2,054 research outputs found

    Coupled onshore erosion and offshore sediment loading as causes of lower crust flow on the margins of South China Sea

    Get PDF
    © 2015, Clift. Hot, thick continental crust is susceptible to ductile flow within the middle and lower crust where quartz controls mechanical behavior. Reconstruction of subsidence in several sedimentary basins around the South China Sea, most notably the Baiyun Sag, suggests that accelerated phases of basement subsidence are associated with phases of fast erosion onshore and deposition of thick sediments offshore. Working together these two processes induce pressure gradients that drive flow of the ductile crust from offshore towards the continental interior after the end of active extension, partly reversing the flow that occurs during continental breakup. This has the effect of thinning the continental crust under super-deep basins along these continental margins after active extension has finished. This is a newly recognized form of climate-tectonic coupling, similar to that recognized in orogenic belts, especially the Himalaya. Climatically modulated surface processes, especially involving the monsoon in Southeast Asia, affects the crustal structure offshore passive margins, resulting in these “load-flow basins”. This further suggests that reorganization of continental drainage systems may also have a role in governing margin structure. If some crustal thinning occurs after the end of active extension this has implications for the thermal history of hydrocarbon-bearing basins throughout the area where application of classical models results in over predictions of heatflow based on observed accommodation space

    Sedimentary budget of the Northwest Sub-basin, South China Sea: controlling factors and geological implications

    Get PDF
    We calculated the sedimentary budget of the Northwest Sub-basin (NWSB), South China Sea for different geological times based on interpretations of four multichannel seismic profiles across the basin with constraints from International Ocean Discovery Program (IODP) Expeditions 367 and 368 drilling results. Sedimentation was generally dominated by regional tectonic events and climate change, but complicated by local tectonic events and geographic position, which resulted in a specific sedimentary budget in the NWSB compared with other marginal basins and the Southwest Sub-basin. The sedimentation rate was relatively low following the opening of the NWSB but increased gradually during the Middle Miocene, corresponding to the uplift of the Tibetan Plateau and the Asian monsoon. It reached its peak in the Late Miocene, corresponding to uplift of the Dongsha Island region that caused intensive bypass of eroded sediments from the Baiyun Sag into the abyssal basin, and reduced again during the Pliocene because of sediment storage on the wide northern continental shelf area compared to the abyssal basin during a period of high-stand sea level. Increase in sedimentation during the Pleistocene suggests that continental erosion and sediment transport to the abyssal basin were enhanced by an intensified Asian summer monsoon and glacial-interglacial climate fluctuations. Since the opening of the NWSB, the primary sediment provenance has been from southern China, with minor contributions from the Red River, Hainan Island, as well as local uplifts on the continental shelf

    The Role of Shugoshin in Meiotic Chromosome Segregation

    Get PDF
    During meiosis, DNA replication is followed by 2 successive chromosome segregation events, resulting in the production of gametes with a haploid number of chromosomes from a diploid precursor cell. Faithful chromosome segregation in meiosis requires that sister chromatid cohesion is lost from chromosome arms during meiosis I, but retained at centromeric regions until meiosis II. Recent studies have begun to uncover the mechanisms underlying this stepwise loss of cohesion in meiosis and the role of a conserved protein, shugoshin, in regulating this process

    Characterization of Iridium Coated Rhenium Used in High-Temperature, Radiation-Cooled Rocket Thrusters

    Get PDF
    Materials used for radiation-cooled rocket thrusters must be capable of surviving under extreme conditions of high-temperatures and oxidizing environments. While combustion efficiency is optimized at high temperatures, many refractory metals are unsuitable for thruster applications due to rapid material loss from the formation of volatile oxides. This process occurs during thruster operation by reaction of the combustion products with the material surface. Aerojet Technical Systems has developed a thruster cone chamber constructed of Re coated with Ir on the inside surface where exposure to the rocket exhaust occurs. Re maintains its structural integrity at high temperature and the Ir coating is applied as an oxidation barrier. Ir also forms volatile oxide species (IrO2 and IrO3) but at a considerably slower rate than Re. In order to understand the performance limits of Ir-coated Re thrusters, we are investigating the interdiffusion and oxidation kinetics of Ir/Re. The formation of iridium and rhenium oxides has been monitored in situ by Raman spectroscopy during high temperature exposure to oxygen. For pure Ir, the growth of oxide films as thin as approximately 200 A could be easily detected and the formation of IrO2 was observed at temperatures as low as 600 C. Ir/Re diffusion test specimens were prepared by magnetron sputtering of Ir on Re substrates. Concentration profiles were determined by sputter Auger depth profiles of the heat treated specimens. Significant interdiffusion was observed at temperatures as low as 1000 C. Measurements of the activation energy suggest that below 1350 C, the dominant diffusion path is along defects, most likely grain boundaries, rather than bulk diffusion through the grains. The phases that form during interdiffusion have been examined by x ray diffraction. Analysis of heated test specimens indicates that the Ir-Re reaction produces a solid solution phase of Ir dissolved in the HCP structure of Re

    Evolution and variability of the Asian monsoon and its potential linkage with uplift of the Himalaya and Tibetan Plateau

