2,093 research outputs found
Toughening of thermosetting polyimides
Work directed toward increasing the resistance to crack propagation of thermoset polyimides is described. Rubber modification and Teflon microfiber impregnation techniques for increasing fracture toughness are investigated. Unmodified Kerimid 601 has a fracture surface work value of 0.20 in-lbs/sq in. Dispersed particles of amine terminated butadiene acrylonitrile liquid rubber or of silicone rubber do not raise this value much. By contrast, 5 percent of well fibrillated Teflon produces an eight-fold increase in fracture toughness. Further process improvements should increase this factor to 20-30
Evidence for a Dayside Thermal Inversion and High Metallicity for the Hot Jupiter WASP-18b
We find evidence for a strong thermal inversion in the dayside atmosphere of
the highly irradiated hot Jupiter WASP-18b (T, )
based on emission spectroscopy from Hubble Space Telescope secondary eclipse
observations and Spitzer eclipse photometry. We demonstrate a lack of water
vapor in either absorption or emission at 1.4m. However, we infer emission
at 4.5m and absorption at 1.6m that we attribute to CO, as well as a
non-detection of all other relevant species (e.g., TiO, VO). The most probable
atmospheric retrieval solution indicates a C/O ratio of 1 and a high
metallicity (C/H= solar). The derived composition and
T/P profile suggest that WASP-18b is the first example of both a planet with a
non-oxide driven thermal inversion and a planet with an atmospheric metallicity
inconsistent with that predicted for Jupiter-mass planets at . Future
observations are necessary to confirm the unusual planetary properties implied
by these results
Required Sample Size to Detect Mediation in 3-Level Implementation Studies
Background: Statistical tests of mediation are important for advancing implementation science; however, little research has examined the sample sizes needed to detect mediation in 3-level designs (e.g., organization, provider, patient) that are common in implementation research. Using a generalizable Monte Carlo simulation method, this paper examines the sample sizes required to detect mediation in 3-level designs under a range of conditions plausible for implementation studies.
Method: Statistical power was estimated for 17,496 3-level mediation designs in which the independent variable (X) resided at the highest cluster level (e.g., organization), the mediator (M) resided at the intermediate nested level (e.g., provider), and the outcome (Y) resided at the lowest nested level (e.g., patient). Designs varied by sample size per level, intraclass correlation coefficients of M and Y, effect sizes of the two paths constituting the indirect (mediation) effect (i.e., X→M and M→Y), and size of the direct effect. Power estimates were generated for all designs using two statistical models—conventional linear multilevel modeling of manifest variables (MVM) and multilevel structural equation modeling (MSEM)—for both 1- and 2-sided hypothesis tests.
Results: For 2-sided tests, statistical power to detect mediation was sufficient (≥0.8) in only 463 designs (2.6%) estimated using MVM and 228 designs (1.3%) estimated using MSEM; the minimum number of highest-level units needed to achieve adequate power was 40; the minimum total sample size was 900 observations. For 1-sided tests, 808 designs (4.6%) estimated using MVM and 369 designs (2.1%) estimated using MSEM had adequate power; the minimum number of highest-level units was 20; the minimum total sample was 600. At least one large effect size for either the X→M or M→Y path was necessary to achieve adequate power across all conditions.
Conclusions: While our analysis has important limitations, results suggest many of the 3-level mediation designs that can realistically be conducted in implementation research lack statistical power to detect mediation of highest-level independent variables unless effect sizes are large and 40 or more highest-level units are enrolled. We suggest strategies to increase statistical power for multilevel mediation designs and innovations to improve the feasibility of mediation tests in implementation research
Flexible provisioning of Web service workflows
Web services promise to revolutionise the way computational resources and business processes are offered and invoked in open, distributed systems, such as the Internet. These services are described using machine-readable meta-data, which enables consumer applications to automatically discover and provision suitable services for their workflows at run-time. However, current approaches have typically assumed service descriptions are accurate and deterministic, and so have neglected to account for the fact that services in these open systems are inherently unreliable and uncertain. Specifically, network failures, software bugs and competition for services may regularly lead to execution delays or even service failures. To address this problem, the process of provisioning services needs to be performed in a more flexible manner than has so far been considered, in order to proactively deal with failures and to recover workflows that have partially failed. To this end, we devise and present a heuristic strategy that varies the provisioning of services according to their predicted performance. Using simulation, we then benchmark our algorithm and show that it leads to a 700% improvement in average utility, while successfully completing up to eight times as many workflows as approaches that do not consider service failures
A three dimensional dynamic study of electrostatic charging in materials
A description is given of the physical models employed in the NASCAP (NASA Charging Analyzer Program) code, and several test cases are presented. NASCAP dynamically simulates the charging of an object made of conducting segments which may be entirely or partially covered with thin dielectric films. The object may be subject to either ground test or space user-specified environments. The simulation alternately treats (1) the tendency of materials to accumulate and emit charge when subject to plasma environment, and (2) the consequent response of the charged particle environment to an object's electrostatic field. Parameterized formulations of the emission properties of materials subject to bombardment by electrons, protons, and sunlight are presented. Values of the parameters are suggested for clean aluminum, Al2O3, clean magnesium, MgO, SiO2 kapton, and teflon. A discussion of conductivity in thin dielectrics subject to radiation and high fields is given, together with a sample calculation
