The M-Series Absorption Spectrum of Metallic Bismuth

Using a Siegbahn vacuum spectrometer and thin films of bismuth produced by sputtering, the wavelengths of the five x-ray M-absorption edges of bismuth 83 have been measured. For the edges M1 and M2, which had not previously been measured, the discrepancy between the computed and observed values is of the order of magnitude of experimental error while the usual large M4 and M5 discrepancies, first observed in this laboratory on other elements, are verified for bismuth. An interpretation of the large discrepancies between the experimental and computed wavelengths of the edges M4 and M5 based on experiments in other fields on the one hand and Block\u27s and Kronig\u27s wave-mechanical theory of energy levels in a crystal on the other is suggested. It is concluded that the M1 , M2 , and M3 electron in an absorption act go to the top of the filled free-electron levels while the M4 and M5 electrons go on out to higher energy levels of the crystal lattice

Studies of surface two-dimensional photonic band-gap structures

Two-dimensional (2D) surface photonic band-gap (SPBG) structures can be obtained by providing a shallow corrugation of the inner surface of a waveguide wall. It can be used as a distributed mirror, a cavity, or a filter in integrated optics or microwave electronics. These structures can also be an alternative to conventional 2D PBG or 1D Bragg structures. In this article, we present the results of theoretical and experimental studies of 2D SPBG structures. Data obtained from experiments are compared with theoretical results and good agreement between theory and experiment is demonstrated. Comparison of a coaxial 2D SPBG structure with a conventional 1D Bragg structure is also presented

Reusable Solid Rocket Motor - Accomplishment, Lessons, and a Culture of Success

The Reusable Solid Rocket Motor (RSRM) represents the largest solid rocket motor (SRM) ever flown and the only human-rated solid motor. High reliability of the RSRM has been the result of challenges addressed and lessons learned. Advancements have resulted by applying attention to process control, testing, and postflight through timely and thorough communication in dealing with all issues. A structured and disciplined approach was taken to identify and disposition all concerns. Careful consideration and application of alternate opinions was embraced. Focus was placed on process control, ground test programs, and postflight assessment. Process control is mandatory for an SRM, because an acceptance test of the delivered product is not feasible. The RSRM maintained both full-scale and subscale test articles, which enabled continuous improvement of design and evaluation of process control and material behavior. Additionally RSRM reliability was achieved through attention to detail in post flight assessment to observe any shift in performance. The postflight analysis and inspections provided invaluable reliability data as it enables observation of actual flight performance, most of which would not be available if the motors were not recovered. RSRM reusability offered unique opportunities to learn about the hardware. NASA is moving forward with the Space Launch System that incorporates propulsion systems that takes advantage of the heritage Shuttle and Ares solid motor programs. These unique challenges, features of the RSRM, materials and manufacturing issues, and design improvements will be discussed in the paper

Cylindrical, periodic surface lattice — theory, dispersion analysis, and experiment

A two-dimensional surface lattice of cylindrical topology obtained via perturbing the inner surface of a cylinder is considered. Periodic perturbations of the surface lead to observation of high-impedance, dielectric-like media and resonant coupling of surface and non-propagating volume fields. This allows synthesis of tailored-for-purpose "coating" material with dispersion suitable, for instance, to mediate a Cherenkov type interaction. An analytical model of the lattice is discussed and coupled-wave equations are derived. Variations of the lattice dispersive properties with variation of parameters are shown, illustrating the tailoring of the structure's electromagnetic properties. Experimental results are presented showing agreement with the theoretical model

Gyrotron experiments employing a field emission array cathode

The design and operation of a field emission array (FEA) cathode and the subsequent demonstration of the first FEA gyrotron are presented. Up to 10 mA from 30 000 tips was achieved reproducibly from each of ten chips in a gyrotron environment, namely, a vacuum 1 x 10(-8) mbar, -50 kV potential with multiple chip operation, The design parameters of the FEA gun were similar to those of a magnetron injection gun with an achievable electron beam current of 50-100 mA and measured power 720 W cw. Coherent microwave radiation was detected in both TE(02) at 30.1 GHz and TE(03) at 43.6 GHz, with a starting current of 1 mA

On the structure of non-full-rank perfect codes

The Krotov combining construction of perfect 1-error-correcting binary codes from 2000 and a theorem of Heden saying that every non-full-rank perfect 1-error-correcting binary code can be constructed by this combining construction is generalized to the $q$-ary case. Simply, every non-full-rank perfect code $C$ is the union of a well-defined family of $\mu$-components $K_\mu$, where $\mu$ belongs to an "outer" perfect code $C^*$, and these components are at distance three from each other. Components from distinct codes can thus freely be combined to obtain new perfect codes. The Phelps general product construction of perfect binary code from 1984 is generalized to obtain $\mu$-components, and new lower bounds on the number of perfect 1-error-correcting $q$-ary codes are presented.Comment: 8 page

Multi-mode coupling wave theory for helically corrugated waveguide

Helically corrugated waveguide has been used in various applications such as gyro-backward wave oscillators, gyro-traveling wave amplifier and microwave pulse compressor. A fast prediction of the dispersion characteristic of the operating eigenwave is very important when designing a helically corrugated waveguide. In this paper, multi-mode coupling wave equations were developed based on the perturbation method. This method was then used to analyze a five-fold helically corrugated waveguide used for X-band microwave compression. The calculated result from this analysis was found to be in excellent agreement with the results from numerical simulation using CST Microwave Studio and vector network analyzer measurements

Compact millimetre wave and terahertz radiation sources driven by pseudospark-generated electron beam

A pseudospark (PS) plasma sourced electron beam was both computationally and experimentally studied for generation of millimetre wave and terahertz radiation. The beam-wave interaction region is a sinusoidal rippled-wall slow wave structure of a backward wave oscillator (BWO) in G-band. An electron beam of ∼1 mm diameter carrying a current of up to 10 A with a sweeping voltage of 42 to 25 kV and pulse duration of 25 ns propagated through the interaction region in a plasma environment without the need for a guiding magnetic field, which resulted in broadband millimetre radiation generation over a frequency range of 186-202 GHz with a maximum power of 20 W

A cusp electron gun for millimeter wave gyrodevices

The experimental results of a thermionic cusp electron gun, to drive millimeter and submillimeter wave harmonic gyrodevices, are reported in this paper. Using a "smooth" magnetic field reversal formed by two coils this gun generated an annular-shaped, axis-encircling electron beam with 1.5 A current, and an adjustable velocity ratio alpha of up to 1.56 at a beam voltage of 40 kV. The beam cross-sectional shape and transported beam current were measured by a witness plate technique and Faraday cup, respectively. These measured results were found to be in excellent agreement with the simulated results using the three-dimensional code MAGIC