36 research outputs found

    Timing of supplementation of selenium and isoflavones determines prostate cancer risk factor reduction in rats

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>High dietary intake of selenium or isoflavones reduces risk factors for prostate cancer. We tested whether combined supplementation of these two dietary components would reduce prostate cancer risk factors in rats more than supplementation of each component individually.</p> <p>Methods</p> <p>Male Noble rat pups were exposed from conception to diets containing an adequate (0.33–0.45 mg/kg diet) or high (3.33–3.45 mg/kg) concentration of selenium as Se-methylselenocysteine and a low (10 mg/kg) or high (600 mg/kg) level of isoflavones in a 2 × 2 factorial design. Pups consumed their respective diets until sacrifice at 35, 100, or 200 days. Male Noble rat breeders, whose exposure to the diets began after puberty, were sacrificed at 336 days. Rats were weighed biweekly. Blood was collected at the time of sacrifice and body fat and prostates were dissected and weighed. Serum levels of leptin, IGF-1, and testosterone were determined using ELISA kits. Serum levels of isoflavones were assayed by GC/MS. Liver activity of selenium-dependent glutathione peroxidase 1 was measured as an indicator of selenium status.</p> <p>Results</p> <p>Serum isoflavone concentrations were nearly 100-fold higher at 35 days of age (1187.1 vs. 14.4 ng/mL, mean ± SD) in pups fed the high vs. low isoflavone diets, and remained so at 100 and 200 days, and in breeders. There were no dietary differences in liver glutathione peroxidase activity in pups or breeders. High isoflavone intake significantly (p = 0.001–0.047) reduced body weight in rat pups from 35 days onward, but not in breeders. Body fat and leptin were likewise significantly reduced by high isoflavones in pups while effects in breeders were less pronounced but still significant. High intake of Se and isoflavones each decreased serum IGF-1 in pups at 100 and 200 days, but not in breeders. No consistent dietary effects were observed on serum testosterone or relative weights of prostates. In pups, the combination of high isoflavones and high selenium produced the lowest weight gain, the lowest serum leptin, and the lowest serum IGF-1 concentrations of all four diets.</p> <p>Conclusion</p> <p>Combined intake of high selenium and high isoflavones may achieve greater chemopreventive effects than either compound individually. The timing of supplementation may determine the significance of its effects.</p

    Timing of supplementation of selenium and isoflavones determines prostate cancer risk factor reduction in rats

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>High dietary intake of selenium or isoflavones reduces risk factors for prostate cancer. We tested whether combined supplementation of these two dietary components would reduce prostate cancer risk factors in rats more than supplementation of each component individually.</p> <p>Methods</p> <p>Male Noble rat pups were exposed from conception to diets containing an adequate (0.33–0.45 mg/kg diet) or high (3.33–3.45 mg/kg) concentration of selenium as Se-methylselenocysteine and a low (10 mg/kg) or high (600 mg/kg) level of isoflavones in a 2 × 2 factorial design. Pups consumed their respective diets until sacrifice at 35, 100, or 200 days. Male Noble rat breeders, whose exposure to the diets began after puberty, were sacrificed at 336 days. Rats were weighed biweekly. Blood was collected at the time of sacrifice and body fat and prostates were dissected and weighed. Serum levels of leptin, IGF-1, and testosterone were determined using ELISA kits. Serum levels of isoflavones were assayed by GC/MS. Liver activity of selenium-dependent glutathione peroxidase 1 was measured as an indicator of selenium status.</p> <p>Results</p> <p>Serum isoflavone concentrations were nearly 100-fold higher at 35 days of age (1187.1 vs. 14.4 ng/mL, mean ± SD) in pups fed the high vs. low isoflavone diets, and remained so at 100 and 200 days, and in breeders. There were no dietary differences in liver glutathione peroxidase activity in pups or breeders. High isoflavone intake significantly (p = 0.001–0.047) reduced body weight in rat pups from 35 days onward, but not in breeders. Body fat and leptin were likewise significantly reduced by high isoflavones in pups while effects in breeders were less pronounced but still significant. High intake of Se and isoflavones each decreased serum IGF-1 in pups at 100 and 200 days, but not in breeders. No consistent dietary effects were observed on serum testosterone or relative weights of prostates. In pups, the combination of high isoflavones and high selenium produced the lowest weight gain, the lowest serum leptin, and the lowest serum IGF-1 concentrations of all four diets.</p> <p>Conclusion</p> <p>Combined intake of high selenium and high isoflavones may achieve greater chemopreventive effects than either compound individually. The timing of supplementation may determine the significance of its effects.</p

    Eroding Potentiometers

    Get PDF
    Eroding potentiometers have been devised for measuring the time-dependent positions of char fronts advancing through layers of insulating material subject to intense heating from one side. In the original application, the material layers of interest are thermal insulators in rocket motors and the heat comes from firing of the motors, but the principle of operation is equally applicable to other insulating materials subject to intense heating (e.g., ablative fire-retardant materials). Measuring the thickness decrement of propellant (in hybrid motors in particular) is another possible application of this transducer. Telemetry informs mission control of the propellant left after each burn. An eroding potentiometer could be characterized, more precisely, as an eroding two-wire resistor. It includes a twisted pair of thin, insulated wires oriented along the thickness of, and embedded in, the layer of thermal-insulation material to be tested (see figure). The electrical insulation material on the wires should be one for which the charring temperature is about the same as (or perhaps slightly less than) that of the thermal- insulation material to be tested. In the original rocket-motor application, the wires have a diameter of 0.003 in. (.0.08 mm), are made of manganin, and are coated with polyimide for electrical insulation. Outside the thermal insulation on the cold side, the wire leads are connected to a Wheatstone bridge circuit for measurement of electrical resistance change

