2,061 research outputs found
Compositional variation during monogenetic volcano growth and its implications for magma supply to continental volcanic fields
Individual volcanoes of continental monogenetic volcanic fields are generally presumed to erupt single magma batches during brief eruptions. Nevertheless, in two unrelated volcanic fields (the Waipiata volcanic field, New Zealand, and the Miocene-Pliocene volcanic field in western Hungary), we have identified pronounced and systematic compositional differences among products of individual volcanoes. We infer that this indicates a two-stage process of magma supply for these volcanoes. Each volcano records: (1) intrusion of a basanitic parent magma to lower- to mid-crustal levels and its subsequent fractionation to form a tephritic residual melt;, (2) subsequent transection of this reservoir by a second batch of basanitic melt, with tephrite rising to the surface at the head of the propagating basanite dyke. Eruption at the surface then yields initial tephrite, typically erupted as pyroclasts, followed by eruption and shallow intrusion of basanite from deeper in the dyke. By analogy with similar tephrite-basanite eruptions along rift zones of intraplate ocean-island volcanoes, we infer that fractionation to tephrite would have required decades to centuries. We conclude that the two studied continental monogenetic volcanic fields demonstrate a consistent history of early magmatic injections that fail to reach the surface, followed by capture and partial eruption of their evolved residues in the course of separate and significantly later injections of basanite that extend to the surface and erupt. This systematic behaviour probably reflects the difficulty of bringing small volumes of dense, primitive magma to the surface from mantle source regions. Ascent through continental crust is aided by the presence in the dyke head of buoyant tephrite captured during transection of the earlier-emplaced melt bodies
Recommended from our members
Happy 40th birthday, Organization Studies! Looking back and looking ahead
Investigating uptake of N2O in agricultural soils using a high-precision dynamic chamber method
Uptake (or negative flux) of nitrous oxide (N2O)in agricultural soils is a controversial issue which has proved
difficult to investigate in the past due to constraints such
as instrumental precision and methodological uncertainties.
Using a recently developed high-precision quantum cascade
laser gas analyser combined with a closed dynamic chamber,
a well-defined detection limit of 4 Îźg N2O-N m could
be achieved for individual soil flux measurements. 1220 mea-
surements of N2O flux were made from a variety of UK
soils using this method, of which 115 indicated uptake by the soil (i.e. a negative flux in the micrometeorological sign convention). Only four of these apparently negative fluxes were greater than the detection limit of the method, which suggests that the vast majority of reported negative fluxes from such measurements are actually due to instrument noise. As such, we suggest that the bulk of negative N2O fluxes reported for agricultural fields are most likely due to limits in detection of a particular flux measurement methodology and not a result of microbiological activity consuming atmospheric N2O
Potential risks of induced seismicity from high volume hydraulic fracturing of shales in Northern Ireland
Hydraulic fracturing (HF) has made it possible to economically produce hydrocarbons directly
from lowâpermeability reservoirs such as shales by injecting high pressure fluids to create
fracture networks. However, over the last decade the number of observations of induced
earthquakes caused by HF operations around the world has increased as the shale gas industry
has developed. Data from the US and Canada suggest that on average around 1% of HF wells
can be linked to earthquakes with magnitudes of 3 or greater. Earthquakes of this size are large
enough to be felt by people. However, in some areas of the US and Canada the percentage of
wells associated with induced earthquakes is much higher (>30%). This variability is often
explained in terms of geological factors such as proximity to existing faults. In a small number of
cases, HF operations have triggered earthquakes large enough to cause potentially damaging
ground motions. Such earthquakes cannot be confidently predicted in advance of operations.
These observations suggest that the risk from induced seismicity during HF operations is not
negligible.
Earthquakes with magnitudes greater than around 2 result from slip on existing faults that is
triggered by stress changes caused by the injection of fluid during the HF process. The size of
the earthquake will depend on both the area of the ruptured part of the fault and the amount of
slip. Since such faults may extend outside the hydraulically fractured zone, the maximum
magnitude will be controlled by local geology and tectonics, not operational parameters such as
the amount of injected fluid. As a result, the maximum magnitude is highly uncertain.
Induced earthquakes have been observed in wide variety of geological settings and in areas
where there are relatively few tectonic earthquakes. In some areas, the resulting hazard from
induced earthquakes due to HF operations is significantly greater than the hazard from tectonic
earthquakes. As a result, the low hazard from tectonic earthquakes in Northern Ireland does not
guarantee that the hazard from induced seismicity will also be low.
Induced earthquakes are likely to be clustered in space and time around the locus of HF
operations. Hazard is likely to increase with the number of wells and will be highest during or
shortly after HF operations. Hazard may also be a function of total injected volume, with larger
injected volumes leading to more earthquakes and increasing the probability of larger events.
Operations that target shallow formations may pose a higher hazard, since for a given
magnitude, the intensity of ground motions at the surface will be greater. The potential for actual
damage depends on the intensity of motions and both the number and vulnerability of buildings
exposed to ground shaking. As a result, the risk of damage to buildings will be higher in densely
populated urban areas than in rural areas. Risk studies for the UK have shown that cosmetic
and minor structural damage may occur for earthquakes with magnitudes as low as 3.
Higher resolution geophysical data is needed to identify fault structures and depth to basement
in sedimentary basins with hydrocarbon potential in Northern Ireland in order to help mitigate
risk of induced seismicity from hydraulic fracturing. Improved regional seismic monitoring should
also be considered. Similarly, the present-day stress regime and stress state of faults in both
the Lough Allen and Rathlin basins is poorly known. Further work is needed to address this.
