is combined with an analysis of events in
which both W bosons decay into leptons, we obtain m_t = 172.1 +- 5.2 (stat) +-
4.9 (syst) GeV/c^2. An alternate analysis, using three constraint fits to fixed
top quark masses, gives m_t(l+jets) = 176.0 +- 7.9 (stat) +- 4.8 (syst)
GeV/C^2, consistent with the above result. Studies of kinematic distributions
of the top quark candidates are also presented.Comment: 43 pages, 53 figures, 33 tables. RevTeX. Submitted to Phys. Rev.
Probing BFKL Dynamics in the Dijet Cross Section at Large Rapidity Intervals in ppbar Collisions at sqrt{s}=1800 and 630 GeV
Inclusive dijet production at large pseudorapidity intervals (delta_eta)
between the two jets has been suggested as a regime for observing BFKL
dynamics. We have measured the dijet cross section for large delta_eta in ppbar
collisions at sqrt{s}=1800 and 630 GeV using the DO detector. The partonic
cross section increases strongly with the size of delta_eta. The observed
growth is even stronger than expected on the basis of BFKL resummation in the
leading logarithmic approximation. The growth of the partonic cross section can
be accommodated with an effective BFKL intercept of
a_{BFKL}(20GeV)=1.65+/-0.07.Comment: Published in Physical Review Letter
Search for Charged Higgs Bosons in Decays of Top Quark Pairs
We present a search for charged Higgs bosons in decays of pair-produced top
quarks using 109.2 +- 5.8 pb^-1 of data recorded from ppbar collisions at
sqrt{s} = 1.8 TeV by the D0 detector during 1992-96 at the Fermilab Tevatron.
No evidence is found for charged Higgs production, and most parts of the
[m(H+),tan(beta)] parameter space where the decay t -> bH+ has a branching
fraction close to or larger than that for t -> bW+ are excluded at 95%
confidence level. Assuming m(t) = 175 GeV and sigma(ppbar -> ttbar) = 5.5 pb,
for m(H+) = 60 GeV, we exclude tan(beta) 40.9.Comment: 11 pages, 3 figures, submitted to PR
Search for New Physics in e mu X Data at D0 Using Sleuth: A Quasi-Model-Independent Search Strategy for New Physics
We present a quasi-model-independent search for the physics responsible for
electroweak symmetry breaking. We define final states to be studied, and
construct a rule that identifies a set of relevant variables for any particular
final state. A new algorithm ("Sleuth") searches for regions of excess in those
variables and quantifies the significance of any detected excess. After
demonstrating the sensitivity of the method, we apply it to the semi-inclusive
channel e mu X collected in 108 pb^-1 of ppbar collisions at sqrt(s) = 1.8 TeV
at the D0 experiment during 1992-1996 at the Fermilab Tevatron. We find no
evidence of new high p_T physics in this sample.Comment: 23 pages, 12 figures. Submitted to Physical Review
Evidence of Color Coherence Effects in W+jets Events from ppbar Collisions at sqrt(s) = 1.8 TeV
We report the results of a study of color coherence effects in ppbar
collisions based on data collected by the D0 detector during the 1994-1995 run
of the Fermilab Tevatron Collider, at a center of mass energy sqrt(s) = 1.8
TeV. Initial-to-final state color interference effects are studied by examining
particle distribution patterns in events with a W boson and at least one jet.
