422 research outputs found
Trimodal cloudiness and tropical stable layers in simulations of radiative convective equilibrium
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/95176/1/grl24304.pd
Decision support for using mobile rapid DNA analysis at the crime scene
Mobile Rapid DNA technology is close to being incorporated into crime scene investigations, with the potential to identify a perpetrator within hours. However, the use of these techniques entails the risk of losing the sample and potential evidence, because the device not only consumes the inserted sample, it is also is less sensitive than traditional technologies used in forensic laboratories. Scene of Crime Officers (SoCOs) therefore will face a ‘time/success rate trade-off’ issue when making a decision to apply this technology. In this study we designed and experimentally tested a Decision Support System (DSS) for the use of Rapid DNA technologies based on Rational Decision Theory (RDT). In a vignette study, where SoCOs had to decide on the use of a Rapid DNA analysis device, participating SoCOs were assigned to either the control group (making decisions under standard conditions), the Success Rate (SR) group (making decisions with additional information on DNA success rates of traces), or the DSS group (making decisions supported by introduction to RDT, including information on DNA success rates of traces). This study provides positive evidence that a systematic approach for decision-making on using Rapid DNA analysis assists SoCOs in the decision to use the rapid device. The results demonstrated that participants using a DSS made different and more transparent decisions on the use of Rapid DNA analysis when different case characteristics were explicitly considered. In the DSS group the decision to apply Rapid DNA analysis was influenced by the factors “time pressure” and “trace characteristics” like DNA success rates. In the SR group, the decisions depended solely on the trace characteristics and in the control group the decisions did not show any systematic differences on crime type or trace characteristic. Guiding complex decisions on the use of Rapid DNA analyses with a DSS could be an important step towards the use of these devices at the crime scene
Perspectives of carers on medication management in dementia:lessons from collaboratively developing a research proposal
Background: The need for carers to manage medication-related problems for people with dementia living in the community raises dilemmas, which can be identified by carers and people with dementia as key issues for developing carer-relevant research projects.A research planning Public Patient Involvement (PPI) workshop using adapted focus group methodology was held at the Alzheimer's Society's national office, involving carers of people with dementia who were current members of the Alzheimer's Society Research Network (ASRN) in dialogue with health professionals aimed to identify key issues in relation to medication management in dementia from the carer viewpoint. The group was facilitated by a specialist mental health pharmacist, using a topic guide developed systematically with carers, health professionals and researchers. Audio-recordings and field notes were made at the time and were transcribed and analysed thematically. The participants included nine carers in addition to academics, clinicians, and staff from DeNDRoN (Dementias and Neurodegenerative Diseases Research Network) and the Alzheimer's Society. Findings. Significant themes, for carers, which emerged from the workshop were related to: (1) medication usage and administration practicalities, (2) communication barriers and facilitators, (3) bearing and sharing responsibility and (4) weighing up medication risks and benefits. These can form the basis for more in-depth qualitative research involving a broader, more diverse sample. Discussion. The supported discussion enabled carer voices and perspectives to be expressed and to be linked to the process of identifying problems in medications management as directly experienced by carers. This was used to inform an agenda for research proposals which would be meaningful for carers and people with dementia. © 2014 Poland et al.; licensee BioMed Central Ltd
The development and evaluation of exercises in meaningful word practice in first grade,
Research chapter for this study will be found in Ash, Dorothea: "Development and evaluation of silent reading exercises in grade one"
Thesis (M.A.)--Boston Universit
Recommended from our members
A new optical design for the BNL isotope production transport line
The 200 MeV linac at BNL has recently been upgraded. As a result, 2.5 times more average beam current can be delivered to the Brookhaven Isotope Resource Center (BIRC), formerly called BLIP, a facility which produces radionuclides and radiopharmaceutical for the medical community, and also supports a research program seeking more effective diagnostic and therapeutic agents. The optics of the beam transport line to BIRC was redesigned to (a) reduce transverse fluctuations of the beam at the target due to any linac energy fluctuations, (b) produce a flat beam distribution at the target, in order to avoid melting certain target materials, and (c) handle the higher beam intensity while keeping radiation levels low. A profile monitor was also modified to monitor the flatness of the beam using the algebraic reconstruction technique (ART). The above improvements will be described, and results of the commissioning of the line during the 1996 running period will be discussed
