47,512 research outputs found
Symmetry protected fractional Chern insulators and fractional topological insulators
In this paper we construct fully symmetric wavefunctions for the
spin-polarized fractional Chern insulators (FCI) and time-reversal-invariant
fractional topological insulators (FTI) in two dimensions using the parton
approach. We show that the lattice symmetry gives rise to many different FCI
and FTI phases even with the same filling fraction (and the same
quantized Hall conductance in FCI case). They have different
symmetry-protected topological orders, which are characterized by different
projective symmetry groups. We mainly focus on FCI phases which are realized in
a partially filled band with Chern number one. The low-energy gauge groups of a
generic FCI wavefunctions can be either or
the discrete group , and in the latter case the associated low-energy
physics are described by Chern-Simons-Higgs theories. We use our construction
to compute the ground state degeneracy. Examples of FCI/FTI wavefunctions on
honeycomb lattice and checkerboard lattice are explicitly given. Possible
non-Abelian FCI phases which may be realized in a partially filled band with
Chern number two are discussed. Generic FTI wavefunctions in the absence of
spin conservation are also presented whose low-energy gauge groups can be
either or . The constructed wavefunctions
also set up the framework for future variational Monte Carlo simulations.Comment: 24 pages, 13 figures, published versio
Moduli and K\"ahler potential in fermionic strings
We study the problem of identifying the moduli fields in fermionic
four-dimensional string models. We deform a free-fermionic model by introducing
exactly marginal operators in the form of Abelian Thirring interactions on the
world-sheet, and show that their couplings correspond to the untwisted moduli
fields. We study the consequences of this method for simple free-fermionic
models which correspond to orbifolds and obtain their moduli
space and K\"ahler potential by symmetry arguments and by direct calculation of
string scattering amplitudes. We then generalize our analysis to more
complicated fermionic structures which arise in constructions of realistic
models corresponding to asymmetric orbifolds, and obtain the moduli space and
K\"ahler potential for this case. Finally we extend our analysis to the
untwisted matter sector and derive expressions for the full K\"ahler potential
to be used in phenomenological applications, and the target space duality
transformations of the corresponding untwisted matter fields.Comment: 27pp Latex text, no figs, CERN-TH.7259/94, CTP-TAMU-14/94 and
ACT-06/9
Predicting floods in a large karst river basin by coupling PERSIANN-CCS QPEs with a physically based distributed hydrological model
In general, there are no long-term meteorological or hydrological data available for karst river basins. The lack of rainfall data is a great challenge that hinders the development of hydrological models. Quantitative precipitation estimates (QPEs) based on weather satellites offer a potential method by which rainfall data in karst areas could be obtained. Furthermore, coupling QPEs with a distributed hydrological model has the potential to improve the precision of flood predictions in large karst watersheds. Estimating precipitation from remotely sensed information using an artificial neural network-cloud classification system (PERSIANN-CCS) is a type of QPE technology based on satellites that has achieved broad research results worldwide. However, only a few studies on PERSIANN-CCS QPEs have occurred in large karst basins, and the accuracy is generally poor in terms of practical applications. This paper studied the feasibility of coupling a fully physically based distributed hydrological model, i.e., the Liuxihe model, with PERSIANN-CCS QPEs for predicting floods in a large river basin, i.e., the Liujiang karst river basin, which has a watershed area of 58 270 km-2, in southern China. The model structure and function require further refinement to suit the karst basins. For instance, the sub-basins in this paper are divided into many karst hydrology response units (KHRUs) to ensure that the model structure is adequately refined for karst areas. In addition, the convergence of the underground runoff calculation method within the original Liuxihe model is changed to suit the karst water-bearing media, and the Muskingum routing method is used in the model to calculate the underground runoff in this study. Additionally, the epikarst zone, as a distinctive structure of the KHRU, is carefully considered in the model. The result of the QPEs shows that compared with the observed precipitation measured by a rain gauge, the distribution of precipitation predicted