Current risk-mitigation strategies have had limited success. There may be insufficient data to
identify geological faults prior to operations and even where high resolution data are available,
there may still be hidden faults. Similarly, traffic light systems based on specific earthquake
magnitude thresholds have often failed. Statistical methods that relate the volume of injected
fluid or the injection rate to induced earthquake activity may allow useful probabilistic forecasts
in the future but may be associated with considerable uncertainties without calibration for local
conditions
Nitrous oxide emission sources from a mixed livestock farm
The primary aim of this study was to identify and compare the most significant sources of nitrous oxide (N2O) emissions from soils within a typical mixed livestock farm in Scotland. The farm area can be considered as representative of agricultural soils in this region where outdoor grazing forms an important part of the animal husbandry. A high temporal resolution dynamic chamber method was used to measure N2O fluxes from the featureless, general areas of the arable and pasture fields (general) and from those areas where large nitrogen additions are highly likely, such as animal feeding areas, manure heaps, animal barns (features). Individual N2O flux measurements varied by four orders of magnitude, with values ranging from â5.5 to 80,000 Îźg N2O-N mâ2 hâ1. The log-normal distribution of the fluxes required the use of more complex statistics to quantify uncertainty, including a Bayesian approach which provided a robust and transparent method for âupscalingâ i.e. translating small-scale observations to larger scales, with appropriate propagation of uncertainty. Mean N2O fluxes associated with the features were typically one to four orders of magnitude larger than those measured on the general areas of the arable and pasture fields. During warmer months, when widespread grazing takes place across the farm, the smaller N2O fluxes of the largest area source â the general field (99.7% of total area) â dominated the overall N2O emissions. The contribution from the features should still be considered important, given that up to 91% of the fluxes may come from only 0.3% of the area under certain conditions, especially in the colder winter months when manure heaps and animal barns continue to produce emissions while soils reach temperatures unfavourable for microbial activity (<5 °C)
Development of Alditol Acetate Derivatives for the Determination of 15N-Enriched Amino Sugars by Gas Chromatography-Combustion-Isotope Ratio Mass Spectrometry
Amino
sugars can be used as indices to evaluate the role of soil
microorganisms in active nitrogen (N) cycling in soil. This paper
details the assessment of the suitability of gas chromatographyâcombustionâisotope
ratio mass spectrometry (GCâCâIRMS) for the analysis
of <sup>15</sup>N-enriched amino sugars as alditol acetate derivatives
prior to application of a novel <sup>15</sup>N stable isotope probing
(SIP) approach to amino sugars. The efficient derivatization and cleanup
of alditol acetate derivatives for GC was achieved using commercially
available amino sugars, including glucosamine, mannosamine, galactosamine,
and muramic acid, as laboratory standards. A VF-23ms stationary phase
was found to produce optimal separations of all four compounds. The
structure of the alditol acetate derivatives was confirmed using gas
chromatography/mass spectrometry (GC/MS). For GCâCâIRMS
determinations, implementation of a two-point normalization confirmed
the optimal carrier gas flow rate to be 1.7 mL min<sup>â1</sup>. Linearity of δ<sup>15</sup>N value determinations up to δ<sup>15</sup>N<sub>t</sub> of 469 Âą 3.1â° (where δ<sup>15</sup>N<sub>t</sub> is the independently measured δ<sup>15</sup>N value) was confirmed when 30 nmol N was injected on-column, with
the direction of deviation from δ<sup>15</sup>N<sub>t</sub> at
low sample amount dependent on the <sup>15</sup>N abundance of the
analyte. Observed between- and within-run memory effects were significant
(<i>P</i> < 0.007) when a highly enriched standard (469
Âą 3.1â°) was run; therefore, analytical run order and variation
in <sup>15</sup>N enrichment of analytes within the same sample must
be considered. The investigated parameters have confirmed the isotopic
robustness of alditol acetate derivatives of amino sugars for the
GCâCâIRMS analysis of <sup>15</sup>N-enriched amino
sugars in terms of linearity over an enrichment range (natural abundance
to 469 Âą 3.1â°) with on-column analyte amount over 30 nmol
N
Nitrogen fertiliser interactions with urine deposit affect nitrous oxide emissions from grazed grasslands
Cattle excreta deposited on grazed pastures are responsible for one fifth of the global anthropogenic nitrous oxide (N2O) emissions. One of the key nitrogen (N) sources is urine deposited from grazing animals, which contributes to very large N loadings within small areas. The main objective of this plot study was to establish whether the application of N fertiliser and urine deposit from dairy cows synergistically interacts and thereby increases N2O emissions, and how such interaction is influenced by the timing of application. The combined application of fertiliser (calcium ammonium nitrate) and urine significantly increased the cumulative N2O emissions as well as the N2O emission factor (EF) from 0.35 to 0.74 % in spring and from 0.26 to 0.52 % in summer. By contrast, EFs were lower when only fertiliser (0.31 % in spring, 0.07 % in summer) or urine was applied (0.33 % in spring, 0.28 % in summer). In autumn, N2O emissions were larger than in other seasons and the emissions from the combined application were not statistically different to those from either the separately applied urine or N fertiliser (EF ranging from 0.72 to 0.83, p-value < 0.05). The absence of significant synergistic effect could be explained by weather conditions, particularly rainfall during the three days prior to and after application in autumn. This study implies that the interactive effects of N fertilisation and urine deposit, as well as the timing of the application on N2O emission need to be taken into account in greenhouse gas emission inventories
Scientists and public: is the information flow direction starting to change?
Over half of the population of the UK
own a smartphone, and about the same
number of people uses social media
such as Twitter. For the British Geological
Survey (BGS) this means millions of
potential reporters of real-time events
and in-the-field data capturers, creating
a new source of scientific information
that could help to better understand
and predict natural processes
- âŚ