680 research outputs found
CLIC Background Studies and optimization of the innermost tracker elements
The harsh machine background at the Compact Linear Collider (CLIC) forms a
strong constraint on the design of the innermost part of the tracker. For the
CLIC Conceptual Design Report, the detector concepts developed for the
International Linear Collider (ILC) were adapted to the CLIC environment. We
present the new layout for the Vertex Detector and the Forward Tracking Disks
of the CLIC detector concepts, as well as the background levels in these
detectors. We also study the dependence of the background rates on technology
parameters like thickness of the active layer and detection threshold.Comment: 7 pages, 5 figures, LCWS 201
Design and standalone characterisation of a capacitively coupled HV-CMOS sensor chip for the CLIC vertex detector
The concept of capacitive coupling between sensors and readout chips is under
study for the vertex detector at the proposed high-energy CLIC electron
positron collider. The CLICpix Capacitively Coupled Pixel Detector (C3PD) is an
active High-Voltage CMOS sensor, designed to be capacitively coupled to the
CLICpix2 readout chip. The chip is implemented in a commercial nm HV-CMOS
process and contains a matrix of square pixels with m
pitch. First prototypes have been produced with a standard resistivity of
cm for the substrate and tested in standalone mode. The
results show a rise time of ns, charge gain of mV/ke and
e RMS noise for a power consumption of W/pixel. The
main design aspects, as well as standalone measurement results, are presented.Comment: 13 pages, 13 figures, 2 tables. Work carried out in the framework of
the CLICdp collaboratio
Combining TCAD and Monte Carlo methods to simulate CMOS pixel sensors with a small collection electrode using the Allpix framework
Combining electrostatic field simulations with Monte Carlo methods enables realistic modeling of the detector response for novel monolithic silicon detectors with strongly non-linear electric fields. Both the precise field description and the inclusion of Landau fluctuations and production of secondary particles in the sensor are crucial ingredients for the understanding and reproduction of detector characteristics.
In this paper, a CMOS pixel sensor with small collection electrode design, implemented in a high-resistivity epitaxial layer, is simulated by integrating a detailed electric field model from finite element TCAD into a Monte Carlo based simulation with the framework. The simulation results are compared to data recorded in test-beam measurements and very good agreement is found for various quantities such as cluster size, spatial resolution and efficiency. Furthermore, the observables are studied as a function of the intra-pixel incidence position to enable a detailed comparison with the detector behavior observed in data.
The validation of such simulations is fundamental for modeling the detector response and for predicting the performance of future prototype designs. Moreover, visualization plots extracted from the charge carrier drift model of the framework can aid in understanding the charge propagation behavior in different regions of the sensor
Pixel detector hybridisation with Anisotropic Conductive Films
Hybrid pixel detectors require a reliable and cost-effective interconnect
technology adapted to the pitch and die sizes of the respective applications.
During the ASIC and sensor R&D phase, and in general for small-scale
applications, such interconnect technologies need to be suitable for the
assembly of single-dies, typically available from Multi-Project-Wafer
submissions. Within the CERN EP R&D programme and the AIDAinnova collaboration,
innovative hybridisation concepts targeting vertex-detector applications at
future colliders are under development. This contribution presents recent
results of a newly developed in-house single-die interconnection process based
on Anisotropic Conductive Film (ACF). The ACF interconnect technology replaces
the solder bumps with conductive particles embedded in an adhesive film. The
electro-mechanical connection between the sensor and the read-out chip is
achieved via thermo-compression of the ACF using a flip-chip device bonder. A
specific pad topology is required to enable the connection via conductive
particles and create cavities into which excess epoxy can flow. This pixel-pad
topology is achieved with an in-house Electroless Nickel Immersion Gold (ENIG)
plating process that is also under development within the project. The ENIG and
ACF processes are qualified with the Timepix3 ASIC and sensors, with 55 um
pixel pitch and 14 um pad diameter. The ACF technology can also be used for
ASIC-PCB/FPC integration, replacing wire bonding or large-pitch solder bumping
techniques. This contribution introduces the ENIG plating and ACF processes and
presents recent results on Timepix3 hybrid assemblies
Performance evaluation of thin active-edge planar sensors for the CLIC vertex detector
