EFFECT OF VARIABLE CANT ANGLE ON SWEEPBACK WING

Winglets are commonly used drag-reduction and fuel-saving technologies in today’s aviation. The primary purpose of the winglets is to reduce the lift-induced drag, therefore improving fuel efficiency and aircraft performance. Traditional winglets are designed as fixed devices attached at the tips of the wings. However, because they are fixed surfaces, they give their best lift-induced drag reduction at a single design point. In this work, we propose the use of variable cant angle winglets which could potentially allow aircraft to get the best all-around performance (in terms of lift-induced drag reduction), at different angle-of-attack values. This paper describes a XFLR 3-dimensional winglets analysis that was performed on a wing of NACA2412 cross sectional airfoil. The wing has span 2.40 m, root chord 0.180 m, tip chord 0.110 m, sweep angle 5 degree and taper ratio 0.556 and for a winglet NACA 0024 cross-sectional airfoil was considered of max thickness 24 percent at 30 percent chord, max camber 0 percent at 0 percent chord. The present study shows effects of wing without winglet, wing with winglet at cant angle 30, 60, 90. The results obtained from the analysis demonstrate that by carefully adjusting the cant angle, the aerodynamic performance can be improved

Developing a Mobile Application‐Based Particle Image Velocimetry Tool for Enhanced Teaching and Learning in Fluid Mechanics: A Design‐Based Research Approach

A robust and intuitive understanding of fluid mechanics—the applied science of fluid motion—is foundational within many engineering disciplines, including aerospace, chemical, civil, mechanical, naval, and ocean engineering. In‐depth knowledge of fluid mechanics is critical to safe and economical design of engineering applications employed globally everyday, such as automobiles, aircraft, and sea craft, and to meeting global 21st century engineering challenges, such as developing renewable energy sources, providing access to clean water, managing the environmental nitrogen cycle, and improving urban infrastructure. Despite the fundamental nature of fluid mechanics within the broader undergraduate engineering curriculum, students often characterize courses in fluid mechanics as mathematically onerous, conceptually difficult, and aesthetically uninteresting; anecdotally, undergraduates may choose to opt‐out of fluids engineering‐related careers based on their early experiences in fluids courses. Therefore, the continued development of new frameworks for engineering instruction in fluid mechanics is needed. Toward that end, this paper introduces mobile instructional particle image velocimetry (mI‐PIV), a low‐cost, open‐source, mobile application‐based educational tool under development for smartphones and tablets running Android. The mobile application provides learners with both technological capability and guided instruction that enables them to visualize and experiment with authentic flow fields in real time. The mI‐PIV tool is designed to generate interest in and intuition about fluid flow and to improve understanding of mathematical concepts as they relate to fluid mechanics by providing opportunities for fluids‐related active engagement and discovery in both formal and informal learning contexts

Methodological framework for an integrated multi-scale vulnerability and resilience assessment

The deliverable illustrates the methodological framework to assess vulnerability and resilience across different temporal and spatial scales, acknowledging the different domains where the latter may manifest, and in particular in the natural and the built environment, allocating a large importance to the so called “critical infrastructures”, in social and economic systems. A set of four matrices has been developed to identify what aspects should be looked at before the impact, that is to say what shows the potential ability or inability to cope with an extreme; at the impact, addressing in particular the capacity (or incapacity) to sustain various types of stresses (in the form of acceleration, pressure, heat…); in the time immediately after the impact, as the ability (or inability) to suffer losses and still continue functioning; and in the longer term of recovery, as the capacity to find a new state of equilibrium in which the fragilities manifested during and after the impact are addressed. Developing the framework, a particular attention has been paid to the relationships among systems within the same matrix and among matrices, across spatial and temporal scales. A set of matrices has been developed for different natural hazards, including in particular landslides and floods, trying to include as much as possible what past cases, the international literature and prior experience of involved partners have indicated as relevant parameters and factors to look at. In this regard, the project builds on the state of the art, embedding what has been learned until now in terms of response capacity to a variety of stresses and in the meantime identifying gaps to be addressed by future research

Spatiotemporal expansion of primary progenitor zones in the developing human cerebellum

We present histological and molecular analyses of the developing human cerebellum from 30 days after conception to 9 months after birth. Differences in developmental patterns between humans and mice include spatiotemporal expansion of both ventricular and rhombic lip primary progenitor zones to include subventricular zones containing basal progenitors. The human rhombic lip persists longer through cerebellar development than in the mouse and undergoes morphological changes to form a progenitor pool in the posterior lobule, which is not seen in other organisms, not even in the nonhuman primate the macaque. Disruptions in human rhombic lip development are associated with posterior cerebellar vermis hypoplasia and Dandy-Walker malformation. The presence of these species-specific neural progenitor populations refines our insight into human cerebellar developmental disorders

Molecular imaging of cell death in vivo by a novel small molecule probe

Apoptosis has a role in many medical disorders, therefore assessment of apoptosis in vivo can be highly useful for diagnosis, follow-up and evaluation of treatment efficacy. ApoSense is a novel technology, comprising low molecular-weight probes, specifically designed for imaging of cell death in vivo. In the current study we present targeting and imaging of cell death both in vitro and in vivo, utilizing NST-732, a member of the ApoSense family, comprising a fluorophore and a fluorine atom, for both fluorescent and future positron emission tomography (PET) studies using an 18F label, respectively. In vitro, NST-732 manifested selective and rapid accumulation within various cell types undergoing apoptosis. Its uptake was blocked by caspase inhibition, and occurred from the early stages of the apoptotic process, in parallel to binding of Annexin-V, caspase activation and alterations in mitochondrial membrane potential. In vivo, NST-732 manifested selective uptake into cells undergoing cell-death in several clinically-relevant models in rodents: (i) Cell-death induced in lymphoma by irradiation; (ii) Renal ischemia/reperfusion; (iii) Cerebral stroke. Uptake of NST-732 was well-correlated with histopathological assessment of cell-death. NST-732 therefore represents a novel class of small-molecule detectors of apoptosis, with potential useful applications in imaging of the cell death process both in vitro and in vivo

On Concurrently Secure Computation in the Multiple Ideal Query Model

The multiple ideal query (MIQ) model was introduced by Goyal, Jain and Ostrovsky [Crypto’10] as a relaxed notion of security which allows one to construct concurrently secure protocols in the plain model. The main question relevant to the MIQ model is how many queries must we allow to the ideal world adversary? The importance of the above question stems from the fact that if the answer is positive, then it would enable meaningful security guarantees in many application scenarios, as well as, lead to resolution of long standing open questions such as fully concurrent password based key exchange in the plain model. In this work, we continue the study of the MIQ model and prove severe lower bounds on the number of ideal queries per session. Following are our main results: 1. There exists a two-party functionality that cannot be securely realized in the MIQ model with only a constant number of ideal queries per session. 2. There exists a two-party functionality that cannot be securely realized in the MIQ model by any constant round protocol, with any polynomial number of ideal queries per session. Both of these results are unconditional and even rule out protocols proven secure using