4,661 research outputs found
Acoustical modeling study of the open test section of the NASA Langley V/STOL wind tunnel
An acoustic model study was carried out to identify effective sound absorbing treatment of strategically located surfaces in an open wind tunnel test section. Also an aerodynamic study done concurrently, sought to find measures to control low frequency jet pulsations which occur when the tunnel is operated in its open test section configuration. The acoustical modeling study indicated that lining of the raised ceiling and the test section floor immediately below it, results in a substantial improvement. The aerodynamic model study indicated that: (1) the low frequency jet pulsations are most likely caused or maintained by coupling of aerodynamic and aeroacoustic phenomena in the closed tunnel circuit, (2) replacing the hard collector cowl with a geometrically identical but porous fiber metal surface of 100 mks rayls flow resistance does not result in any noticable reduction of the test section noise caused by the impingement of the turbulent flow on the cowl
United States Department of the Interior Geological Survey, Utah, Basic Data for Thermal Springs and Wells as Recorded in Geotherm
Performance optimization for rotors in hover and axial flight
Performance optimization for rotors in hover and axial flight is a topic of continuing importance to rotorcraft designers. The aim of this Phase 1 effort has been to demonstrate that a linear optimization algorithm could be coupled to an existing influence coefficient hover performance code. This code, dubbed EHPIC (Evaluation of Hover Performance using Influence Coefficients), uses a quasi-linear wake relaxation to solve for the rotor performance. The coupling was accomplished by expanding of the matrix of linearized influence coefficients in EHPIC to accommodate design variables and deriving new coefficients for linearized equations governing perturbations in power and thrust. These coefficients formed the input to a linear optimization analysis, which used the flow tangency conditions on the blade and in the wake to impose equality constraints on the expanded system of equations; user-specified inequality contraints were also employed to bound the changes in the design. It was found that this locally linearized analysis could be invoked to predict a design change that would produce a reduction in the power required by the rotor at constant thrust. Thus, an efficient search for improved versions of the baseline design can be carried out while retaining the accuracy inherent in a free wake/lifting surface performance analysis
Letter from D. L. Bliss to John Muir, 1899 Aug 29.
[1][letterhead]August 29th 1899John Muir EsqDear SirI am very anious to see you in regard to the Lake Tahoe Government Reservation and will be in San Francisco balance of this week. Will you be in the City between this time and Sunday or if not will you be at Martinez Sunday and can I see you there. Can arrange either way to [illegible] your convenience Will you kindly02612[2][letterhead]write me at #1208 Claus Spreckles Building and let me know where & when I can have an interview with you by so doing you will much obligedYours very trulyD.L. Bliss0261
Landing gear and cavity noise prediction
Prediction of airframe noise radiation from the landing gear and wheel wells of commercial aircraft is examined. Measurements of these components on typical aircraft are presented and potential noise sources identified. Semiempirical expressions for the sound generation by these sources are developed from available experimental data and theoretical analyses. These expressions are employed to estimate the noise radiation from the landing gear and wheel wells for a typical aircraft and to rank order the component sources
Unmasking the Active Galactic Nucleus in PKS J2310-437
PKS J2310-437 is an AGN with bright X-ray emission relative to its weak radio
emission and optical continuum. It is believed that its jet lies far enough
from the line of sight that it is not highly relativistically beamed. It thus
provides an extreme test of AGN models. We present new observations aimed at
refining the measurement of the source's properties. In optical photometry with
the NTT we measure a central excess with relatively steep spectrum lying above
the bright elliptical galaxy emission, and we associate the excess wholly or in
part with the AGN. A new full-track radio observation with the ATCA finds that
the core 8.64GHz emission has varied by about 20 per cent over 38 months, and
improves the mapping of the weak jet. With Chandra we measure a
well-constrained power-law spectral index for the X-ray core, uncontaminated by
extended emission from the cluster environment, with a negligible level of
intrinsic absorption. Weak X-ray emission from the resolved radio jet is also
measured. Our analysis suggests that the optical continuum in this radio galaxy
has varied by at least a factor of four over a timescale of about two years,
something that should be testable with further observations. We conclude that
the most likely explanation for the bright central X-ray emission is
synchrotron radiation from high-energy electrons.Comment: 7 pages, 12 figure
New limits for neutrinoless tau decays
Neutrinoless 3-prong tau lepton decays into a charged lepton and either two charged particles or one neutral meson have been searched for using 4.79 fb-1 of data collected with the CLEO II detector at Cornell Electron Storage Ring. This analysis represents an update of a previous study and the addition of six decay channels. In all channels the numbers of events found are compatible with background estimates and branching fraction upper limits are set for 28 different decay modes. These limits are either more stringent than those set previously or represent the first attempt to find these decays
Large area silicon sheet by EFG
Progress in a program to produce high speed, thin, wide silicon sheets for fabricating 10% efficient solar cells is reported. An EFG ribbon growth system was used to perform growth rate and ribbon thickness experiments. A new, wide ribbon growth system was developed. A theoretical study of stresses in ribbons was also conducted. The EFG ribbons were observed to exhibit a characteristic defect structure which is orientation dependent in the early stages of growth
- …