333 research outputs found
A review of potential contaminants in Australian livestock feeds and proposed guidance levels for feed
Contaminants of man-made and natural origin need to be managed in livestock feeds to protect the health of livestock and that of human consumers of livestock products. This requires access to information on the transfer from feed to food to inform risk profiles and assessments, and to guide management interventions such as regulation or Hazard Analysis Critical Control Point approaches. This paper reviews contaminants of known and potential concern in the production of livestock feeds in Australia and compares existing but differing state and national regulatory standards with international standards. The contaminants considered include man-made organic chemical contaminants (e.g. legacy pesticides), elemental contaminants (e.g. arsenic, cadmium, lead), phytotoxins (e.g. gossypol) and mycotoxins (e.g. aflatoxins). Reference is made to scientific literature and evaluations by regulators to propose maximum levels that can be used for guidance by those involved in managing contamination incidents or developing feed safety programs. © 2013 CSIRO
Marine Rhodobacteraceae L-haloacid dehalogenase contains a novel His/Glu dyad that could activate the catalytic water.
Journal ArticleResearch Support, Non-U.S. Gov'tThe putative L-haloacid dehalogenase gene (DehRhb) from a marine Rhodobacteraceae family was cloned and overexpressed in Escherichia coli. The DehRhb protein was shown to be an L-haloacid dehalogenase with highest activity towards brominated substrates with short carbon chains (≤ C3). The optimal temperature for enzyme activity was 55 °C, and the Vmax and Km were 1.75 μm·min(-1) ·mg(-1) of protein and 6.72 mm, respectively, when using monobromoacetic acid as a substrate. DehRhb showed moderate thermal stability, with a melting temperature of 67 °C. The enzyme demonstrated high tolerance to solvents, as shown by thermal shift experiments and solvent incubation assays. The DehRhb protein was crystallized and structures of the native, reaction intermediate and substrate-bound forms were determined. The active site of DehRhb had significant differences from previously studied L-haloacid dehalogenases. The asparagine and arginine residues shown to be essential for catalytic activity in other L-haloacid dehalogenases are not present in DehRhb. The histidine residue which replaces the asparagine residue in DehRhb was coordinated by a conformationally strained glutamate residue that replaces a conserved glycine. The His/Glu dyad is positioned for deprotonation of the catalytic water which attacks the ester bond in the reaction intermediate. The catalytic water in DehRhb is shifted by ~ 1.5 Å from its position in other L-haloacid dehalogenases. A similar His/Glu or Asp dyad is known to activate the catalytic water in haloalkane dehalogenases. The DehRhb enzyme represents a novel member within the L-haloacid dehalogenase family and it has potential to be used as a commercial biocatalyst.Biotechnology and Biological Science Research CouncilUK and Aquapharm BiodiscoveryWellcome TrustEPSR
DFUNet: Convolutional Neural Networks for Diabetic Foot Ulcer Classification
Globally, in 2016, 1 out of 11 adults suffered from diabetes mellitus. Diabetic foot ulcers (DFU) are a major complication of this disease, which if not managed properly can lead to amputation. Current clinical approaches to DFU treatment rely on patient and clinician vigilance, which has significant limitations, such as the high cost involved in the diagnosis, treatment, and lengthy care of the DFU. We collected an extensive dataset of foot images, which contain DFU from different patients. In this DFU classification problem, we assessed the two classes as normal skin (healthy skin) and abnormal skin (DFU). In this paper, we have proposed the use of machine learning algorithms to extract the features for DFU and healthy skin patches to understand the differences in the computer vision perspective. This experiment is performed to evaluate the skin conditions of both classes that are at high risk of misclassification by computer vision algorithms. Furthermore, we used convolutional neural networks for the first time in this binary classification. We have proposed a novel convolutional neural network architecture, DFUNet, with better feature extraction to identify the feature differences between healthy skin and the DFU. Using 10-fold cross validation, DFUNet achieved an AUC score of 0.961. This outperformed both the traditional machine learning and deep learning classifiers we have tested. Here, we present the development of a novel and highly sensitive DFUNet for objectively detecting the presence of DFUs. This novel approach has the potential to deliver a paradigm shift in diabetic foot care among diabetic patients, which represent a cost-effective, remote, and convenient healthcare solution