Particle Creation If a Cosmic String Snaps
We calculate the Bogolubov coefficients for a metric which describes the
snapping of a cosmic string. If we insist on a matching condition for all times
{\it and} a particle interpretation, we find no particle creation.Comment: 10 pages, MRC.PH.17/9
Zinc Finger Database (ZiFDB): a repository for information on C2H2 zinc fingers and engineered zinc-finger arrays
Zinc fingers are the most abundant DNA-binding motifs encoded by eukaryotic genomes and one of the best understood DNA-recognition domains. Each zinc finger typically binds a 3-nt target sequence, and it is possible to engineer zinc-finger arrays (ZFAs) that recognize extended DNA sequences by linking together individual zinc fingers. Engineered zinc-finger proteins have proven to be valuable tools for gene regulation and genome modification because they target specific sites in a genome. Here we describe ZiFDB (Zinc Finger Database; http://bindr.gdcb.iastate.edu/ZiFDB), a web-accessible resource that compiles information on individual zinc fingers and engineered ZFAs. To enhance its utility, ZiFDB is linked to the output from ZiFiT—a software package that assists biologists in finding sites within target genes for engineering zinc-finger proteins. For many molecular biologists, ZiFDB will be particularly valuable for determining if a given ZFA (or portion thereof) has previously been constructed and whether or not it has the requisite DNA-binding activity for their experiments. ZiFDB will also be a valuable resource for those scientists interested in better understanding how zinc-finger proteins recognize target DNA
Consumer confidence indices and stock markets’ meltdowns
Consumer confidence indices (CCIs) are a closely monitored barometer of countries’ economic health and an informative forecasting tool. Using European and US data, we provide a case study of the two recent stock market meltdowns (the post-dotcom bubble correction of 2000–2002 and the 2007–2009 decline at the beginning of the financial crisis) to contribute to the discussion on their appropriateness as proxies for stock markets’ investor sentiment. Investor sentiment should positively covary with stock market movements (DeLong, Shleifer, Summers, and Waldmann 1990); however, we find that the CCI–stock market relationship is not universally positive.We also do not find support for the information effect documented in the previous literature, but identify a more subtle relationship between consumer expectations about future household finances and stock market fluctuations
Recommended from our members
The effect of videokeratoscope faceplate design on radius of curvature maps
A computer model using finite ray tracing methods was developed to simulate a videokeratoscope analysing an average cornea. Different faceplate designs were tested using five points in the faceplate subtending angles between 15 and 75 in 15 intervals at the corneal vertex. Image quality was assessed by adding the geometrical blurs of the 5 image points. Differences (error) between accurate sagittal radius of curvature and sagittal radius of curvature calculated by the van Saarloos algorithm were calculated for selected surfaces at the same corneal points. The calculations were repeated for the tangential radius of curvature. Differences equal or bigger than 0.02 mm were regarded as clinically significant. The surface that provided the sharpest image for an average cornea was a cylinder with the base 120 mm away from the corneal vertex and a diameter of 26 mm. Changing the faceplate design results in clinically significant differences for an average cornea
Balloon dilation of mitral stenosis in adult patients: Postmortem and percutaneous mitral valvuloplasty studies
Preliminary reports have documented the utility of percutaneous balloon valvuloplasty of the mitral valve in adult patients with mitral stenosis, but the mechanism of successful valve dilation and the effect of mitral valvuloplasty on cardiac performance have not been studied in detail. Accordingly, mitral valvuloplasty was performed in five postmortem specimens and in 18 adult patients with rheumatic mitral stenosis, using either one (25 mm) or two (18 and 20 mm) dilation balloons. Postmortem balloon dilation resulted in increased valve orifice area in all five postmortem specimens, secondary to separation of fused commissures and fracture of nodular calcium within the mitral leaflets. In no case did balloon dilation result in tearing of valve leaflets, disruption of the mitral ring or liberation of potentially embolic debris.Percutaneous mitral valvuloplasty in 18 patients with severe mitral stenosis (including 9 with a heavily calcified valve) resulted in an increase in cardiac output (4.3 ± 1.1 to 5.1 ± 1.5 liters/min, p < 0.01) and mitral valve area (0.9 ± 0.2 to 1.6 ± 0.4 cm2, p < 0.0001), and a decrease in mean mitral pressure gradient (15 ± 5 to 9 ± 4 mm Hg, p < 0.0001), pulmonary capillary wedge pressure (23 ± 7 to 18 ± 7 mm Hg, p < 0.0001) and mean pulmonary artery pressure (36 ± 12 to 33 ± 12 mm Hg, p < 0.01). Left ventriculography before and after valvuloplasty in 14 of the 18 patients showed a mild (≤1 +) increase in mitral regurgitation in five patients and no change in the remainder. Embolic phenomena were not observed in any patient.Serial radionuclide ventriculography showed an increase in left ventricular peak filling rate (2.20 ± 1.20 to 2.50 ± 1.20 end-diastolic volumes per second [EDV/s], p < 0.05). Serial echocardiography/phonocardiography showed improvement in mitral valve excursion (11 ± 6 to 14 ± 6 mm, p < 0.001), mitral EF slope (7 ± 4 to 13 ± 5, p < 0.001), left atrial diameter (5.7 ± 0.9 to 5.3 ± 0.8 cm, p < 0.001), S2-opening snap interval (0.07 ± 0.03 to 0.08 ± 0.02 second, p < 0.02) and mitral valve area (0.9 ± 0.2 to 1.5 ± 0.4 cm2, p < 0.0001). All patients were discharged from the hospital with de- creased symptoms after valvuloplasty.It is concluded that percutaneous mitral valvuloplasty can be performed in adult patients with mitral stenosis, including patients with calcific disease, and can result in significant improvement in valvular function. The mechanisms of successful dilation include commissural separation and fracture of nodular calcium
- …