7,570 research outputs found

    Three computer codes to read, plot and tabulate operational test-site recorded solar data

    Get PDF
    Computer programs used to process data that will be used in the evaluation of collector efficiency and solar system performance are described. The program, TAPFIL, reads data from an IBM 360 tape containing information (insolation, flowrates, temperatures, etc.) from 48 operational solar heating and cooling test sites. Two other programs, CHPLOT and WRTCNL, plot and tabulate the data from the direct access, unformatted TAPFIL file. The methodology of the programs, their inputs, and their outputs are described

    Understanding and utilization of Thematic Mapper and other remotely sensed data for vegetation monitoring

    Get PDF
    The TM Tasseled Cap transformation, which provides both a 50% reduction in data volume with little or no loss of important information and spectral features with direct physical association, is presented and discussed. Using both simulated and actual TM data, some important characteristics of vegetation and soils in this feature space are described, as are the effects of solar elevation angle and atmospheric haze. A preliminary spectral haze diagnostic feature, based on only simulated data, is also examined. The characteristics of the TM thermal band are discussed, as is a demonstration of the use of TM data in energy balance studies. Some characteristics of AVHRR data are described, as are the sensitivities to scene content of several LANDSAT-MSS preprocessing techniques

    The ROTSE-III Robotic Telescope System

    Get PDF
    The observation of a prompt optical flash from GRB990123 convincingly demonstrated the value of autonomous robotic telescope systems. Pursuing a program of rapid follow-up observations of gamma-ray bursts, the Robotic Optical Transient Search Experiment (ROTSE) has developed a next-generation instrument, ROTSE-III, that will continue the search for fast optical transients. The entire system was designed as an economical robotic facility to be installed at remote sites throughout the world. There are seven major system components: optics, optical tube assembly, CCD camera, telescope mount, enclosure, environmental sensing & protection and data acquisition. Each is described in turn in the hope that the techniques developed here will be useful in similar contexts elsewhere.Comment: 19 pages, including 4 figures. To be published in PASP in January, 2003. PASP Number IP02-11

    The GREAT triggerless total data readout method

    Get PDF
    Recoil decay tagging (RDT) is a very powerful method for the spectroscopy of exotic nuclei. RDT is a delayed coincidence technique between detectors usually at the target position and at the focal plane of a spectrometer. Such measurements are often limited by dead time. This paper describes a novel triggerless data acquisition method, which is being developed for the Gamma Recoil Electron Alpha Tagging (GREAT) spectrometer, that overcomes this limitation by virtually eliminating dead time. Our solution is a total data readout (TDR) method where all channels run independently and are associated in software to reconstruct events. The TDR method allows all the data from both target position and focal plane to be collected with practically no dead-time losses. Each data word is associated with a timestamp generated from a global 100-MHz clock. Events are then reconstructed in real time in the event builder using temporal and spatial associations defined by the physics of the experimen

    Electron impact excitation cross sections for allowed transitions in atoms

    Full text link
    We present a semiempirical Gaunt factor for widely used Van Regemorter formula [Astrophys. J. 136, 906 (1962)] for the case of allowed transitions in atoms with the LS coupling scheme. Cross sections calculated using this Gaunt factor agree with measured cross sections to within the experimental error.Comment: RevTeX, 3 pages, 10 PS figures, 2 PS tables, submitted to Phys. Rev.

    Leaf area index (LAI) of loblolly pine and emergent vegetation following a harvest. Trans

    Get PDF
    ABSTRACT. Forests provide goods and services to society and, often, refugia for plants and animals; forest managers utilize silviculture to provide ecosystem services and to create habitat. On the Coastal Plain of North Carolina, forest management objectives typically include wood fiber production but may also include the maintenance of environmental quality and, sometimes, species diversity. Silvicultural prescriptions alter stand structure and development trajectories by influencing the competitive interactions among plant species for site resources. Early site intervention may include nutrient additions and/or vegetation control; in coastal loblolly pine (Pinus taeda L.) stands, herbaceous and arborescent species can dominate the site leaf area index (LAI) for many years after a harvest (followed by planting). LAI is an important structural and functional component of a forest stand. Many eco‐hydrologic and water quality models do not accurately account for LAI as the process driver to evapotranspiration (ET), and thus they ignore the ecophysiological effects of LAI on site water balance and nutrient loading. We measured LAI of emergent vegetation following a harvest, mechanical site preparation, and then pine planting for a drained loblolly pine plantation in coastal North Carolina. For six years monthly, growing season estimates of LAI were obtained using a LI‐COR LAI 2000 Plant Canopy Analyzer (PCA) for control (D1), thinned (D3), and harvested (D2) watersheds. In this article, we present results from the D2 treatment. In D2, we “harvested ” all emergent vegetation in 18 randomly placed 1 m 2 clip plots for three growing seasons where we estimated LAI using species‐pooled estimates of specific leaf area and total leaf dry mass (i.e., LAICLIP); PCA measurements were recorded prior to clipping (LAIPCA). We als

