CO2 gasification of chars prepared from wood and forest residue

The CO2 gasification of chars prepared from Norway spruce and its forest residue was investigated in a thermogravimetric analyzer (TGA) at slow heating rates. The volatile content of the samples was negligible; hence the gasification reaction step could be studied alone, without the disturbance of the devolatilization reactions. Six TGA experiments were carried out for each sample with three different temperature programs in 60 and 100% CO2. Linear, modulated, and constant-reaction rate (CRR) temperature programs were employed to increase the information content available for the modeling. The temperatures at half of the mass loss were lower in the CRR experiments than in the other experiments by around 120 degrees C. A relatively simple, well-known reaction kinetic equation described the experiments. The dependence on the reacted fraction as well as the dependence on the CO2, concentration were described by power functions (n-order reactions). The evaluations were also carried out by assuming a function of the reacted fraction that can mimic the various random pore/random capillary models. These attempts, however, did not result in an improved fit quality. Nearly identical activation energy values were obtained for the chars made from wood and forest residues (221 and 218 kJ/mol, respectively). Nevertheless, the forest residue char was more reactive; the temperatures at half of the mass loss showed 20-34 degrees C differences between the two chars at 10 degrees C/min heating rates. The assumption of a common activation energy, E, and a common reaction order, v, on the CO2, concentration for the two chars had only a negligible effect on the fit quality

Co-firing of biomass with coals Part 1. Thermogravimetric kinetic analysis of combustion of fir (abies bornmulleriana) wood

The chemical composition and reactivity of fir (Abies bornmulleriana) wood under non-isothermal thermogravimetric (TG) conditions were studied. Oxidation of the wood sample at temperatures near 600 A degrees C caused the loss of aliphatics from the structure of the wood and created a char heavily containing C-O functionalities and of highly aromatic character. On-line FTIR recordings of the combustion of wood indicated the oxidation of carbonaceous and hydrogen content of the wood and release of some hydrocarbons due to pyrolysis reactions that occurred during combustion of the wood. TG analysis was used to study combustion of fir wood. Non-isothermal TG data were used to evaluate the kinetics of the combustion of this carbonaceous material. The article reports application of Ozawa-Flynn-Wall model to deal with non-isothermal TG data for the evaluation of the activation energy corresponding to the combustion of the fir wood. The average activation energy related to fir wood combustion was 128.9 kJ/mol, and the average reaction order for the combustion of wood was calculated as 0.30

Leaching as a pretreatment process to complement torrefaction in improving co-firing characteristics of Jatropha curcas seed cake

The presence of certain inorganic elements in biomass causes issues such as slagging, fouling and corrosion when co-firing with coal for power generation. In this work, the efficacy of leaching to remove these elements from Jatropha curcas seed cake was investigated. Leaching of both untorrefied and torrefied seed cakes was carried out in Milli-Q water at temperatures of 20, 35 and 50 °C. At 20 °C, the two critical elements, potassium and chlorine, decreased by as much as 85 and 97 %, respectively. Leaching at higher temperatures was only beneficial for the more intensely torrefied biomass, since they were more resistant to leaching. The electrical conductivity and ion content of the leachates were measured, as were the inorganic elemental content, dry ash content, volatile matter content and higher heating value (HHV) of the solid seed cake. A secondary benefit of the leaching was an increase in the HHV by up to 10 %

Thermogravimetric and reaction kinetic analysis of biomass samples from an energy plantation

The products of a Hungarian experimental plantation for energy crops were investigated. Young shoots of poplar clones (Populus x euramericana and Populus x interamericana), black locust (Robinia pseudoacacia), willow (Salix alba), and an herbaceous plant (Miscanthus sinensis) revealed unexpectedly similar thermal behavior in inert and oxidative atmospheres, as well. An 8-fold difference in the level of grinding did not result in substantial differences in the thermal decomposition. The effect of oxygen in the ambient gas was studied at low sample masses (0.2-0.4 mg) that excluded the overheating due to the high reaction heat of the combustion process. The presence of oxygen affects the decomposition from ca. 220 degreesC. Nevertheless, the extrapolated onset temperature of the hemicellulose decomposition is practically the same at 0, 5, and 21 V/V% oxygen. A group of 12 experiments, representing two grinding levels, three plant genera and four different heating programs were evaluated simultaneously by the method of least squares employing the model of independent pseudocomponents. All evaluated experiments were well described by the same set of kinetic parameters; only the parameters describing the peak area of the partial processes differed. A technique was recommended for the appropriate handling of the nonrandom errors in the simultaneous evaluation of experiment series

Thermogravimetric analysis studies of low rank coals and modelling of combustion and gasification processes in entrained systems

In 2 vols.SIGLEAvailable from British Library Document Supply Centre-DSC:D196975 / BLDSC - British Library Document Supply CentreGBUnited Kingdo