by the PERSIANN-CCS QPEs was very similar. However, the quantity of precipitation predicted by the PERSIANN-CCS QPEs was smaller. A post-processing method is proposed to revise the products of the PERSIANN-CCS QPEs. The karst flood simulation results show that coupling the post-processed PERSIANN-CCS QPEs with the Liuxihe model has a better performance relative to the result based on the initial PERSIANN-CCS QPEs. Moreover, the performance of the coupled model largely improves with parameter re-optimization via the post-processed PERSIANN-CCS QPEs. The average values of the six evaluation indices change as follows: the Nash-Sutcliffe coefficient increases by 14 %, the correlation coefficient increases by 15 %, the process relative error decreases by 8 %, the peak flow relative error decreases by 18 %, the water balance coefficient increases by 8 %, and the peak flow time error displays a 5 h decrease. Among these parameters, the peak flow relative error shows the greatest improvement; thus, these parameters are of page1506 the greatest concern for flood prediction. The rational flood simulation results from the coupled model provide a great practical application prospect for flood prediction in large karst river basins
The Role of Starburst-AGN composites in Luminous Infrared Galaxy Mergers: Insights from the New Optical Classification Scheme
We investigate the fraction of starbursts, starburst-AGN composites,
Seyferts, and LINERs as a function of infrared luminosity (L_IR) and merger
progress for ~500 infrared-selected galaxies. Using the new optical
classifications afforded by the extremely large data set of the Sloan Digital
Sky Survey, we find that the fraction of LINERs in IR-selected samples is rare
(< 5%) compared with other spectral types. The lack of strong infrared emission
in LINERs is consistent with recent optical studies suggesting that LINERs
contain AGN with lower accretion rates than in Seyfert galaxies. Most
previously classified infrared-luminous LINERs are classified as starburst-AGN
composite galaxies in the new scheme. Starburst-AGN composites appear to
"bridge" the spectral evolution from starburst to AGN in ULIRGs. The relative
strength of the AGN versus starburst activity shows a significant increase at
high infrared luminosity. In ULIRGs (L_IR >10^12 L_odot), starburst-AGN
composite galaxies dominate at early--intermediate stages of the merger, and
AGN galaxies dominate during the final merger stages. Our results are
consistent with models for IR-luminous galaxies where mergers of gas-rich
spirals fuel both starburst and AGN, and where the AGN becomes increasingly
dominant during the final merger stages of the most luminous infrared objects.Comment: 30 pages, 19 figures, 10 tables, ApJ accepte
Nanoscale austenite reversion through partitioning, segregation, and kinetic freezing: Example of a ductile 2 GPa Fe-Cr-C steel
Austenite reversion during tempering of a Fe-13.6Cr-0.44C (wt.%) martensite
results in an ultrahigh strength ferritic stainless steel with excellent
ductility. The austenite reversion mechanism is coupled to the kinetic freezing
of carbon during low-temperature partitioning at the interfaces between
martensite and retained austenite and to carbon segregation at
martensite-martensite grain boundaries. An advantage of austenite reversion is
its scalability, i.e., changing tempering time and temperature tailors the
desired strength-ductility profiles (e.g. tempering at 400{\deg}C for 1 min.
produces a 2 GPa ultimate tensile strength (UTS) and 14% elongation while 30
min. at 400{\deg}C results in a UTS of ~ 1.75 GPa with an elongation of 23%).
The austenite reversion process, carbide precipitation, and carbon segregation
have been characterized by XRD, EBSD, TEM, and atom probe tomography (APT) in
order to develop the structure-property relationships that control the
material's strength and ductility.Comment: in press Acta Materialia 201
Quantised orbital angular momentum transfer and magnetic dichroism in the interaction of electron vortices with matter
Following the very recent experimental realisation of electron vortices, we
consider their interaction with matter, in particular the transfer of orbital
angular momentum in the context of electron energy loss spectroscopy, and the
recently observed dichroism in thin film magnetised iron samples. We show here
that orbital angular momentum exchange does indeed occur between electron
vortices and the internal electronic-type motion, as well as center of mass
motion of atoms in the electric dipole approximation. This contrasts with the
case of optical vortices where such transfer only occurs in transitions
involving multipoles higher than the dipole. The physical basis of the observed
dichroism is explained
- …