The actin-bundling protein Fascin is overexpressed in inflammatory bowel disease and may be important in tissue repair

<b>Background</b> Fascin is associated with increased cell motility in colorectal tumours but is absent from the normal colonic epithelium. We examined the expression of fascin in inflammatory bowel disease (IBD) and its location at regions undergoing restitution and regeneration. Tissue repair is essential for disease remission and we sought to determine the effects of therapeutic modalities on fascin expression and function using an in vitro model.<p></p> <b>Methods</b> Immunohistochemistry was performed on colonic tissue from IBD patients to determine changes in fascin expression and distribution. A human colorectal epithelial cell line was treated with 5-aminosalicylate (a common treatment for IBD), or sodium butyrate to determine the effect on fascin expression and cell motility.<p></p> <b>Results</b> Fascin overexpression was observed in both ulcerative colitis and Crohn's colitis and expression correlated with disease severity. Immunoreactivity was more intense and widespread in Crohn's compared to ulcerative colitis. Interestingly, highly expressing foci were consistently observed at the edges of ulcers where flattened, motile epithelial cells are actively involved in restitution, and also in areas of mucosal regeneration. 5-aminosalicylate reduced fascin expression in colorectal epithelial cells and inhibited their motility. Conversely, sodium butyrate increased fascin expression and stimulated cell motility in the same cells.<p></p> <b>Conclusions</b> Our data shows that fascin is overexpressed in inflammatory bowel disease and its location is indicative of a role in tissue repair. Our in vitro studies show that different therapeutic modalities may have converse effects on fascin expression and may have significant consequences for disease remission and the clinical management of IBD

Does dietary calcium interact with dietary fiber against colorectal cancer? : a case-control study in Central Europe

BACKGROUND: An unfavorable trend of increasing rates of colorectal cancer has been observed across modern societies. In general, dietary factors are understood to be responsible for up to 70% of the disease’s incidence, though there are still many inconsistencies regarding the impact of specific dietary items. Among the dietary minerals, calcium intake may play a crucial role in the prevention. The purpose of this study was to assess the effect of intake of higher levels of dietary calcium on the risk of developing of colorectal cancer, and to evaluate dose dependent effect and to investigate possible effect modification. METHODS: A hospital based case–control study of 1556 patients (703 histologically confirmed colon and rectal incident cases and 853 hospital-based controls) was performed between 2000–2012 in Krakow, Poland. The 148-item semi-quantitative Food Frequency Questionnaire to assess dietary habits and level of nutrients intake was used. Data regarding possible covariates was also collected. RESULTS: After adjustment for age, gender, education, consumption of fruits, raw and cooked vegetables, fish, and alcohol, as well as for intake of fiber, vitamin C, dietary iron, lifetime recreational physical activity, BMI, smoking status, and taking mineral supplements, an increase in the consumption of calcium was associated with the decrease of colon cancer risk (OR = 0.93, 95% CI: 0.89-0.98 for every 100 mg Ca/day increase). Subjects consumed >1000 mg/day showed 46% decrease of colon cancer risk (OR = 0.54, 95% CI: 0.35-0.83). The effect of dietary calcium was modified by dietary fiber (p for interaction =0.015). Finally, consistent decrease of colon cancer risk was observed across increasing levels of dietary calcium and fiber intake. These relationships were not proved for rectal cancer. CONCLUSIONS: The study confirmed the effect of high doses of dietary calcium against the risk of colon cancer development. This relationship was observed across different levels of dietary fiber, and the beneficial effect of dietary calcium depended on the level of dietary fiber suggesting modification effect of calcium and fiber. Further efforts are needed to confirm this association, and also across higher levels of dietary fiber intake

Effects of intervention with sulindac and inulin/VSL#3 on mucosal and luminal factors in the pouch of patients with familial adenomatous polyposis

