Feasibility of estimation of surface air temperature from meteorological satellite data test plan

A conceptual system designed to estimate daily surface air temperatures utilizing radiometric data obtained from polar orbiting meteorological satellites is discussed in this memorandum. The Surface Air Temperature Estimation System is an outgrowth of previous developmental and operational systems. The system represents an effort to integrate both satellite and surface meteorological observations into an operational framework which would be usable worldwide

Anatomy of a bearing torque problem

In the early 1970s, an antenna despin drive was developed for MBB solar science satellite HELIOS. A problem with high bearing drag torque that was encountered on the two flight models of this drive, after successful tests were completed on twelve bearings, an engineering model, and the qualification unit is discussed

Slip ring experience in long duration space applications

Ball Aerospace experience with slip rings in space extends back to 1962. Over 40 multi-ring assemblies have been flown and continuous operating lifetimes greater than 8 years at up to 60 rpm have been demonstrated. Slip rings provide multi-channel transfer of electrical power and signals in assemblies that are small in size and weight, and low in cost. By use of multiple brushes and sufficient copper within the assembly, power transfer efficiency better than 99.95 percent for high voltage circuits can be achieved. A low slip ring failure rate based on actual space operation totalling billions of ring revolutions has been established. Well qualified suppliers who have been making slip rings for space use for over 25 years are available. It is hoped that the suspected problem in SEASAT will not be allowed to prejudice space system designer against these very useful mechanisms

Large Area Crop Inventory Experiment (LACIE). Experiment plan for evaluation of LANDSAT agronomic variables using wheat intensive test sites

There are no author-identified significant results in this report

Preliminary evaluation of the Environmental Research Institute of Michigan crop calendar shift algorithm for estimation of spring wheat development stage

An algorithm for estimating spectral crop calendar shifts of spring small grains was applied to 1978 spring wheat fields. The algorithm provides estimates of the date of peak spectral response by maximizing the cross correlation between a reference profile and the observed multitemporal pattern of Kauth-Thomas greenness for a field. A methodology was developed for estimation of crop development stage from the date of peak spectral response. Evaluation studies showed that the algorithm provided stable estimates with no geographical bias. Crop development stage estimates had a root mean square error near 10 days. The algorithm was recommended for comparative testing against other models which are candidates for use in AgRISTARS experiments

AgRISTARS: Foreign Commodity production forecasting. Project procedures designation and description document, volume 1

The crop estimation analysis procedures documentation of the AgRISTARS - Foreign Commodity Production Forecasting Project (FCPF) is presented. Specifically it includes the technical/management documentation of the remote sensing data analysis procedures prepared in accordance with the guidelines provided in the FCPF communication/documentation standards manual. Standard documentation sets are given arranged by procedural type and level then by crop types or other technically differentiating categories

AgRISTARS: Foreign commodity production forecasting. Project test reports document, volume 1

Foreign Commodity Production Forecasting testing activities through June 1981 are documented. A log of test reports is presented. Standard documentation sets are included for each test. The documentation elements presented in each set are summarized

Petrogenesis of calcic plagioclase megacrysts in Archean rocks

Anorthositic complexes with large equidimensional plagioclase grains of highly calcic composition occur in nearly all Archean cratons. Similar plagioclase occur as megacrysts in many Archean sills, dikes, and volcanic flows. In the Canadian Shield these units occur throughout the Archean portions of the entire shield and are particularly common as dikes over an area of a few 100,000 sq km in Ontario and Manitoba during a period of at least 100 m.y. in many different rock types and metamorphic grades. The plagioclase generally occurs in three modes: as inclusions in mafic intrusions at various stages of fractionation, as crystal segregations in anorthosite complexes, or as megacrysts in fractionated sills, dikes, and flows. Most occurrences suggest that the plagioclase was formed elsewhere before being transported to its present location. The evidence seems to be quite clear that occurrences of these types of calcic plagioclase require: (1) ponding of a relatively undifferentiated Archean tholeiitic melt at some depth; (2) isothermal crystallization of large, equidimensional homogeneous plagioclase crystals; (3) separation of the plagioclase crystals from any other crystalline phases; (4) further fractionation of melt; (5)transport of various combinations of individual plagioclase crystals and clusters of crystals by variously fractionated melts; and (6) emplacement as various types of igneous intrusions or flows

Archaean megacrystic plagioclase units and the tectonic setting of greenstones

Large (up to 20 cm), equidimensional, commonly euhedral, plagioclase megacrysts of highly calcic composition (An sub 80-90) occur commonly in all Archean cratons in one or more of three distinct associations: (1) as cumulate crystal segregations of anorthosite or as megacrysts in basaltic dikes, sills, and flows in greenstone belts that vary in metamorphic grade from greenschist to granulite. Throughout 100's of thousands of square kilometers of northwestern Ontario and Manitoba the plagioclase megacrysts occur in pillowed and massive flows, sills, dikes, large inclusions in dikes, and intrusive anorthositic complexes with areas of up to a few 100 sq km and spanning a period of at least 100 m.y. in the 2.7 to 2.8 b.y. time frame; (2) as basaltic dike swarms in stable cratonic areas forming parallel to subparallel patterns over hundreds of thousands of square kilometers intruding both granitic gneisses and supracrustal belts including greenstones. These swams include the Ameralik-Saglek system at 3.1 to 3.4 b.y., the Matachewan system at 2.5 to 2.6 b.y., and the Beartooth-Bighorn system at 2.2 to 2.3 b.y.; and, (3) as anorthositic complexes associated with marbles and quartzites (Sittampundi, India and Messina, South Africa) in granulite grade terrains. Initial attempts to correlate tectonic settings of similar modern crystbearing units with their Archean counterparts were only partially successful

Experience with duplex bearings in narrow angle oscillating applications

Duplex ball bearings are matched pairs on which the abutting faces of the rings have been accurately ground so that when the rings are clamped together, a controlled amount of interference (preload) exists across the balls. These bearings are vulnerable to radial temperature gradients, blocking in oscillation and increased sensitivity to contamination. These conditions decrease the service life of these bearings. It was decided that an accelerated thermal vacuum life test should be conducted. The test apparatus and results are described and the rationale is presented for reducing a multiyear life test on oil lubricated bearings to less than a year