    Get PDF
    © 2016, Tada et al. Uplift of the Himalaya and Tibetan Plateau (HTP) and its linkage with the evolution of the Asian monsoon has been regarded as a typical example of a tectonic–climate linkage. Although this linkage remains unproven because of insufficient data, our understanding has greatly advanced in the past decade. It is thus timely to summarize our knowledge of the uplift history of the HTP, the results of relevant climate simulations, and spatiotemporal changes in the Indian and East Asian monsoons since the late Eocene. Three major pulses of the HTP uplift have become evident: (1) uplift of the southern and central Tibetan Plateau (TP) at ca. 40–35 Ma, (2) uplift of the northern TP at ca. 25–20 Ma, and (3) uplift of the northeastern to eastern TP at ca. 15–10 Ma. Modeling predictions suggest that (i) uplift of the southern and central TP should have intensified the Indian summer monsoon (ISM) and the Somali Jet at 40–35 Ma; (ii) uplift of the northern TP should have intensified the East Asian summer monsoon (EASM) and East Asian winter monsoon (EAWM), as well as the desertification of inland Asia at 25–20 Ma; and (iii) uplift of the northeastern and eastern TP should have further intensified the EASM and EAWM at 15–10 Ma. We tested these predictions by comparing them with paleoclimate data for the time intervals of interest. There are insufficient paleoclimate data to test whether the ISM and Somali Jet intensified with the uplift of the southern and central TP at 40–35 Ma, but it is possible that such uplift enhanced erosion and weathering that drew down atmospheric CO2 and resulted in global cooling. There is good evidence that the EASM and EAWM intensified, and desertification started in inland Asia at 25–20 Ma in association with the uplift of the northern TP. The impact of the uplift of the northeastern and eastern TP on the Asian monsoon at 15–10 Ma is difficult to evaluate because that interval was also a time of global cooling and Antarctic glaciation that might also have influenced the intensity of the Asian monsoon

    Chemical weathering and provenance evolution of Holocene–Recent sediments from the Western Indus Shelf, Northern Arabian Sea inferred from physical and mineralogical properties

    Get PDF
    We present a multi-proxy mineral record based on X-ray diffraction and diffuse reflectance spectrophotometry analysis for two cores from the western Indus Shelf in order to reconstruct changing weathering intensities, sediment transport, and provenance variations since 13 ka. Core Indus-10 is located northwest of the Indus Canyon and exhibits fluctuations in smectite/(illite + chlorite) ratios that correlate with monsoon intensity. Higher smectite/(illite + chlorite) and lower illite crystallinity, normally associated with stronger weathering, peaked during the Early–Mid Holocene, the period of maximum summer monsoon. Hematite/goethite and magnetic susceptibility do not show clear co-variation, although they both increase at Indus-10 after 10 ka, as the monsoon weakened. At Indus-23, located on a clinoform just west of the canyon, hematite/goethite increased during a period of monsoon strengthening from 10 to 8 ka, consistent with increased seasonality and/or reworking of sediment deposited prior to or during the glacial maximum. After 2 ka terrigenous sediment accumulation rates in both cores increased together with redness and hematite/goethite, which we attribute to widespread cultivation of the floodplain triggering reworking, especially after 200 years ago. Over Holocene timescales sediment composition and mineralogy in two localities on the high-energy shelf were controlled by varying degrees of reworking, as well as climatically modulated chemical weathering

    Spreading dynamics and sedimentary process of the Southwest Sub-basin, South China Sea: Constraints from multi-channel seismic data and IODP Expedition 349

    Get PDF
    © 2015 The Authors. Neotectonic and sedimentary processes in the South China Sea abyssal basin are still debated because of the lack of drilling evidence to test competing models. In this study, we interpreted four multi-channel seismic profiles across the Southwest Sub-basin (SWSB) and achieved stratigraphic correlation with new drilling data from Integrated Ocean Discovery Program (IODP) Expedition 349. Neogene sediments are divided into four stratigraphic units, each with distinctive seismic character. Sedimentation rate and lithology variations suggest climate-controlled sedimentation. In the late Miocene winter monsoon strength and increased aridity in the limited accumulation rates in the SWSB. Since the Pliocene summer monsoons and a variable glacial-interglacial climate since have enhanced accumulation rates. Terrigeneous sediments in the SWSB are most likely derived from the southwest. Three basement domains are classified with different sedimentary architectures and basement structures, including hyper-stretched crust, exhumed subcontinental mantle, and steady state oceanic crust. The SWSB has an asymmetric geometry and experienced detachment faulting in the final stage of continental rifting and exhumation of continental mantle lithosphere. Mantle lithospheric breakup post-dates crustal separation, delaying the establishment of oceanic spreading and steady state crust production

    Comment on “Geochemistry of buried river sediments from Ghaggar Plains, NW India: Multi - proxy records of variations in provenance, paleoclimate, and paleovegetation patterns in the late quaternary” by Ajit Singh, Debajyoti Paul, Rajiv Sinha, Kristina J. Thomsen, Sanjeev Gupta

    Get PDF
    Author Posting. © The Author(s), 2016. This is the author's version of the work. It is posted here for personal use, not for redistribution. The definitive version was published in Palaeogeography, Palaeoclimatology, Palaeoecology 455 (2016): 65-67, doi:10.1016/j.palaeo.2016.05.001.Singh et al. (2016) published a geochemical record of sediment compositions from the flood plain of the Ghaggar River in western India and use the changing provenance, particularly as traced by Nd isotope composition, to reconstruct how erosion patterns have changed over the past 100 k.y. In doing so they propose a link between climate change and erosion, and they argue for more erosion from the Higher Himalaya during warmer interglacial periods and more from the Lesser Himalaya during glacial intervals. While we support the concept of erosion patterns being climatically modulated we here take the opportunity to compare the data presented by Singh et al. (2016) to relevant published records within the region greater Ghaggar region and to open a balanced discussion on how climate and erosion are coupled in the western Himalaya
    corecore