Exchange coupling induced antiferromagnetic-ferromagnetic transition in Pr0.5Ca0.5MnO3/La0.5Ca0.5MnO3Pr_{0.5}Ca_{0.5}MnO_3/La_{0.5}Ca_{0.5}MnO_3 superlattices

Superlattices built from two antiferromagnetic (AFM) charge/orbital order compounds, $Pr_{0.5}Ca_{0.5}MnO_3$ and $La_{0.5}Ca_{0.5}MnO_3$, have been studied as the thickness of $La_{0.5}Ca_{0.5}MnO_3$ ($LCMO$) varied. High structural quality thin films were obtained on $LaAlO_3$ substrates using the pulsed laser deposition technique. An antiferromagnetic-to-ferromagnetic transition, in addition to an enhancement of the coercivity, are observed as the $LCMO$ layer thickness increases. The small shift in the origin of the field-cooled hysteresis loop along the field axis indicates the presence of ferromagnetic and antiferromagnetic phases in the superlattices. We attribute these features to the AFM spin fluctuations at the $Pr_{0.5}Ca_{0.5}MnO_3/La_{0.5}Ca_{0.5}MnO_3$ interfaces resulting from the strain effects.Comment: To be published in Phys. Rev.

Fretting wear of Ti(CxNy) PVD coatings under variable environmental conditions

Fretting wear as a specific type of degradation is defined as an oscillatory motion at small amplitude between two nominally stationary solid bodies in mutual contact. Under external stresses the interface is being damaged by debris generation and its successive ejections outside the contact area. A potential protection against fretting damage by means of hard coatings is being offered by different surface engineering techniques. For this study TiC, TiN and TiCN hard coatings manufactured by a PVD method have been selected and tested against smooth polycrystalline alumina ball. A fretting test programme has been carried out at the frequency of 5Hz, 100N normal load, 100µm displacement amplitude and at three values of a relative humidity: 10, 50 and 90% at 295-298K temperature. It turned out that the intensity of wear process was depending not only on loading conditions but on environmental ones as well. A significant impact of RH on wear rate and friction behaviour of the coatings under investigation has been observed. Two different damage mechanisms have been identified and related to the phenomena of debris oxidation and debris adhesion to the counterbody surface. In the latter case the debris deposited onto the surface of the alumina ball lead to a change of stress distribution at the interface and as a result to accelerated wear. In this work experiments with variable relative humidity increasing from 10% to 90% within 1 a single fretting test have been completed. It follows from these experiments that there exists an intermediate value of the RH at which the friction coefficient changes rapidly. Finally a dissipated energy approach has been applied in the work in order to quantify and compare fretting wear rates of different hard coatings

Manipulating superconductivity through the domain structure of a ferromagnet: experimental aspects and theoretical implications

In the present work we study experimentally the influence that the domain structure of a fer- romagnet (FM) has on the properties of a superconductor (SC) in bilayers and multilayers of La0.60Ca0.40MnO3/Nb and FePt/Nb proximity hybrids. Specific experimental protocols that were employed in the performed magnetization measurements enabled us to directly uncover a generic property of FM/SC hybrids: in the absence of an external magnetic field, the multidomain struc- ture of the FM promotes the nucleation of superconductivity, while its monodomain state strongly suppresses it. Our experimental findings support recent theoretical studies proposing that when an inhomogeneous exchange field is offered by the FM to the SC the superconducting pairs are not susceptible to pair-breaking.Comment: 4 pages, 4 figure

The interparticle interaction and crossover in critical lines on field-temperature plane in Pr0.5_{0.5}Sr0.5_{0.5}MnO3_{3} nanoparticles

The magnetic properties and the effects of interparticle interaction on it have been studied in nanoparticles of half doped Pr$_{0.5}$Sr$_{0.5}$MnO$_{3}$. Three samples consisting of nanoparticles of different average particle sizes are synthesized to render the variation in interparticle interaction. Though all the samples crystallize in the same structure to that of their bulk compound, the low temperature ferromagnetic-antiferromagnetic transition, which is present in bulk compound, is not evident in the nanoparticles. Linear as well as nonlinear ac susceptibility coupled with dc magnetic measurements have shown the superparamagnetic behavior of these nanoparticles where the blocking temperature increases with the increasing particle size. Presence of interparticle interaction is confirmed from the temperature variation of coercive field and the analysis of frequency dependent ac susceptibility. We have identified the nature of this interaction to be of dipolar type, and show that its strength decreases with the increasing particle size. The effect of this dipolar interaction on magnetic properties is intriguing as the compounds exhibit crossover from de Almeida-Thouless to Gabay-Toulouse like critical lines on field-temperature plane above their respective interaction field. In agreement with theoretical prediction, we infer that this crossover is induced by the unidirectional anisotropy arising from interparticle interaction, and this is confirmed from the presence of exchange bias phenomenon.Comment: To appear in Phys. Rev.