Thin planar silicon sensors with a pitch of 55μm, active edge and various guard-ring layouts are investigated,using two-dimensional finite-element T-CAD simulations. The simulation results have been compared toexperimental data, and an overall good agreement is observed. It is demonstrated that the 50μm thick active-edge planar silicon sensors with floating guard-ring or without guard-ring can be operated fully efficiently upto the physical edge of the sensor. The simulation findings are used to identify suitable sensor designs forapplication in the high-precision vertex detector of the future CLIC linear ee collider
Upgrade of the Cold Electronics of the ATLAS HEC Calorimeter for sLHC
The signal amplification and summation electronics of the ATLAS Hadronic End-cap Calorimeter (HEC) is operated at the circumference of the HEC calorimeters inside the cryostats in liquid argon. The present electronics is designed to operate at irradiation levels expected for the LHC. For operation at the sLHC the irradiation levels are expected to be a factor 10 higher, therefore a new electronic system might be needed. The technological possibilities are investigated. From irradiation tests of the present HEC electronics it is known that it will operate up to a dose of 55 kGy of ionizing radiation and up to a neutron fluence of 3 * 10**14 n/cm**2, where it shows some degradation of performance. This matches well the requirements of up to 1.5 * 10**13 n/cm**2 for 10 years of LHC operation, including safety factors. For a subsequent sLHC running phase with 10 times higher expected irradiation levels, a more radiation hard HEC electronics will be needed. Therefore generic studies of different technologies have been carried out at the transistor level to understand the radiation hardness up to integrated neutron fluxes of ~2*10**16 n/cm**2 and the behaviour during operation at cryogenic temperatures. The S-parameter technique has been used to monitor the performance e.g. of gain and linearity during irradiation at room temperature. In addition, DC measurements before and after irradiation have been compared. Results of these tests and of accompanying noise tests are reported. In addition, results of S-parameter measurements will be reported operating the transistors in liquid nitrogen. Conclusions are drawn and the potential is assessed on the viability of using the tested technologies for carrying out the design of new HEC cold electronics for the sLHC
Design and Tests of the Silicon Sensors for the ZEUS Micro Vertex Detector
To fully exploit the HERA-II upgrade,the ZEUS experiment has installed a
Micro Vertex Detector (MVD) using n-type, single-sided, silicon micro-strip
sensors with capacitive charge division. The sensors have a readout pitch of
120 micrometers, with five intermediate strips (20 micrometer strip pitch). The
designs of the silicon sensors and of the test structures used to verify the
technological parameters, are presented. Results on the electrical measurements
are discussed. A total of 1123 sensors with three different geometries have
been produced by Hamamatsu Photonics K.K. Irradiation tests with reactor
neutrons and Co-60 photons have been performed for a small sample of sensors.
The results on neutron irradiation (with a fluence of 1 x 10^{13} 1 MeV
equivalent neutrons / cm^2) are well described by empirical formulae for bulk
damage. The Co-60 photons (with doses up to 2.9 kGy) show the presence of
generation currents in the SiO_2-Si interface, a large shift of the flatband
voltage and a decrease of the hole mobility.Comment: 33 pages, 25 figures, 3 tables, accepted for publication in NIM
Time resolution studies of Timepix3 assemblies with thin silicon pixel sensors
Timepix3 is a multi-purpose readout ASIC for hybrid pixel detectors. It can measure time and amplitude simultaneously by employing time-of-arrival (ToA) and time-over-threshold (ToT) techniques. Both methods are systematically affected by timewalk. In this paper, a method for pixel-by-pixel calibration of the time response is presented. Assemblies of Timepix3 ASICs bump-bonded to thin planar silicon pixel sensors with thicknesses of 50 μ m, 100 μ m and 150 μ m are calibrated and characterised in particle beams. For minimum ionising particles, time resolutions down to 0.72 ± 0.04 ns are achieved
Beam Test of Silicon Strip Sensors for the ZEUS Micro Vertex Detector
For the HERA upgrade, the ZEUS experiment has designed and installed a high
precision Micro Vertex Detector (MVD) using single sided micro-strip sensors
with capacitive charge division. The sensors have a readout pitch of 120
microns, with five intermediate strips (20 micron strip pitch). An extensive
test program has been carried out at the DESY-II testbeam facility. In this
paper we describe the setup developed to test the ZEUS MVD sensors and the
results obtained on both irradiated and non-irradiated single sided micro-strip
detectors with rectangular and trapezoidal geometries. The performances of the
sensors coupled to the readout electronics (HELIX chip, version 2.2) have been
studied in detail, achieving a good description by a Monte Carlo simulation.
Measurements of the position resolution as a function of the angle of incidence
are presented, focusing in particular on the comparison between standard and
newly developed reconstruction algorithms.Comment: 41 pages, 21 figures, 2 tables, accepted for publication in NIM
- …