Up scalable ITO free organic light emitting diodes based on embedded inkjet printed copper grids

We report on ITO-free OLEDS with a transparent hybrid Cu nanoparticle grid/PEDOT:PSS electrode processed in ambient conditions. An experimentally based methodology was implemented, where studies on alternative PEDOT:PSS derivatives and Cu grid design were performed, to gradually increase the efficiency of lab scale ITO-free OLEDs. To further increase electrode performance, inkjet-printed (IJP) Cu-grids are embedded to flatten the electrode, reduce leakage current and enhance homogeneity and efficiency. Finally, embedded Cu based ITO-free OLEDs showed current and power efficiencies comparable to reference ITO-based OLEDs. Methods to manufacture large area flat embedded IJP Cu-electrodes on glass and flexible substrates are presented and upscaling prospects of the proposed ITO-free electrode are discussed

Universal three-dimensional crosslinker for all-photopatterned electronics

All-solution processing of large-area organic electronics requires multiple steps of patterning and stacking of various device components. Here, we report the fabrication of highly integrated arrays of polymer thin-film transistors and logic gates entirely through a series of solution processes. The fabrication is done using a three-dimensional crosslinker in tetrahedral geometry containing four photocrosslinkable azide moieties, referred to as 4Bx. 4Bx can be mixed with a variety of solution-processable electronic materials (polymer semiconductors, polymer insulators, and metal nanoparticles) and generate crosslinked network under exposure to UV. Fully crosslinked network film can be formed even at an unprecedentedly small loading, which enables preserving the inherent electrical and structural characteristics of host material. Because the crosslinked electronic component layers are strongly resistant to chemical solvents, micropatterning the layers at high resolution as well as stacking the layers on top of each other by series of solution processing steps is possible

Crosslinking Super Yellow to produce super OLEDs Crosslinking with azides enables improved performance

An increasing number of organic light-emitting diodes (OLEDs) is nowadays based on the use of polymers as the emissive material. For this material class in particular, solution-processing of the OLEDs has gained traction in both research and industry. However, in order to access multilayer material systems, orthogonal solvents must be used to prevent dissolution of previously prepared layers. The use of crosslinkers can facilitate this production method by reducing the number of orthogonal solvents needed since insoluble networks are generated. In this work, a novel bisazide crosslinker is employed to insolubilize Super Yellow, a polyphenylene-vinylene emitter. This allows the use of an additional poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine electron blocking layer (EBL) from the same solvent. Devices including the blocking layer show improved efficacies compared to reference devices without the additional EBL, while also maintaining the emission spectrum. Using the upscalable technique of doctor blading, OLEDs were fabricated which showed a particularly noticeable effect of the blocking layer with a nearly twofold increase in luminance and a 56% increase in current efficacy.Peer Reviewe

High performance indium tin oxide-free solution-processed organic light emitting diodes based on inkjet-printed fine silver grid lines

Wereport on the grid design requirements and inkjet-printing processing conditions of well-defined silver nanoparticles combined with poly(3, 4-ethylenedioxylthiophene):poly(styrenesulfonate) PEDOT:PSS as indium tin oxide (ITO) replacement for ITO-free organic light emitting diodes (OLEDs). Solution-processed ITO-free OLEDs based on the 5BTF8 blend of poly(9, 9-dioctylfluorene-alt-benzothiadiazole(F8BT) and poly(9, 9-di-n-octylfluorenyl-2, 7-diyl) (PFO) light-emitting layers, processed in ambient conditions, showed comparable luminance efficiency and power efficiency values to reference devices based on ITO and near identical efficiencies at low luminance values

4H-1,2,6-Thiadiazin-4-one-containing small molecule donors and additive effects on their performance in solution-processed organic solar cells

The optical, electrochemical, morphological and transport properties of a series of thiadiazinone (acceptor) and (thienyl)carbazoles (donor) containing π-extended donor-acceptor-donors (D-A-D) are presented. Systematic variations in the number of the thienyl units, the choice of branched or straight alkyl side chains and the use of a processing additive demonstrate their use as electron donors in bulk heterojunction solar cells blended with fullerene acceptors. The best power conversion efficiency (PCE) of 2.7% is achieved by adding to the D-A-D 3:fullerene blend a polydimethylsiloxane (PDMS) additive, that improves the morphology and doubles the hole mobility within the D-A-D:fullerene blend