Recommended from our members
R&D ERL: Vacuum
The ERL Vacuum systems are depicted in a figure. ERL has eight vacuum volumes with various sets of requirements. A summary of vacuum related requirements is provided in a table. Five of the eight volumes comprise the electron beamline. They are the 5-cell Superconducting RF Cavity, Superconducting e-gun, injection, loop and beam dump. Two vacuum regions are the individual cryostats insulating the 5-cell Superconducting RF Cavity and the Superconducting e-gun structures. The last ERL vacuum volume not shown in the schematic is the laser transport line. The beamline vacuum regions are separated by electropneumatic gate valves. The beam dump is common with loop beamline but is considered a separate volume due to geometry and requirements. Vacuum in the 5-cell SRF cavity is maintained in the {approx}10{sup -9} torr range at room temperature by two 20 l/s ion pumps and in the e-gun SRF cavity by one 60 l/s ion pump. Vacuum in the SRF cavities operated at 2{sup o}K is reduced to low 10{sup -11} torr via cryopumping of the cavity walls. The cathode of the e-gun must be protected from poisoning, which can occur if vacuum adjacent to the e-gun in the injection line exceeds 10-11 torr range in the injection warm beamline near the e-gun exit. The vacuum requirements for beam operation in the loop and beam dump are 10-9 torr range. The beamlines are evacuated from atmospheric pressure to high vacuum level with a particulate free, oil free turbomolecular pumping cart. 25 l/s shielded ion pumps distributed throughout the beamlines maintain the vacuum requirement. Due to the more demanding vacuum requirement of the injection beamline proximate to the e-gun, a vacuum bakeout of the injection beamline is required. In addition, two 200 l/s diode ion pumps and supplemental pumping provided by titanium sublimation pumps are installed in the injection line just beyond the exit of the e-gun. Due to expected gas load a similar pumping arrangement is planned for the beam dump. The cryostat vacuum thermally insulating the SRF cavities need only reduce the convective heat load such that heat loss is primarily radiation through several layers of multi-layer insulation and conductive end-losses which are contained by 5{sup o}K thermal transitions. Prior to cool down rough vacuum {approx}10{sup -5} torr range is established and maintained by a dedicated turbomolecular pump station. Cryopumping by the cold mass and heat shields reduces the insulating vacuum to 10{sup -7} torr range after cool down
R&D ERL: Vacuum
The ERL Vacuum systems are depicted in a figure. ERL has eight vacuum volumes with various sets of requirements. A summary of vacuum related requirements is provided in a table. Five of the eight volumes comprise the electron beamline. They are the 5-cell Superconducting RF Cavity, Superconducting e-gun, injection, loop and beam dump. Two vacuum regions are the individual cryostats insulating the 5-cell Superconducting RF Cavity and the Superconducting e-gun structures. The last ERL vacuum volume not shown in the schematic is the laser transport line. The beamline vacuum regions are separated by electropneumatic gate valves. The beam dump is common with loop beamline but is considered a separate volume due to geometry and requirements. Vacuum in the 5-cell SRF cavity is maintained in the {approx}10{sup -9} torr range at room temperature by two 20 l/s ion pumps and in the e-gun SRF cavity by one 60 l/s ion pump. Vacuum in the SRF cavities operated at 2{sup o}K is reduced to low 10{sup -11} torr via cryopumping of the cavity walls. The cathode of the e-gun must be protected from poisoning, which can occur if vacuum adjacent to the e-gun in the injection line exceeds 10-11 torr range in the injection warm beamline near the e-gun exit. The vacuum requirements for beam operation in the loop and beam dump are 10-9 torr range. The beamlines are evacuated from atmospheric pressure to high vacuum level with a particulate free, oil free turbomolecular pumping cart. 25 l/s shielded ion pumps distributed throughout the beamlines maintain the vacuum requirement. Due to the more demanding vacuum requirement of the injection beamline proximate to the e-gun, a vacuum bakeout of the injection beamline is required. In addition, two 200 l/s diode ion pumps and supplemental pumping provided by titanium sublimation pumps are installed in the injection line just beyond the exit of the e-gun. Due to expected gas load a similar pumping arrangement is planned for the beam dump. The cryostat vacuum thermally insulating the SRF cavities need only reduce the convective heat load such that heat loss is primarily radiation through several layers of multi-layer insulation and conductive end-losses which are contained by 5{sup o}K thermal transitions. Prior to cool down rough vacuum {approx}10{sup -5} torr range is established and maintained by a dedicated turbomolecular pump station. Cryopumping by the cold mass and heat shields reduces the insulating vacuum to 10{sup -7} torr range after cool down
- …