1,691 research outputs found
Low cycle fatigue behavior of polycrystalline NiAl at 300 and 1000 K
The low cycle fatigue behavior of polycrystalline NiAl was determined at 300 and 1000 K - temperatures below and above the brittle- to-ductile transition temperature (BDTT). Fully reversed, plastic strain-controlled fatigue tests were conducted on two differently fabricated alloy samples: hot isostatically pressed (HIP'ed) prealloyed powder and hot extruded castings. HIP'ed powder (HP) samples were tested only at 1000 K, whereas the more ductile cast-and-extruded (C+E) NiAl samples were tested at both 1000 and 300 K. Plastic strain ranges of 0.06 to 0.2 percent were used. The C+E NiAl cyclically hardened until fracture, reaching stress levels approximately 60 percent greater than the ultimate tensile strength of the alloy. Compared on a strain basis, NiAl had a much longer fatigue life than other B2 ordered compounds in which fracture initiated at processing-related defects. These defects controlled fatigue life at 300 K, with fracture occurring rapidly once a critical stress level was reached. At 1000 K, above the BDTT, both the C+E and HP samples cyclically softened during most of the fatigue tests in air and were insensitive to processing defects. The processing method did not have a major effect on fatigue life; the lives of the HP samples were about a factor of three shorter than the C+E NiAl, but this was attributed to the lower stress response of the C+E material. The C+E NiAl underwent dynamic grain growth, whereas the HP material maintained a constant grain size during testing. In both materials, fatigue life was controlled by intergranular cavitation and creep processes, which led to fatigue crack growth that was primarily intergranular in nature. Final fracture by overload was transgranular in nature. Also, HP samples tested in vacuum had a life three times longer than their counterparts tested in air and, in contrast to those tested in air, hardened continuously over half of the sample life, thereby indicating an environmentally assisted fatigue damage mechanism. The C+E samples were tested only in air. At 1000 K, NiAl exhibited a superior fatigue life when compared to most superalloys on a plastic strain basis, but was inferior to most superalloys on a stress basis
Beobachter beobachten Beobachter. Eine andere Sicht auf das linguistische Monitoring der juristischen Experten-Laien-Kommunikation
The author of this commenting article presents his reactions to the notion of a linguistic monitoring of the communication between experts and non-experts in the area of law. This type of linguistic monitoring may contribute to the development of linguistics as well as of law. It will enable linguists to take a closer look at one of the most important institutional uses of language and may also help lawyers to see aspects outside their usual scope, especially as far as the traditional view of legal interpretation is concerned. However, linguistic monitoring will have to develop specific methods of description in order to cover the characteristics of legal communication. A thorough analysis of legal communication will have to precede studies of the communication between experts and non-experts in the area of law
GEOS I tracking station positions on the SAO standard earth /C-5/
GEOS 1 tracking station positions on SAO standard earth C-5 mode
Gravity field information from Gravity Probe-B
The Gravity Probe-B Mission will carry the Stanford Gyroscope relativity experiment into orbit in the mid 1990's, as well as a Global Positioning System (GPS) receiver whose tracking data will be used to study the earth gravity field. Estimates of the likely quality of a gravity field model to be derived from the GPS data are presented, and the significance of this experiment to geodesy and geophysics are discussed
Die Leiden des jungen "Gretchen" : ein Frankfurter Kriminalfall anno 1771/1772: der Prozess gegen die Kindsmörderin Susanna Margaretha Brandt
A 40th deg and order gravitational field model for Mars
Understanding the origin and evolution of major photographic features on Mars, such as the hemispheric dichotomy and Tharsis rise, will require improved resolution of that planet's gravitational and topographic fields. The highest resolution gravity model for Mars published to date was derived from Doppler tracking data from the Mariner 9 and Viking 1 and 2 spacecraft, and is of 18th degree and order. That field has a maximum spatial resolution of approx. 600 km, which is comparable to that of the best topographic model. The resolution of previous gravity models was limited not by data density, but rather by the computational resources available at the time. Because this restriction is no longer a limitation, the Viking and Mariner data sets were reanalyzed and a gravitational field was derived complete to the 40th degree and order with a corresponding maximum spatial resolution of 300 km where the data permit
Gravitational field models for the earth (GEM 1 and 2)
Two models of the earth's gravitational field have been computed at Goddard Space Flight Center. The first, Goddard Earth Model 1 (GEM 1), has been derived from satellite tracking data. The second, Goddard Earth Model 2 (GEM 2), has been derived from a combination of satellite tracking and surface gravimetric data. The geopotential models are represented in spherical harmonics complete to degree and order 16 for the combined solution and complete to degree and order 12 for the satellite solution. Both solutions include zonal terms to degree 21 and related satellite resonant coefficients to degree 22. The satellite data consisted primarily of optical data processed on 300 weekly orbital arcs for 25 close earth satellites. Surface gravity data were employed in the form of 5 deg x 5 deg mean free-air gravity anomalies providing about 70% world coverage. Station locations were obtained for 46 tracking sites by combining electronic, laser, and additional optical tracking data with the above satellite data. Analysis of the radial positions of these stations and a value of mean gravity on the geoid indicated a mean equatorial radius for the earth of about 6378145 meters. Results of geopotential tests on satellite data not used in the solution show that better agreement was obtained with the GEM 1 and GEM 2 models than with the 1969 Smithsonian Standard Earth 2 model
Preface: Advances in post-processing and blending of deterministic and ensemble forecasts
The special issue on advances in post-processing and blending of deterministic and ensemble forecasts is the outcome of several successful successive sessions organized at the General Assembly of the European Geosciences Union. Statistical post-processing and blending of forecasts are currently topics of important attention and development in many countries to produce optimal forecasts. Ten contributions have been received, covering key aspects of current concerns on statistical post-processing, namely the restoration of inter-variable dependences, the impact of model changes on the statistical relationships and how to cope with it, the operational implementation at forecasting centers, the development of appropriate metrics for forecast verification, and finally two specific applications to snow forecasts and seasonal forecasts of the North Atlantic Oscillation
- …