AWAKE: A proton-driven plasma wakefield acceleration experiment at CERN

The AWAKE Collaboration has been formed in order to demonstrate proton-driven plasma wakefield acceleration for the first time. This acceleration technique could lead to future colliders of high energy but of a much reduced length when compared to proposed linear accelerators. The CERN SPS proton beam in the CNGS facility will be injected into a 10 m plasma cell where the long proton bunches will be modulated into significantly shorter micro bunches. These micro-bunches will then initiate a strong wakefield in the plasma with peak fields above 1 GV/m that will be harnessed to accelerate a bunch of electrons from about 20 MeV to the GeV scale within a few meters. The experimental program is based on detailed numerical simulations of beam and plasma interactions. The main accelerator components, the experimental area and infrastructure required as well as the plasma cell and the diagnostic equipment are discussed in detail. First protons to the experiment are expected at the end of 2016 and this will be followed by an initial three-four years experimental program. The experiment will inform future larger-scale tests of proton-driven plasma wakefield acceleration and applications to high energy colliders.info:eu-repo/semantics/publishedVersio

AWAKE: A Proton-Driven Plasma Wakefield Acceleration Experiment at CERN

The AWAKE Collaboration has been formed in order to demonstrate proton-driven plasma wakefield acceleration for the first time. This acceleration technique could lead to future colliders of high energy but of a much reduced length when compared to proposed linear accelerators. The CERN SPS proton beam in the CNGS facility will be injected into a 10 m plasma cell where the long proton bunches will be modulated into significantly shorter micro-bunches. These micro-bunches will then initiate a strong wakefield in the plasma with peak fields above 1 GV/m that will be harnessed to accelerate a bunch of electrons from about 20 MeV to the GeV scale within a few meters. The experimental program is based on detailed numerical simulations of beam and plasma interactions. The main accelerator components, the experimental area and infrastructure required as well as the plasma cell and the diagnostic equipment are discussed in detail. First protons to the experiment are expected at the end of 2016 and this will be followed by an initial three-four years experimental program. The experiment will inform future larger-scale tests of proton-driven plasma wakefield acceleration and applications to high energy colliders

AWAKE, the advanced proton driven plasma wakefield acceleration experiment at CERN

The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) aims at studying plasma wakefield generation and electron acceleration driven by proton bunches. It is a proof-of-principle R&D experiment at CERN and the world׳s first proton driven plasma wakefield acceleration experiment. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV/c proton beam bunches from the SPS. The first experiments will focus on the self-modulation instability of the long (rms ~12 cm) proton bunch in the plasma. These experiments are planned for the end of 2016. Later, in 2017/2018, low energy (~15 MeV) electrons will be externally injected into the sample wakefields and be accelerated beyond 1 GeV. The main goals of the experiment will be summarized. A summary of the AWAKE design and construction status will be presented

Path to AWAKE : evolution of the concept

This paper describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability - a key to an early realization of the concept. This is then followed by the historical development of the experimental design, where the critical issues that arose and their solutions are described. We conclude with the design of the experiment as it is being realized at CERN and some words on the future outlook. A summary of the AWAKE design and construction status as presented in this conference is given in Gschwendtner et al. [1]

Calibration of a Bonner sphere spectrometer in quasi-monoenergetic neutron fields of 244 and 387 MeV.

This paper describes the results of calibration measurements for a Bonner sphere spectrometer (BSS) with 3He proportional counter performed in quasi-monoenergetic neutron fields at the Research Center for Nuclear Physics (RCNP) at the University of Osaka, Japan. Using 246 MeV and 389 MeV proton beams, neutron fields with nominal peak energies of 244 MeV and 387 MeV were generated via 7Li(p,n)7Be reactions. At high energies, the neutron spectra were measured by means of the time-of-flight (TOF) method. The low-energy part of the neutron spectra were determined by BSS measurements down to thermal energies using the MSANDB unfolding code and three different sets of response functions. These were obtained by means of Monte Carlo (MC) calculations including various codes and intra-nuclear cascade (INC) models. Unfolded BSS fluence rates were additionally confirmed by GEANT4 calculations. For calibration of the BSS, measured count rates were corrected for low-energy contributions and compared with count rates calculated using TOF data and various response functions. In addition, measured response values were compared with mono-energetic response calculations, and best agreement was found with GEANT4 results using the Bertini INC model

Neutron dosimetry in quasi-monoenergetic fields of 244 and 387 MeV.

This paper describes the results of neutron spectrometry and dose measurements using a Bonner Sphere Spectrometer (BSS) at the ring cyclotron facility of the Research Center for Nuclear Physics (RCNP), Osaka University, Japan. Quasi-monoenergetic neutron fields were generated using the Li-7(p, n)Be-7 reaction and 246 and 389 MeV protons. Neutrons produced at 0 degrees and 30 degrees emission angles were extracted into a time-of-flight (TOF) tunnel, and the energy spectra were measured at a distance of 35 m from the target. To deduce the corresponding neutron spectra from thermal to the nominal maximum energy, the BSS data were unfolded using the MSANDB code and response functions were calculated by Monte Carlo (MC) methods. These spectra are compared to spectral measurements using NE213 organic liquid scintillators applying the TOF method. The results are discussed in terms of ambient dose equivalent H*(10) and compared with the readings of other instruments operated during the experimen

Path to AWAKE: Evolution of the concept

This paper describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability - a key to an early realization of the concept. This is then followed by the historical development of the experimental design, where the critical issues that arose and their solutions are described. We conclude with the design of the experiment as it is being realized at CERN and some words on the future outlook. A summary of the AWAKE design and construction status as presented in this conference is given in Gschwendtner et al. [1]