38 research outputs found
Recommended from our members
Error analysis for hybrid undulators
A general modeling framework is introduced that allows for the solution to magnetic field perturbations due to mechanical and magnetic tolerances in hybrid undulators. For example, both geometric pole errors and permanent magnet block geometry and strength errors can be considered. Of particular significance is the scaling of the various errors with variations in the gap of the device. In this work, the perturbation analysis is presented along with specific examples of errors found in hybrid undulators
Recommended from our members
Magnetic Alignment of Pulsed Solenoids Using the Pulsed Wire Method
A unique application of the pulsed-wire measurement method has been implemented for alignment of 2.5 T pulsed solenoid magnets. The magnetic axis measurement has been shown to have a resolution of better than 25 {micro}m. The accuracy of the technique allows for the identification of inherent field errors due to, for example, the winding layer transitions and the current leads. The alignment system is developed for the induction accelerator NDCX-II under construction at LBNL, an upgraded Neutralized Drift Compression experiment for research on warm dense matter and heavy ion fusion. Precise alignment is essential for NDCX-II, since the ion beam has a large energy spread associated with the rapid pulse compression such that misalignments lead to corkscrew deformation of the beam and reduced intensity at focus. The ability to align the magnetic axis of the pulsed solenoids to within 100 pm of the induction cell axis has been demonstrated
Recommended from our members
Status of the low emittance upgrade of the advanced light source
The Advanced Light Source is one of the earliest 3rd generation light sources. With an active upgrade program it has remained competitive over the years. The latest in a series of upgrades is a lattice upgrade project that was started in 2009. When it will be completed, the ALS will operate with a horizontal emittance of 2.2 nm and an effective emittance of 2.6 nm. Combined with the high current of 500 mA and the small vertical emittance the ALS already operates at, this upgrade will keep it competitive for years to come. This paper summarizes the status of the upgrade, including beam dynamics studies and lattice optimizations as well as the magnet design
Recommended from our members
Status of the ALS brightness upgrade
The Advanced Light Source (ALS) at Berkeley Lab while one of the earliest 3rdgeneration light sources remains one of the brightest sources for soft x-rays worldwide. Amultiyear upgrade of the ALS is currently under way, which includes new and replacementx-ray beamlines, a replacement of many of the original insertion devices and many upgradesto the accelerator. The accelerator upgrade that affects the ALS performance most directlyis the ALS brightness upgrade, which will reduce the horizontal emittance from 6.3 to 2.2nm (2.6 nm effective). This will result in a brightness increase by a factor of three forbendmagnet beamlines and at least a factor of two for insertion device beamlines. Magnetsfor this upgrade are currently in production and will be installed starting later thisyear. Copyright © 2012 by IEEE
Stress deficits in reward behaviour are associated with and replicated by dysregulated amygdala-nucleus accumbens pathway function in mice
Reduced reward interest/learning and reward-to-effort valuation are distinct, common symptoms in neuropsychiatric disorders for which chronic stress is a major aetiological factor. Glutamate neurons in basal amygdala (BA) project to various regions including nucleus accumbens (NAc). The BA-NAc neural pathway is activated by reward and aversion, with many neurons being monovalent. In adult male mice, chronic social stress (CSS) leads to reduced discriminative reward learning (DRL) associated with decreased BA-NAc activity, and to reduced reward-to-effort valuation (REV) associated, in contrast, with increased BA-NAc activity. Chronic tetanus toxin BA-NAc inhibition replicates the CSS-DRL effect and causes a mild REV reduction, whilst chronic DREADDs BA-NAc activation replicates the CSS effect on REV without affecting DRL. This study provides evidence that stress disruption of reward processing involves the BA-NAc neural pathway; the bi-directional effects implicate opposite activity changes in reward (learning) neurons and aversion (effort) neurons in the BA-NAc pathway following chronic stress
The Genetic Basis of Heterosis: Multiparental Quantitative Trait Loci Mapping Reveals Contrasted Levels of Apparent Overdominance Among Traits of Agronomical Interest in Maize (Zea mays L.)
Understanding the genetic bases underlying heterosis is a major issue in maize (Zea mays L.). We extended the North Carolina design III (NCIII) by using three populations of recombinant inbred lines derived from three parental lines belonging to different heterotic pools, crossed with each parental line to obtain nine families of hybrids. A total of 1253 hybrids were evaluated for grain moisture, silking date, plant height, and grain yield. Quantitative trait loci (QTL) mapping was carried out on the six families obtained from crosses to parental lines following the “classical” NCIII method and with a multiparental connected model on the global design, adding the three families obtained from crosses to the nonparental line. Results of the QTL detection highlighted that most of the QTL detected for grain yield displayed apparent overdominance effects and limited differences between heterozygous genotypes, whereas for grain moisture predominance of additive effects was observed. For plant height and silking date results were intermediate. Except for grain yield, most of the QTL identified showed significant additive-by-additive epistatic interactions. High correlation observed between heterosis and the heterozygosity of hybrids at markers confirms the complex genetic basis and the role of dominance in heterosis. An important proportion of QTL detected were located close to the centromeres. We hypothesized that the lower recombination in these regions favors the detection of (i) linked QTL in repulsion phase, leading to apparent overdominance for heterotic traits and (ii) linked QTL in coupling phase, reinforcing apparent additive effects of linked QTL for the other traits
Recommended from our members
Completion of the Brightness upgrade of the ALS
The Advanced Light Source (ALS) at Berkeley Lab remains one of the brightest sources for soft x-rays worldwide. A multiyear upgrade of the ALS is underway, which includes new and replacement x-ray beamlines, a replacement of many of the original insertion devices and many upgrades to the accelerator. The accelerator upgrade that affects the ALS performance most directly is the ALS brightness upgrade [1], which reduces the horizontal emittance from 6.3 to 2.0 nm (2.5 nm effective). Magnets for this upgrade were installed in late 2012 and early 2013 followed by user operation with the reduced emittance
Recommended from our members
Magnetic design of the advanced light source harmonic sextupoles
Forty-eight harmonic sextupole magnets with integrated dipole correctors and skew quadrupole coils will be introduced in the Advanced Light Source Storage Ring. These new magnets are required to allow the ALS to provide the 40 beamline users with higher photon beam brightness (factor of 2 or 3). Introducing new combined-function magnets in an existing storage ring is a challenge due to the limited space available and a balance had to be found between magnet performance and spatial constraints. Consequently four different magnet designs were required. The calculation and simulation results obtained for each design as well as the impact of the different design choices on the magnetic performance are developed in this paper. © 2002-2011 IEEE
Recommended from our members
A dispersion and pulse width correction algorithm for the pulsed wire method
The pulsed wire technique is an attractive option for the measurement of undulators where the measurement access is restricted due to, for example, narrow undulator gaps or cryogenic environments in the case of superconducting undulators. Using the pulsed wire technique, direct measurements of the first and second integrals of the magnetic field can be obtained. However, one of the main limitations of this technique is the error introduced by dispersive wave motion, due to the finite flexural rigidity of the wire. For the measurement of the first integral of the magnetic field, an error is also introduced by the use of a current pulse with finite pulse width. In this paper, a general solution is presented for dispersive wave motion in pulsed wire measurements. A method for the measurement of the dispersive wave speed is presented and demonstrated through experimental examples. An algorithm is derived which corrects the dispersion and finite pulse-width errors in the measurement of first magnetic field integrals and the dispersion error in the measurement of second magnetic field integrals. The effectiveness of the correction algorithms is demonstrated through experimental measurements, and the results are compared with Hall probe measurements on a short undulator. © 2013 Elsevier B.V