    The Effect of CardioWaves Interval Training on Resting Blood Pressure, Resting Heart Rate, and Mind-Body Wellness

    Get PDF
    International Journal of Exercise Science 9(1): 89-100, 2016. An experimental study to examine the effects of CardioWaves interval training (CWIT) and continuous training (CT) on resting blood pressure, resting heart rate, and mind-body wellness. Fifty-two normotensive (blood pressure \u3c120/80 mmHg), pre-hypertensive (120–139/80–89 mmHg), and hypertensive (\u3e140/90 mmHg) participants were randomly assigned and equally divided between the CWIT and CT groups. Both groups participated in the assigned exercise protocol 30 minutes per day, four days per week for eight weeks. Resting blood pressure, resting heart rate, and mind-body wellness were measured pre- and post-intervention. A total of 47 participants (15 females and 32 males) were included in the analysis. The CWIT group had a non-significant trend of reduced systolic blood pressure (SBP) and increased diastolic blood pressure (DBP) while the CT group had a statistically significant decrease in awake SBP (p = 0.01) and total SBP (p = 0.01) and a non-significant decrease in DBP. With both groups combined, the female participants had a statistically significant decrease in awake SBP (p = 0.002), asleep SBP (p = 0.01), total SBP (p = 0.003), awake DBP (p = 0.02), and total DBP (p = 0.05). The male participants had an increase in SBP and DBP with total DBP showing a statistically significant increase (p = 0.05). Neither group had a consistent change in resting heart rate. Both groups showed improved mind-body wellness. CWIT and CT reduced resting blood pressure, with CT having a greater effect. Resting heart rate did not change in either group. Additionally, both CWIT and CT improved mind-body wellness

    Osteoarthritis-Like Changes in Bardet–Biedl Syndrome Mutant Ciliopathy Mice (Bbs1M390R/M390R): Evidence for a Role of Primary Cilia in Cartilage Homeostasis and Regulation of Inflammation

    Get PDF
    Osteoarthritis (OA) is a debilitating inflammation related disease characterized by joint pain and effusion, loss of mobility, and deformity that may result in functional joint failure and significant impact on quality of life. Once thought of as a simple “wear and tear” disease, it is now widely recognized that OA has a considerable metabolic component and is related to chronic inflammation. Defects associated with primary cilia have been shown to be cause OA-like changes in Bardet–Biedl mice. We examined the role of dysfunctional primary cilia in OA in mice through the regulation of the previously identified degradative and pro-inflammatory molecular pathways common to OA. We observed an increase in the presence of pro-inflammatory markers TGFβ-1 and HTRA1 as well as cartilage destructive protease MMP-13 but a decrease in DDR-2. We observed a morphological difference in cartilage thickness in Bbs1M390R/M390R mice compared to wild type (WT). We did not observe any difference in OARSI or Mankin scores between WT and Bbs1M390R/M390R mice. Primary cilia appear to be involved in the upregulation of biomarkers, including pro-inflammatory markers common to OA

    Product consistency test round robin conducted by the Materials Characterization Center - Summary Report

    No full text
    The Savannah River Laboratory (SRL) Product Consistency Test (PCT) was developed as a short duration leach test that could be used to evaluate the consistency of Defense Waste Processing Facility (DWPF) glass. The goals were to develop a test that would be sensitive to glass composition and homogeneity, rapid enough to support quality control of the production process, and easily conducted remotely to facilitate working with highly radioactive materials. The long-term SRL goal is to show that the PCT can be used to demonstrate that DWPF glass meets the elemental and radionuclide release requirements of the Waste Acceptance Preliminary Specifications (WAPS). The Materials Characterization Center (MCC) at Pacific Northwest Laboratory (PNL) was requested by SRL to conduct a multi-laboratory round robin to evaluate the effectiveness of the PCT methodology. 12 figs., 10 tabs

    Development of a Low Data Event Timer for Monitoring an Advancing Crack in Fracture

    No full text
    Monitoring the crack position and velocity in a fracture specimen can be difficult and laborious. In addition, the data storage requirements can be considerable depending upon the testing conditions. A low data event timer was developed to alleviate these problems. The test apparatus was applied to cantilever beams bonded with a structural epoxy and tested under different conditions such as stable to unstable transitions and different temperature extremes. The results indicate that the approach eliminates problems associated with other types of crack measurement and greatly simplifies the measuring process

    Monitoring Seedling Emergence, Growth, and Survival Using Repeat High-Resolution Imagery

    No full text
    Environmental factors often limit plant establishment and survival through increased seedling mortality. Understanding plant growth and the causes of mortality can be helpful in developing solutions that enhance seeding success and improve restoration monitoring. The purpose of our research was to assess the efficacy of time lapse and motion sensing cameras for monitoring seedling height, density, and fate. We conducted this study in a salt desert shrub community in northwest Utah, USA. In spring 2017, we placed 28 cameras in fenced and unfenced plots seeded with bottlebrush squirreltail and collected hourly images of the seedlings’ development for the initial four months post-seeding. The seedling attributes were recorded in-field and compared with camera images to determine accuracy and reliability. We found that the optimal period for capturing imagery occurred near the sun’s zenith when shadows were minimized. We were able to detect both the timing of the plant emergence, plant height, density, growth rate, and seedling death. The average seedling height and density were underestimated by 14% and 30% between the camera and field estimates, respectively. We recognize that it could be beneficial to adjust for the effect of the date. The reduced seedling density improved the measurement accuracy through a lower visual obscurity. Managers can utilize remote cameras to effectively measure vegetation that can provide an insight into environmental influences
    corecore