    Application of Risk within Net Present Value Calculations for Government Projects

    Get PDF
    In January 2004, President Bush announced a new vision for space exploration. This included retirement of the current Space Shuttle fleet by 2010 and the development of new set of launch vehicles. The President's vision did not include significant increases in the NASA budget, so these development programs need to be cost conscious. Current trade study procedures address factors such as performance, reliability, safety, manufacturing, maintainability, operations, and costs. It would be desirable, however, to have increased insight into the cost factors behind each of the proposed system architectures. This paper reports on a set of component trade studies completed on the upper stage engine for the new launch vehicles. Increased insight into architecture costs was developed by including a Net Present Value (NPV) method and applying a set of associated risks to the base parametric cost data. The use of the NPV method along with the risks was found to add fidelity to the trade study and provide additional information to support the selection of a more robust design architecture

    Pharmacokinetics of intravenous sildenafil in children with palliated single ventricle heart defects: effect of elevated hepatic pressures

    Get PDF
    Abstract Aims Sildenafil is frequently prescribed to children with single ventricle heart defects. These children have unique hepatic physiology with elevated hepatic pressures, which may alter drug pharmacokinetics. We sought to determine the impact of hepatic pressure on sildenafil pharmacokinetics in children with single ventricle heart defects. Methods A population pharmacokinetic model was developed using data from 20 single ventricle children receiving single-dose intravenous sildenafil during cardiac catheterisation. Non-linear mixed effect modelling was used for model development, and covariate effects were evaluated based on estimated precision and clinical significance. Results The analysis included a median (range) of 4 (2–5) pharmacokinetic samples per child. The final structural model was a two-compartment model for sildenafil with a one-compartment model for des-methyl-sildenafil (active metabolite), with assumed 100% sildenafil to des-methyl-sildenafil conversion. Sildenafil clearance was unaffected by hepatic pressure (clearance=0.62 L/hour/kg); however, clearance of des-methyl-sildenafil (1.94×(hepatic pressure/9) −1.33 L/hour/kg) was predicted to decrease ~7-fold as hepatic pressure increased from 4 to 18 mmHg. Predicted drug exposure was increased by ~1.5-fold in subjects with hepatic pressures ⩾10 versus <10 mmHg (median area under the curve=533 versus 792 µg*h/L). Discussion Elevated hepatic pressure delays clearance of the sildenafil metabolite – des-methyl-sildenafil – and increases drug exposure. We speculate that this results from impaired biliary clearance. Hepatic pressure should be considered when prescribing sildenafil to children. These data demonstrate the importance of pharmacokinetic assessments in patients with unique cardiovascular physiology that may affect drug metabolism

    Quantitative micro-elastography: imaging of tissue elasticity using compression optical coherence elastography

    Get PDF
    Probing the mechanical properties of tissue on the microscale could aid in the identification of diseased tissues that are inadequately detected using palpation or current clinical imaging modalities, with potential to guide medical procedures such as the excision of breast tumours. Compression optical coherence elastography (OCE) maps tissue strain with microscale spatial resolution and can delineate microstructural features within breast tissues. However, without a measure of the locally applied stress, strain provides only a qualitative indication of mechanical properties. To overcome this limitation, we present quantitative micro-elastography, which combines compression OCE with a compliant stress sensor to image tissue elasticity. The sensor consists of a layer of translucent silicone with well-characterized stress-strain behaviour. The measured strain in the sensor is used to estimate the two-dimensional stress distribution applied to the sample surface. Elasticity is determined by dividing the stress by the strain in the sample. We show that quantification of elasticity can improve the ability of compression OCE to distinguish between tissues, thereby extending the potential for inter-sample comparison and longitudinal studies of tissue elasticity. We validate the technique using tissue-mimicking phantoms and demonstrate the ability to map elasticity of freshly excised malignant and benign human breast tissues.Kelsey M. Kennedy, Lixin Chin, Robert A. McLaughlin, Bruce Latham, Christobel M. Saunders, David D. Sampson and Brendan F. Kenned
    corecore