Anaesthesia of three young grey seals (Halichoerus grypus) for fracture repair
Three young grey seals (Halichoerus grypus) were presented separately for fracture repair to the veterinary teaching hospital of University College Dublin. The seals were premedicated with a combination of pethidine, midazolam and atropine; anaesthesia was induced with propofol via the front flipper vein and maintained with sevoflurane or isoflurane in oxygen. One of the seals did not breathe spontaneously after anaesthesia; a cardiac arrest, resulting in death, occurred after several hours of mechanical ventilation. Post-mortem examination revealed a severe lungworm infestation and parasitic pneumonia in this animal. The two other seals recovered uneventfully from anaesthesia
The European Photon Imaging Camera on XMM-Newton: The MOS Cameras
The EPIC focal plane imaging spectrometers on XMM-Newton use CCDs to record
the images and spectra of celestial X-ray sources focused by the three X-ray
mirrors. There is one camera at the focus of each mirror; two of the cameras
contain seven MOS CCDs, while the third uses twelve PN CCDs, defining a
circular field of view of 30 arcmin diameter in each case. The CCDs were
specially developed for EPIC, and combine high quality imaging with spectral
resolution close to the Fano limit. A filter wheel carrying three kinds of
X-ray transparent light blocking filter, a fully closed, and a fully open
position, is fitted to each EPIC instrument. The CCDs are cooled passively and
are under full closed loop thermal control. A radio-active source is fitted for
internal calibration. Data are processed on-board to save telemetry by removing
cosmic ray tracks, and generating X-ray event files; a variety of different
instrument modes are available to increase the dynamic range of the instrument
and to enable fast timing. The instruments were calibrated using laboratory
X-ray beams, and synchrotron generated monochromatic X-ray beams before launch;
in-orbit calibration makes use of a variety of celestial X-ray targets. The
current calibration is better than 10% over the entire energy range of 0.2 to
10 keV. All three instruments survived launch and are performing nominally in
orbit. In particular full field-of-view coverage is available, all electronic
modes work, and the energy resolution is close to pre-launch values. Radiation
damage is well within pre-launch predictions and does not yet impact on the
energy resolution. The scientific results from EPIC amply fulfil pre-launch
expectations.Comment: 9 pages, 11 figures, accepted for publication in the A&A Special
Issue on XMM-Newto
Amine-reactive crosslinking enhances type 0 collagen hydrogel properties for regenerative medicine
IntroductionCollagen is extensively utilised in regenerative medicine due to its highly desirable properties. However, collagen is typically derived from mammalian sources, which poses several limitations, including high cost, potential risk of immunogenicity and transmission of infectious diseases, and ethical and religious constraints. Jellyfish-sourced type 0 collagen represents a safer and more environmentally sustainable alternative collagen source.MethodsThus, we investigated the potential of jellyfish collagen-based hydrogels, obtained from Rhizostoma pulmo (R. pulmo) jellyfish, to be utilised in regenerative medicine. A variety of R. pulmo collagen hydrogels (RpCol hydrogels) were formed by adding a range of chemical crosslinking agents and their physicochemical and biological properties were characterised to assess their suitability for regenerative medicine applications.Results and DiscussionThe characteristic chemical composition of RpCol was confirmed by Fourier-transform infrared spectroscopy (FTIR), and the degradation kinetics, morphological, and rheological properties of RpCol hydrogels were shown to be adaptable through the addition of specific chemical crosslinking agents. The endotoxin levels of RpCol were below the Food and Drug Administration (FDA) limit for medical devices, thus allowing the potential use of RpCol in vivo. 8-arm polyethylene glycol succinimidyl carboxyl methyl ester (PEG-SCM)-crosslinked RpCol hydrogels preserved the viability and induced a significant increase in the metabolic activity of immortalised human mesenchymal stem/stromal cells (TERT-hMSCs), therefore demonstrating their potential to be utilised in a wide range of regenerative medicine applications
- …