Contains fulltext : 97862.pdf (publisher's version ) (Open Access)BACKGROUND/AIM: In order to define future chemoprevention strategies for adenomas or carcinomas in the pouch of patients with familial adenomatous polyposis (FAP), a 4-weeks intervention with (1) sulindac, (2) inulin/VSL#3, and (3) sulindac/inulin/VSL#3 was performed on 17 patients with FAP in a single center intervention study. Primary endpoints were the risk parameters cell proliferation and glutathione S-transferase (GST) detoxification capacity in the pouch mucosa; secondary endpoints were the short chain fatty acid (SCFA) contents, pH, and cytotoxicity of fecal water. METHODS: Before the start and at the end of each 4-week intervention period, six biopsies of the pouch were taken and feces was collected during 24 h. Cell proliferation and GST enzyme activity was assessed in the biopsies and pH, SCFA contents, and cytotoxicity were assessed in the fecal water fraction. The three interventions (sulindac, inulin/VSL#3, sulindac/inulin/VSL#3) were compared with the Mann-Whitney U test. RESULTS: Cell proliferation was lower after sulindac or VSL#3/inulin, the combination treatment with sulindac/inulin/VSL#3 showed the opposite. GST enzyme activity was increased after sulindac or VSL#3/inulin, the combination treatment showed the opposite effect. However, no significance was reached in all these measures. Cytotoxicity, pH, and SCFA content of fecal water showed no differences at all among the three treatment groups. CONCLUSION: Our study revealed non-significant decreased cell proliferation and increased detoxification capacity after treatment with sulindac or VSL#3/inulin; however, combining both regimens did not show an additional effect

Iron Behaving Badly: Inappropriate Iron Chelation as a Major Contributor to the Aetiology of Vascular and Other Progressive Inflammatory and Degenerative Diseases

The production of peroxide and superoxide is an inevitable consequence of aerobic metabolism, and while these particular "reactive oxygen species" (ROSs) can exhibit a number of biological effects, they are not of themselves excessively reactive and thus they are not especially damaging at physiological concentrations. However, their reactions with poorly liganded iron species can lead to the catalytic production of the very reactive and dangerous hydroxyl radical, which is exceptionally damaging, and a major cause of chronic inflammation. We review the considerable and wide-ranging evidence for the involvement of this combination of (su)peroxide and poorly liganded iron in a large number of physiological and indeed pathological processes and inflammatory disorders, especially those involving the progressive degradation of cellular and organismal performance. These diseases share a great many similarities and thus might be considered to have a common cause (i.e. iron-catalysed free radical and especially hydroxyl radical generation). The studies reviewed include those focused on a series of cardiovascular, metabolic and neurological diseases, where iron can be found at the sites of plaques and lesions, as well as studies showing the significance of iron to aging and longevity. The effective chelation of iron by natural or synthetic ligands is thus of major physiological (and potentially therapeutic) importance. As systems properties, we need to recognise that physiological observables have multiple molecular causes, and studying them in isolation leads to inconsistent patterns of apparent causality when it is the simultaneous combination of multiple factors that is responsible. This explains, for instance, the decidedly mixed effects of antioxidants that have been observed, etc...Comment: 159 pages, including 9 Figs and 2184 reference

Effects of Build Orientation on Tensile Strength for Stereolithography-Manufactured ASTM D-638 Type I Specimens

A statistical design of experiments (DOE) approach was used to determine if specific build orientation parameters impacted mechanical strength of stereolithography (SL) fabricated parts. A single platform (25.4 × 25.4-cm cross-section) on the 3D Systems Viper si2 SL machine was designed to hold 18 ASTM D-638 type I samples manufactured in different orientations. The DOE tested three factors: axis, layout, and position. Samples were fabricated parallel with the x-axis or y-axis, or 45° to both axes (called axes 1, 2, and 3, respectively). For each axis, samples were fabricated either flat or on an edge relative to the x–y plane (called layouts 1 and 2, respectively). Three samples were manufactured for each layout and axis combination, and the samples were labeled as positions 1, 2, or 3 depending on the distance from the center of the platform with position 1 being the closest to the center. The results from the statistical analyses showed that axis and position had no significant effect on ultimate tensile stress (UTS) or modulus of elasticity in tension (E). However, layout (or whether a sample was built flat or on an edge) was shown to have a statistically significant effect on UTS and E (at a 95% level of confidence). The differences between average UTS and E for each of the samples built flat and on an edge were ~3.53% (43.2 versus 44.8 MPa) and ~4.59% (763.9 versus 800.7 MPa), respectively. Because of the relatively small differences in means for UTS and E, the statistical differences between layout most likely would not have been identified without performing the multifactor analysis of variance. Furthermore, layout was the only factor that tested different orientations of build layers (or layer-to-layer interfaces) with respect to the sample part, and thus, it appears that the orientation of the build layer (layer-to-layer interfaces) with respect to the fabricated part has a significant effect on the resulting mechanical properties. This study represents one of many to follow that is using statistical analyses to identify and classify important fabrication parameters on mechanical properties for layer-manufactured parts. Although SL is the focus of this work, the techniques developed and presented here can be applied to any layered manufacturing technology producing any ASTM-type specimen with any particular material