The data are compared to Monte Carlo simulations with different color coherence
implementations and to an analytic modified-leading-logarithm perturbative
calculation based on the local parton-hadron duality hypothesis.Comment: 13 pages, 6 figures. Submitted to Physics Letters
Tooling design and microwave curing technologies for the manufacturing of fiber-reinforced polymer composites in aerospace applications
The increasing demand for high-performance and quality polymer composite materials has led to international research effort on pursuing advanced tooling design and new processing technologies to satisfy the highly specialized requirements of composite components used in the aerospace industry. This paper reports the problems in the fabrication of advanced composite materials identified through literature survey, and an investigation carried out by the authors about the composite manufacturing status in China’s aerospace industry. Current tooling design technologies use tooling materials which cannot match the thermal expansion coefficient of composite parts, and hardly consider the calibration of tooling surface. Current autoclave curing technologies cannot ensure high accuracy of large composite materials because of the wide range of temperature gradients and long curing cycles. It has been identified that microwave curing has the potential to solve those problems. The proposed technologies for the manufacturing of fiber-reinforced polymer composite materials include the design of tooling using anisotropy composite materials with characteristics for compensating part deformation during forming process, and vacuum-pressure microwave curing technology. Those technologies are mainly for ensuring the high accuracy of anisotropic composite parts in aerospace applications with large size (both in length and thickness) and complex shapes. Experiments have been carried out in this on-going research project and the results have been verified with engineering applications in one of the project collaborating companies
Search For Heavy Pointlike Dirac Monopoles
We have searched for central production of a pair of photons with high
transverse energies in collisions at TeV using of data collected with the D\O detector at the Fermilab Tevatron in
1994--1996. If they exist, virtual heavy pointlike Dirac monopoles could
rescatter pairs of nearly real photons into this final state via a box diagram.
We observe no excess of events above background, and set lower 95% C.L. limits
of on the mass of a spin 0, 1/2, or 1 Dirac
monopole.Comment: 12 pages, 4 figure
The Dijet Mass Spectrum and a Search for Quark Compositeness in bar{p}p Collisions at sqrt{s} = 1.8 TeV
Using the DZero detector at the 1.8 TeV pbarp Fermilab Tevatron collider, we
have measured the inclusive dijet mass spectrum in the central pseudorapidity
region |eta_jet| < 1.0 for dijet masses greater than 200 Gev/c^2. We have also
measured the ratio of spectra sigma(|eta_jet| < 0.5)/sigma(0.5 < |eta_jet| <
1.0). The order alpha_s^3 QCD predictions are in good agreement with the data
and we rule out models of quark compositeness with a contact interaction scale
< 2.4 TeV at the 95% confidence level.Comment: 11 pages, 4 figures, 2 tables, submitted to Phys. Rev. Let
Search for High Mass Photon Pairs in p-pbar --> gamma-gamma-jet-jet Events at sqrt(s)=1.8 TeV
A search has been carried out for events in the channel p-barp --> gamma
gamma jet jet. Such a signature can characterize the production of a
non-standard Higgs boson together with a W or Z boson. We refer to this
non-standard Higgs, having standard model couplings to vector bosons but no
coupling to fermions, as a "bosonic Higgs." With the requirement of two high
transverse energy photons and two jets, the diphoton mass (m(gamma gamma))
distribution is consistent with expected background. A 90(95)% C.L. upper limit
on the cross section as a function of mass is calculated, ranging from
0.60(0.80) pb for m(gamma gamma) = 65 GeV/c^2 to 0.26(0.34) pb for m(gamma
gamma) = 150 GeV/c^2, corresponding to a 95% C.L. lower limit on the mass of a
bosonic Higgs of 78.5 GeV/c^2.Comment: 9 pages, 3 figures. Replacement has new H->gamma gamma branching
ratios and corresponding new mass limit
Search for Squarks and Gluinos in Events Containing Jets and a Large Imbalance in Transverse Energy
Using data corresponding to an integrated luminosity of 79 pb-1, D0 has
searched for events containing multiple jets and large missing transverse
energy in pbar-p collisions at sqrt(s)=1.8 TeV at the Fermilab Tevatron
collider. Observing no significant excess beyond what is expected from the
standard model, we set limits on the masses of squarks and gluinos and on the
model parameters m_0 and m_1/2, in the framework of the minimal low-energy
supergravity models of supersymmetry. For tan(beta) = 2 and A_0 = 0, with mu <
0, we exclude all models with m_squark < 250 GeV/c^2. For models with equal
squark and gluino masses, we exclude m < 260 GeV/c^2.Comment: 10 pages, 3 figures, Submitted to PRL, Fixed typo on page bottom of
p. 6 (QCD multijet background is 35.4 events
- …