Effective Assessment Plan Leading to Strong Reform of Petroleum Engineering Graduate Program

The Bob L. Herd Department of Petroleum Engineering at Texas Tech University has made a lot of significant actions of improvement to its graduate program that was motivated by a systematic SACSCOC assessment plan. This paper shows how the SACSCOC assessment plan aided in making continuous actions of improvement and as a conclusion of these actions, how the current graduate curriculum plan was improved. This paper highlights the details of the graduate department assessment plan, such as how graduate program objectives are assessed, what assessment tools are used, when data are gathered and evaluated, and when actions of improvement are made. This paper will also detail how the analysis of data was utilized in making actions of continuous improvement. At the end of the paper examples of the significant actions of improvement made based on the department assessment and evaluation plan are presented.Cockrell School of Engineerin

The 1982 ASEE-NASA Faculty Fellowship program (Aeronautics and Research)

The NASA/ASEE Summer Faculty Fellowship Program (Aeronautics and Research) conducted at the NASA Goddard Space Flight Center during the summer of 1982 is described. Abstracts of the Final Reports submitted by the Fellows detailing the results of their research are also presented

Portable system for monitoring and controlling driver behavior and the use of a mobile phone while driving

There is an utmost requirement for technology to control a driver's phone while driving, which will prevent the driver from being distracted and thus saving the driver's and passenger;s lives. Information from recent studies has shown that 70% of the young and aware drivers are used to texting while driving. There are many different technologies used to control mobile phones while driving, including electronic device control, global positioning system (GPS), onboard diagnostics (OBD)-II-based devices, mobile phone applications or apps, etc. These devices acquire the vehicle information such as the car speed and use the information to control the driver's phone such as preventing them from making or receiving calls at specific speed limits. The information from the devices is interfaced via Bluetooth and can later be used to control mobile phone applications. The main aim of this paper is to propose the design of a portable system for monitoring the use of a mobile phone while driving and for controlling a driver's mobile phone, if necessary, when the vehicle reaches a specific speed limit (>10 km/h). A paperbased self-reported questionnaire survey was carried out among 600 teenage drivers from different nationalities to see the driving behavior of young drivers in Qatar. Finally, a mobile application was developed to monitor the mobile usage of a driver and an OBD-II module-based portable system was designed to acquire data from the vehicle to identify drivers' behavior with respect to phone usage, sudden lane changes, and abrupt breaking/sharp speeding. This information was used in a mobile application to control the driver's mobile usage as well as to report the driving behavior while driving. The application of such a system can significantly improve drivers' behavior all over the world.Author Contributions: Experiments were designed by A.K., M.C.; Experiments were performed by A.D.,M.M.; Results were analyzed by A.K.,M.C.,R.D.,N.E. and D.M.; All authors were involved in interpretation of data and paper writing. Funding: The publication of this article was funded by the Qatar National Library. Conflicts of Interest: The authors declare no conflict of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, or in the decision to publish the resultsScopu

Relationship between casting modulus and grain size in cast A356 aluminium alloys

Microstructure of Al-Si alloy castings depends most generally on melt preparation and on the cooling rate imposed by the thermal modulus of the component. In the case of Al-Si alloys, emphasis is put during melt preparation on refinement of pro-eutectic (Al) grains and on modification of the Al-Si eutectic. Thermal analysis has been used since long to check melt preparation before casting, i.e. by analysis of the cooling curve during solidification of a sample cast in an instrumented cup. The conclusions drawn from such analysis are however valid for the particular cooling conditions of the cups. It thus appeared of interest to investigate how these conclusions could extrapolate to predict microstructure in complicated cast parts showing local changes in the solidification conditions. For that purpose, thermal analysis cups and instrumented sand and die castings with different thermal moduli and thus cooling rates have been made, and the whole set of cooling curves thus recorded has been analysed. A statistical analysis of the characteristic features of the cooling curves related to grain refinement in sand and die castings allowed determining the most significant parameters and expressing the cube of grain size as a polynomial of these parameters. After introduction of a further parameter quantifying melt refining an excellent correlation, with a R2 factor of 0.99 was obtained