Large Coercivity in Nanostructured Rare-earth-free MnxGa Films

The magnetic hysteresis of MnxGa films exhibit remarkably large coercive fields as high as 2.5 T when fabricated with nanoscale particles of a suitable size and orientation. This coercivity is an order of magnitude larger than in well-ordered epitaxial film counterparts and bulk materials. The enhanced coercivity is attributed to the combination of large magnetocrystalline anisotropy and ~ 50 nm size nanoparticles. The large coercivity is also replicated in the electrical properties through the anomalous Hall effect. The magnitude of the coercivity approaches that found in rare-earth magnets, making them attractive for rare-earth-free magnet applications

Quenching of lamellar ordering in an n-alkane embedded in nanopores

We present an X-ray diffraction study of the normale alkane nonadecane C_{19}H_{40} embedded in nanoporous Vycor glass. The confined molecular crystal accomplishes a close-packed structure by alignment of the rod-like molecules parallel to the pore axis while sacrificing one basic principle known from the bulk state, i.e. the lamellar ordering of the molecules. Despite this disorder, the phase transitions observed in the confined solid mimic the phase behavior of the 3D unconfined crystal, though enriched by the appearance of a true rotator phase known only from longer alkane chains.Comment: 7 pages, 3 figure

Micromagnetic simulations of sweep-rate dependent coercivity in perpendicular recording media

The results of micromagnetic simulations are presented which examine the impact of thermal fluctuations on sweep rate dependent coercivities of both single-layer and exchange-coupled-composite (ECC) perpendicular magnetic recording media. M-H loops are calculated at four temperatures and sweep rates spanning five decades with fields applied normal to the plane and at 45 degrees. The impact of interactions between grains is evaluated. The results indicate a significantly weaker sweep-rate dependence for ECC media suggesting more robustness to long-term thermal effects. Fitting the modeled results to Sharrock-like scaling proposed by Feng and Visscher [J. Appl. Phys. 95, 7043 (2004)] is successful only in the case of single-layer media with the field normal to the plane.Comment: 7 pages, 14 figure

Nanocrystallization and Amorphization Induced by Reactive Nitrogen Sputtering in Iron and Permalloy

Thin films of iron and permalloy Ni80Fe20 were prepared using an Ar+N2 mixture with magnetron sputtering technique at ambient temperature. The nitrogen partial pressure, during sputtering process was varied in the range of 0 to 100%, keeping the total gas flow at constant. At lower nitrogen pressures RN2<33% both Fe and NiFe, first form a nanocrystalline structure and an increase in nitrogen partail pressure results in formation of an amorphous structure. At intermediate nitrogen partial pressures, nitrides of Fe and NiFe were obtained while at even higher nitrogen partial pressures, nitrides themselves became nanocrystalline or amorphous. The surface, structural and magnetic properties of the deposited films were studied using x-ray reflection and diffraction, transmission electron microscopy, polarized neutron reflectivity and using a DC extraction magnetometer. The growth behavior for amorphous film was found different as compared with poly or nanocrystalline films. The soft-magnetic properties of FeN were improved on nanocrystallization while those of NiFeN were degraded. A mechanism inducing nanocrystallization and amorphization in Fe and NiFe due to reactive nitrogen sputtering is discussed in the present article.Comment: 13 Pages, 15 Figure

The Effect of Transfer Printing on Pentacene Thin-Film Crystal Structure

The thermal deposition and transfer Printing method had been used to produce pentacene thin-films on SiO2/Si and plastic substrates (PMMA and PVP), respectively. X-ray diffraction patterns of pentacene thin films showed reflections associated with highly ordered polycrystalline films and a coexistence of two polymorph phases classified by their d-spacing, d(001): 14.4 and 15.4 A.The dependence of the c-axis correlation length and the phase fraction on the film thickness and printing temperature were measured. A transition from the 15.4 A phase towards 14.4 A phase was also observed with increasing film thickness. An increase in the c-axis correlation length of approximately 12% ~16% was observed for Pn films transfer printed onto a PMMA coated PET substrate at 100~120 C as compared to as-grown Pn films on SiO2/Si substrates. The transfer printing method is shown to be an attractive for the fabrication of pentacene thin-film transistors on flexible substrates partly because of the resulting improvement in the quality of the pentacene film.Comment: 5 pages, 5 figure

Ultra-fast magnetisation rates within the Landau-Lifshitz-Bloch model

The ultra-fast magnetisation relaxation rates during the laser-induced magnetisation process are analyzed in terms of the Landau-Lifshitz-Bloch (LLB) equation for different values of spin $S$. The LLB equation is equivalent in the limit $S \rightarrow \infty$ to the atomistic Landau-Lifshitz-Gilbert (LLG) Langevin dynamics and for $S=1/2$ to the M3TM model [B. Koopmans, {\em et al.} Nature Mat. \textbf{9} (2010) 259]. Within the LLB model the ultra-fast demagnetisation time ($\tau_{M}$) and the transverse damping ($\alpha_{\perp}$) are parameterized by the intrinsic coupling-to-the-bath parameter $\lambda$, defined by microscopic spin-flip rate. We show that for the phonon-mediated Elliott-Yafet mechanism, $\lambda$ is proportional to the ratio between the non-equilibrium phonon and electron temperatures. We investigate the influence of the finite spin number and the scattering rate parameter $\lambda$ on the magnetisation relaxation rates. The relation between the fs demagnetisation rate and the LLG damping, provided by the LLB theory, is checked basing on the available experimental data. A good agreement is obtained for Ni, Co and Gd favoring the idea that the same intrinsic scattering process is acting on the femtosecond and nanosecond timescale.Comment: 9 pages, 7 figure