178 research outputs found
Einsatz von gekeimtem Getreide in der Geflügelfütterung
Ab August 2005 muss die Bio-Geflügelfütterung laut EU-Bio-Verordnung (1804/1999/EG) zu 100 % mit ökologisch erzeugten Komponenten erfolgen. Für die Rationsgestaltung fallen hochwertige, konventionell erzeugte Eiweißträger weg. Es wurde geprüft, inwieweit gekeimter Weizen in 100 % Bio-Rationen zur Proteinversorgung von Küken, Jung- und Legehennen beitragen kann und ob diese Rationen bedarfsgerecht sind.
In zehn Bodenhaltungs-Stallabteilen ohne Außenauslauf wurden jeweils 19 Hennen und ein Hahn zweier Herkünfte (Lohmann Tradition –LT-, ISA Brown) vom Schlupf bis zur 40. Lebenswoche (LW) bei einer Besatzdichte von 5 Tieren/qm (ab der 5. LW) gehalten. Acht Versuchsgruppen wurden kombiniert mit 100 % Bio-Ergänzer und Weizenkeimen (4 Gruppen) oder -körnern (4 Gruppen) gefüttert, zwei Kontrollgruppen mit Alleinfutter mit bis zu 15 % konventionellen Komponenten.
Die 48-stündige Keimung des Weizens führte zu keinen Änderungen in den Gehalten der Rohnährstoffe, außer Stärke und Zucker, und damit auch zu keiner Verbesserung der Proteinversorgung der Tiere. Einige Vitamingehalte (B1, B2, K, C) und der Gehalt der essentiellen Linolensäure stiegen an.
Es gab keine signifikanten Unterschiede zwischen den Futtergruppen (Keim-, Körner und Alleinfütterung) und Herkünften in der Legeleistung, verschiedenen Eiqualitätsparametern und im Gefiederzustand, außer einer Tendenz zu höheren Eigewichten in der Keimfütterungsgruppe und höheren Lebendgewichten der LT-Hennen in der 14. und 21. LW.
Unter den gegebenen Bedingungen gewährleistete die 100 % Bio-Fütterung einen sehr guten Gesundheits- und Gefiederzustand der Tiere bei zufrieden stellenden Leistungen. Biophotonenmessungen ergaben signifikant höhere Dotter-Lumineszenz-Werte als bei zugekauften Eiern aus konventioneller Boden- und Käfighaltung. Lediglich die nochmals höheren Werte bei den Eiern der Kontrollgruppe deuteten möglicherweise darauf hin, dass die 100 % Bio-Fütterung weniger bedarfsgerecht war als die Fütterung mit Alleinfutter. Zudem bestanden beim 100 % Bio-Ergänzer ein hoher Futterverbrauch und eine höhere Futtervergeudung. Weitere Untersuchung zur Bestimmung des Nährstoffbedarfs von Jung- und Legehennen unter ökologischen Haltungsbedingungen sowie zur Entwicklung bedarfsgerechter ökologischer Futterrationen sind notwendig
Magnetic Field Effects on Plasma Plumes
Here, we will discuss our numerical studies of plasma jets and loops, of basic interest for plasma propulsion and plasma astrophysics. Space plasma propulsion systems require strong guiding magnetic fields known as magnetic nozzles to control plasma flow and produce thrust. Propulsion methods currently being developed that require magnetic nozzles include the VAriable Specific Impulse Magnetoplasma Rocket (VASIMR) [1] and magnetoplasmadynamic thrusters. Magnetic nozzles are functionally similar to de Laval nozzles, but are inherently more complex due to electromagnetic field interactions. The two crucial physical phenomenon are thrust production and plasma detachment. Thrust production encompasses the energy conversion within the nozzle and momentum transfer to a spacecraft. Plasma detachment through magnetic reconnection addresses the problem of the fluid separating efficiently from the magnetic field lines to produce maximum thrust. Plasma jets similar to those of VASIMR will be studied with particular interest in dual jet configurations, which begin as a plasma loops between two nozzles. This research strives to fulfill a need for computational study of these systems and should culminate with a greater understanding of the crucial physics of magnetic nozzles with dual jet plasma thrusters, as well as astrophysics problems such as magnetic reconnection and dynamics of coronal loops.[2] To study this problem a novel, hybrid kinetic theory and single fluid magnetohydrodynamic (MHD) solver known as the Magneto-Gas Kinetic Method is used.[3] The solver is comprised of a "hydrodynamic" portion based on the Gas Kinetic Method and a "magnetic" portion that accounts for the electromagnetic behaviour of the fluid through source terms based on the resistive MHD equations. This method is being further developed to include additional physics such as the Hall effect. Here, we will discuss the current level of code development, as well as numerical simulation result
Effects of segmented electrode in Hall current plasma thrusters
Segmented electrodes placed along a ceramic channel in a Hall thruster are shown to influence significantly the plasma potential distribution. Both the radial potential and the axial acceleration region are sensitive to the location of the segmented electrodes. The measured and theoretical potential profiles appear to be affected in detail by the electrode material (graphite) having lower secondary electron emission than the ceramic channel walls. The measured plasma potential profile is shown as well to correlate with the observed and desirable narrowing of the plasma plume emanating from the thruster. © 2002 American Institute of Physics.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/70788/2/JAPIAU-92-9-4906-1.pd
Recommended from our members
Plasma Characterization of Hall Thruster with Active and Passive Segmented Electrodes