Feeding and Distribution of Porosity in Cast Al-Si Alloys as Function of Alloy Composition and Modification

Unmodified, Na-modified, and Sr-modified castings of Al-7 pct Si and Al-12.5 pct Si alloys were cast in molds in which it was possible to create different cooling conditions. It is shown how solidification influences the distribution of porosity at the surface and the center of the castings as a function of modification and Si content in sand- and chill-cast samples. Eutectic modification, Si content, and cooling conditions have a great impact on the distribution of porosity. Unmodified and Na-modified castings are more easily fed with porosity tending to congregate near the centerline of the casting, while Sr-modified castings solidify in a mushy manner that creates a more homogeneous distribution of porosity in the casting. The amount of porosity was highest in the Sr-modified alloys, lower in the Na-modified alloys, and lowest in the unmodified alloys. The size of the porosity-free layer and the effectiveness of the feeders were greater in the castings made with the steel chills due to the increased thermal gradients and consequent increase in the directionality of solidification

A Chemical Genetic Screen for Modulators of Asymmetrical 2,2′-Dimeric Naphthoquinones Cytotoxicity in Yeast

BACKGROUND: Dimeric naphthoquinones (BiQ) were originally synthesized as a new class of HIV integrase inhibitors but have shown integrase-independent cytotoxicity in acute lymphoblastic leukemia cell lines suggesting their use as potential anti-neoplastic agents. The mechanism of this cytotoxicity is unknown. In order to gain insight into the mode of action of binaphthoquinones we performed a systematic high-throughput screen in a yeast isogenic deletion mutant array for enhanced or suppressed growth in the presence of binaphthoquinones. METHODOLOGY/PRINCIPAL FINDINGS: Exposure of wild type yeast strains to various BiQs demonstrated inhibition of yeast growth with IC(50)s in the microM range. Drug sensitivity and resistance screens were performed by exposing arrays of a haploid yeast deletion mutant library to BiQs at concentrations near their IC(50). Sensitivity screens identified yeast with deletions affecting mitochondrial function and cellular respiration as having increased sensitivity to BiQs. Corresponding to this, wild type yeast grown in the absence of a fermentable carbon source were particularly sensitive to BiQs, and treatment with BiQs was shown to disrupt the mitochondrial membrane potential and lead to the generation of reactive oxygen species (ROS). Furthermore, baseline ROS production in BiQ sensitive mutant strains was increased compared to wild type and could be further augmented by the presence of BiQ. Screens for resistance to BiQ action identified the mitochondrial external NAD(P)H dehydrogenase, NDE1, as critical to BiQ toxicity and over-expression of this gene resulted in increased ROS production and increased sensitivity of wild type yeast to BiQ. CONCLUSIONS/SIGNIFICANCE: In yeast, binaphthoquinone cytotoxicity is likely mediated through NAD(P)H:quonine oxidoreductases leading to ROS production and dysfunctional mitochondria. Further studies are required to validate this mechanism in mammalian cells

Thoracoscopic-assisted repair of a bochdalek hernia in an adult: a case report

<p>Abstract</p> <p>Introduction</p> <p>Bochdalek hernia is a congenital defect of the diaphragm that usually presents in the neonatal period with life-threatening cardiorespiratory distress. It is rare for Bochdalek hernias to remain silent until adulthood. Once a Bochdalek hernia has been diagnosed, surgical treatment is necessary to avoid complications such as perforation and necrosis.</p> <p>Case presentation</p> <p>We present a 17-year-old Japanese boy with left-upper-quadrant pain for two months. Chest radiography showed an elevated left hemidiaphragm. Computed tomography revealed a congenital diaphragmatic hernia. The spleen and left colon had been displaced into the left thoracic cavity through a left posterior diaphragmatic defect. We diagnosed a Bochdalek hernia. Surgical treatment was performed via a thoracoscopic approach. The boy was placed in the reverse Trendelenburg position and intrathoracic pressure was increased by CO₂gas insufflations. This is a very useful procedure for reducing herniated contents and we were able to place the herniated organs safely back in the peritoneal cavity. The diaphragmatic defect was too large to close with thoracoscopic surgery alone. Small incision thoracotomy was required and primary closure was performed. His postoperative course was uneventful and there has been no recurrence of the diaphragmatic hernia to date.</p> <p>Conclusion</p> <p>Thoracoscopic surgery, performed with the boy in the reverse Trendelenburg position and using CO₂gas insufflations in the thoracic cavity, was shown to be useful for Bochdalek hernia repair.</p

