775 research outputs found

    Longitudinal dynamics of liquid filled elastic shells

    Get PDF
    Longitudinal dynamics of liquid filled elastic shells - interaction liquid and elastic tank, liquid surface instability, and bubble dynamic

    Study of liquid slosh in the tracking and data relay satellite hydrazine tanks

    Get PDF
    An experimental study was conducted to provide data for evaluation of the parameters for an analytical mechanical model representation of liquid/interface dynamics in the TDRSS propellant tanks. Models were developed for two liquid-under ullage (forward tank) configurations and for one liquid-over-ullage (aft tank) configuration. However, additional test runs were conducted with liquids of different densities in both cases to allow separation of bladder stiffness and gravity effects under various simulated steady acceleration conditions. Both static and dynamic parameters are evaluated to provide a good prediction of observed results

    Bubble dynamics in vibrated liquids under normal and simulated low gravity environments

    Get PDF
    Bubble dynamics in vibrated liquids under normal and simulated low gravity environment

    Prediction of payload vibration environments by mechanical admittance test techniques

    Get PDF
    A series of experiments was conducted with simple beam and mass launch vehicle and payload models in order to determine the validity of mechanical admittance/impedance techniques applied to development of improved payload vibration tests. Admittances and impedances were measured from tests of the individual components to form matrices which were combined analytically to allow prediction of responses for the complete system. Results were computed for a transmission matrix approach and an admittance matrix approach. Both a rigid body and a flexible payload model were considered. The results clearly demonstrate that the transmission matrix method is too sensitive to measurement error to be practical for this application, while the pure admittance matrix method produces quite satisfactory results. The effects of various errors on the final results are demonstrated

    Longitudinal vibration of ring stiffened cylindrical shells containing liquids Technical report no. 7

    Get PDF
    Longitudinal vibration of ring stiffened cylindrical shells containing liquids for application to liquid fueled space vehicle booster

    Dynamic stability and parametric resonance in cylindrical propellant tanks Final report

    Get PDF
    Dynamic stability and parametric resonance of longitudinally excited liquid propellant tank mode

    Prediction of shuttle vehicle damping from component test results

    Get PDF
    A dissipative energy approach for predicting the damping of four-component space shuttle model by means of modal parameters obtained from tests of the individual components is presented. A relationship between modal damping energy per cycle and peak strain (or kinetic) energy is first determined empirically from test data for each component. Undamped analytical models of each component are also developed, and combined into a system model from which are obtained modal kinetic (or strain) energies for its respective modes. These data are then used with the empirical damping curves to apportion the proper amount of damping energy to each component in a combined system mode, and thereby allow a prediction of damping ratio. Some discrepancies in results are noted to occur because of incomplete modeling of connecting link mechanisms and anomalies in modal responses

    A simulation study of active feedback supression of dynamic response in helicopter rotor blades

    Get PDF
    A parameter study is presented for active feedback control applied to a helicopter rotor blade during forward flight. The study was performed on an electromechanical apparatus which included a mechanical model rotor blade and electronic analog simulation of interaction between blade deflections and aerodynamic loading. Blade response parameters were obtained for simulated vortex impinging at the blade tip at one pulse per revolution, and for a pulse which traveled from the blade tip toward its root. Results show that the response in a 1 - 10-per-rev frequency band is diminished by the feedback action, but at the same time responses at frequencies above 10-per-rev become increasingly more prominent with increased feedback amplitude, and can even lead to instability at certain levels. It appears that the latter behavior results from limitations of the laboratory simulation apparatus, rather than genuine potential behavior for a prototype helicopter

    An experimental study of liquid surface oscillations in longitudinally excited compartmented cylindrical and spherical tanks

    Get PDF
    Liquid surface oscillations in longitudinally excited compartmented cylindrical and spherical tank

    Response of a cylindrical shell to random acoustic excitation Interim report

    Get PDF
    Dynamic response of cylindrical shell to random acoustic excitatio
    corecore