Non-emissive electrodes and ceramic spacers placed along the Hall thruster channel are shown to affect the plasma potential distribution and the thruster operation. These effects are associated with physical properties of the electrode material and depend on the electrode configuration, geometry and the magnetic field distribution. An emissive segmented electrode was able to maintain thruster operation by supplying an additional electron flux to sustain the plasma discharge between the anode and cathode neutralizer. These results indicate the possibility of new configurations for segmented electrode Hall thruster
Recommended from our members
Investigations of Probe Induced Perturbations in a Hall Thruster
An electrostatic probe used to measure spatial plasma parameters in a Hall thruster generates perturbations of the plasma. These perturbations are examined by varying the probe material, penetration distance, residence time, and the nominal thruster conditions. The study leads us to recommendations for probe design and thruster operating conditions to reduce discharge perturbations, including metal shielding of the probe insulator and operation of the thruster at lower densities
Recommended from our members
Measurements of Plasma Potential Distribution in Segmented Electrode Hall Thruster
Use of a segmented electrode placed at the Hall thruster exit can substantially reduce the voltage potential drop in the fringing magnetic field outside the thruster channel. In this paper, we investigate the dependence of this effect on thruster operating conditions and segmented electrode configuration. A fast movable emissive probe is used to measure plasma potential in a 1 kW laboratory Hall thruster with semented electrodes made of a graphite material. Relatively small probe-induced perturbations of the thruster discharge in the vicinity of the thruster exit allow a reasonable comparison of the measured results for different thruster configurations. It is shown that the plasma potential distribution is almost not sensitive to changes of the electrode potential, but depends on the magnetic field distribution and the electrode placement
Recommended from our members
Electrostatic Probe with Shielded Probe Insulator Tube for Low Disturbing Plasma Measurements in Hall Thrusters
Electrostatic probes are widely used to measure spatial plasma parameters of the quasi-neutral plasma in Hall thrusters and similar ExB electric discharge devices. Significant perturbations of the plasma, induced by such probes, can mask the actual physics involved in operation of these devices. In Hall thrusters, probe-induced perturbations can produce changes in the discharge current and plasma parameters on the order of their steady state values. These perturbations are explored by varying the material, penetration distance, and residence time of various probe designs. A possible cause of these perturbations appears to be the secondary electron emission, induced by energetic plasma electrons, from insulator ceramic tubes in which the probe wire is inserted. A new probe in which a low secondary electron emission material, such as metal, shields the probe ceramic tube, is shown to function without producing such large perturbations. A segmentation of this shield further prevents probe -induced perturbations, by not shortening the plasma through the conductive shield. In a set of experiments with a segmented shield probe, the thruster was operated in the input power range of 500-2.5 kW and discharge voltages of 200-500 V, while the probe-induced perturbations of the discharge current were below 4% of its steady state value in the region in which 90% of the voltage drop takes place
Recommended from our members
Measurements of Secondary Electron Emission Effects in the Hall Thruster Discharge
The dependence of the maximum electron temperature on the discharge voltage is studied for two Hall thruster configurations, in which a collisionless plasma is bounded by channel walls made of materials with different secondary electron emission (SEE) properties. The linear growth of the temperature with the discharge voltage, observed in the channel with a low SEE yield, suggests that SEE is responsible for the electron temperature saturation in the thruster configuration with the channel walls having a higher SEE yield. The fact that the values of the electron temperature at saturation are rather high may indirectly support the recently predicted kinetic regime of the space charge saturation of the near-wall sheath in the thruster discharge. A correlation between the effects of the channel wall material on the electron temperature and the electron cross-field current was also observed
Recommended from our members
Operation of a Segmented Hall Thruster with Low-sputtering Carbon-velvet Electrodes
Carbon fiber velvet material provides exceptional sputtering resistance properties exceeding those for graphite and carbon composite materials. A 2 kW Hall thruster with segmented electrodes made of this material was operated in the discharge voltage range of 200–700 V. The arcing between the floating velvet electrodes and the plasma was visually observed, especially, during the initial conditioning time, which lasted for about 1 h. The comparison of voltage versus current and plume characteristics of the Hall thruster with and without segmented electrodes indicates that the magnetic insulation of the segmented thruster improves with the discharge voltage at a fixed magnetic field. The observations reported here also extend the regimes wherein the segmented Hall thruster can have a narrower plume than that of the conventional nonsegmented thruster
- …