Knowledge, attitude and practice of nuclear medicine staff towards radiation protection

Introduction: Ionizing radiation in medical imaging is one of the dominant sources of exposure, and correct knowledge of radiation protection, affects staff safety behaviors during procedures. This study aimed to assess the radiation protection Knowledge, Attitude and Practice (KAP) amongst nuclear medicine centers' staff in Iran. Methods: To evaluate the level of radiation protection KAP, a validated questionnaire was distributed between 243 participants considering demographic characteristics in different geographical regions in Iran from 2014 to 2015. Results: There were statistically significant differences in the level of nuclear medicine staff KAP radiation protection with gender (p0.05). Conclusion: Our findings have shown that radiation protection KAP level of nuclear medicine staff was inadequate in some regions. This might be due to the lack of continuous training and absence of adequate safety knowledge about ionizing radiation. It seems that awareness about radiation protection rules and regulations, along with continuous training and preparations has a direct effect on radiation practice leading to enhanced KAP of staff in nuclear medicine centers. © 2019 Tehran University of Medical Sciences. All rights reserved

Blended Antilock Braking System Control Method for All-Wheel Drive Electric Sport Utility Vehicle

At least two different actuators work in cooperation in regenerative braking for electric and hybrid vehicles. Torque blending is an important area, which is responsible for better manoeuvrability, reduced braking distance, improved riding comfort, etc. In this paper, a control method for electric vehicle blended antilock braking system based on fuzzy logic is promoted. The principle prioritizes usage of electric motor actuators to maximize recuperation energy during deceleration process. Moreover, for supreme efficiency it considers the batteryâs state of charge for switching between electric motor and conventional electrohydraulic brakes. To demonstrate the functionality of the controller under changing dynamic conditions, a hardware-in-the-loop simulation with real electrohydraulic brakes test bed is utilized. In particular, the experiment is designed to exceed the state-of-charge threshold during braking operation, what leads to immediate switch between regenerative and friction brake modes. Document type: Part of book or chapter of boo

Radiation protection knowledge, attitude, and practice (KAP) in interventional radiology

Objectives: Due to increasing cardiac disease and its mortality rate, the frequency of cardiac imaging has grown and, as a result, interventional cardiologists potentially receive high radiation doses in cardiac examinations. This study aimed to assess the knowledge, attitude, and practice (KAP) level of radiation protection (RP) among interventional radiology staff in Iranian health care centers across the country. Methods: We used a validated questionnaire survey consisting of 30 multiple-choice questions to perform a cross-sectional study. Participants were healthcare personnel working professionally with radiation at different levels (i.e., secretary, radiology technologists, nurse, and physician). The questionnaire was divided into three sections to assess KAP regarding RP. Results: Significant differences exist in RP KAP mean scores based on educational age (p 0.050). We found a significant difference between RP KAP mean scores and different regions (p < 0.050). Conclusions: Educational and practice age, sex, type of hospital, and geographical region affect he KAP of interventional radiology staff regarding RP. Since many of the subjective radiation harms for both medical team and patients, this can be easily controlled and prevented; a checkup for personnel of interventional radiology departments, considering samples from different parts of the country with different levels of education, continuous training, and practical courses may help map the status of KAP. The results of this study may also help authorized health physics officers design strategic plans to enhance the quality of such services in radiation departments. © 2018, Oman Medical Specialty Board. All rights reserved