Self-aligned gallium arsenide heterojunction bipolar transistor using refractory metallisation

Improvements in epitaxial growth and processing technologies have revived a great deal of interest in the heterojunction bipolar transistor (HBT). In this project, AIGaAs/GaAS HBTs have been fabricated using a new self-aligned process which exploits the characteristics of some refractory metals deposited by sputtering to obtain a T-shaped contact structure for the emitter. wet and dry etching techniques were used to fabricate the T-shaped contact. A refractory metallisation system consisting of sequentially sputtered layers of Ge/Mo/Ni was investigated for contacting the emitter of the transistor. After alloying in a thermal furnace at 750°C for 30 minutes in a nitrogen atmOSPhere, a low specific contact resistance of 2 x 10-6 ohm-cm was measured by standard transmission line model (TLM) for measurement of contact resistance. A metallisation system consisting of sequentially evaporated AU/Zn/Au was used for the base and Ni/AuGe/Ni/AU was used for the collector. Alloying with the same condition1 as above gave specific contact re1istances of 1.2 x 10-6 ohm-cm for the base and 8.6 x 10 -6 ohm-cm for the collector. AS an alternative to ion implantation, zinc diffusion was used as an alternative technique to dope the base contact region. The acceptor concentration profile of the diffused region was studied by 'Hall and Stripe' technique and a surface concentration of 1 x 10 20 cm -3 was measured. This highly doped base contact region can be used to achieve low ohmic contact to the base. Results show that for devices designed with similar dimensions for both processes, the new self-aligned process shows a net improvement in the frequency response of the devices (ft= 10.7GHZ and &nax=9.8GHZ for self-aligned and ft=8.0GHZ and for conventional 8um HBT)

Effect of floor type on the performance, physiological and behavioural responses of finishing beef steers

peer-reviewedBackground:The study objective was to investigate the effect of bare concrete slats (Control), two types of mats [(Easyfix mats (mat 1) and Irish Custom Extruder mats (mat 2)] fitted on top of concrete slats, and wood-chip to simulate deep bedding (wood-chip placed on top of a plastic membrane overlying the concrete slats) on performance, physiological and behavioral responses of finishing beef steers. One-hundred and forty-four finishing steers (503 kg; standard deviation 51.8 kg) were randomly assigned according to their breed (124 Continental cross and 20 Holstein–Friesian) and body weight to one of four treatments for 148 days. All steers were subjected to the same weighing, blood sampling (jugular venipuncture), dirt and hoof scoring pre study (day 0) and on days 23, 45, 65, 86, 107, 128 and 148 of the study. Cameras were fitted over each pen for 72 h recording over five periods and subsequent 10 min sampling scans were analysed. Results: Live weight gain and carcass characteristics were similar among treatments. The number of lesions on the hooves of the animals was greater (P < 0.05) on mats 1 and 2 and wood-chip treatments compared with the animals on the slats. Dirt scores were similar for the mat and slat treatments while the wood-chip treatment had greater dirt scores. Animals housed on either slats or wood-chip had similar lying times. The percent of animals lying was greater for animals housed on mat 1 and mat 2 compared with those housed on concrete slats and wood chips. Physiological variables showed no significant difference among treatments. Conclusions: In this exploratory study, the performance or welfare of steers was not adversely affected by slats, differing mat types or wood-chip as underfoot material

Fabrication and characterization of micro-inductors deposited on magnetic thin and thick layers

This paper presents two fabrication techniques of spiral integrated inductors based on magnetic materials. For the first one, the magnetic core is a thin film deposited by RF magnetron sputtering, for the second technique the magnetic core is a thick layer of YIG obtained by micromachining. The addition of the magnetic material is expected to improve the performances of the integrated structure with electromagnetic shield. Low and high frequency equipment are used to characterize the manufactured components. A good correlation is obtained between the results by simulation and measurements for the two manufacturing techniques. These results show that the inductance increases when the thickness of the magnetic layer increases, we can double the inductance value for a thickness sufficiently high

Determinants of serum zinc in a random population sample of four Belgian towns with different degrees of environmental exposure to cadmium

This report investigated the distribution of serum zinc and the factors determining serum zinc concentration in a large random population sample. The 1977 participants (959 men and 1018 women), 20–80 years old, constituted a stratified random sample of the population of four Belgian districts, representing two areas with low and two with high environmental exposure to cadmium. For each exposure level, a rural and an urban area were selected. The serum concentration of zinc, frequently used as an index for zinc status in human subjects, was higher in men (13.1 μmole/L, range 6.5–23.0 μmole/L) than in women (12.6 μmole/L, range 6.3–23.2 μmole/L). In men, 20% of the variance of serum zinc was explained by age (linear and squared term, R = 0.29), diurnal variation (r = 0.29), and total cholesterol (r = 0.16). After adjustment for these covariates, a negative relationship was observed between serum zinc and both blood (r = −0.10) and urinary cadmium (r = −0.14). In women, 11% of the variance could be explained by age (linear and squared term, R = 0.15), diurnal variation in serum zinc (r = 0.27), creatinine clearance (r = −0.11), log γ-glutamyltranspeptidase (r = 0.08), cholesterol (r = 0.07), contraceptive pill intake (r = −0.07), and log serum ferritin (r = 0.06). Before and after adjustment for significant covariates, serum zinc was, on average, lowest in the two districts where the body burden of cadmium, as assessed by urinary cadmium excretion, was highest. These results were not altered when subjects exposed to heavy metals at work were excluded from analysis

Prevalence of chronic kidney disease among people living with HIV/AIDS in Burundi: a cross-sectional study

<p>Abstract</p> <p>Background</p> <p>Since little is known about chronic kidney disease (CKD) among people living with HIV/AIDS (PLWHA) in Sub-Saharan Africa, the prevalence and nature of CKD were assessed in Burundi through a multicenter cross-sectional study.</p> <p>Methods</p> <p>Patients underwent assessments at baseline and 3 months later. Glomerular Filtration Rate (GFR) was estimated using abbreviated 4-variable Modification of Diet in Renal Diseases (MDRD) and Cockroft-Gault estimation methods. Patients were classified at month 3 into various CKD stages using the National Kidney Foundation (NKF) definition, which combines GFR and urinary abnormalities. Risk factors for presence of proteinuria (PRO) and aseptic leukocyturia (LEU) were further analyzed using multiple logistic regression.</p> <p>Results</p> <p>Median age of the patients in the study (N = 300) was 40 years, 70.3% were female and 71.7% were on highly active antiretroviral therapy. Using the MDRD method, CKD prevalence in patients was 45.7%, 30.2% of whom being classified as stage 1 according to the NKF classification, 13.5% as stage 2 and 2% as stage 3. No patient was classified as stage 4 or 5. Among CKD patients with urinary abnormality, PRO accounted for 6.1% and LEU for 18.4%. Significant associations were found between LEU and non-steroidal anti-inflammatory drug (NSAID) use, previous history of tuberculosis, low body mass index and female gender and between PRO and high viral load.</p> <p>Conclusion</p> <p>Our study, using a very sensitive definition for CKD evaluation, suggests a potentially high prevalence of CKD among PLWHA in Burundi. Patients should be regularly monitored and preventative measures implemented, such as monitoring NSAID use and adjustment of drug dosages according to body weight. Urine dipsticks could be used as a screening tool to detect patients at risk of renal impairment.</p

Selective Trihydroxylated Azepane Inhibitors of NagZ, a Glycosidase Involved in Pseudomonas Aeruginosa Resistance to β-lactam Antibiotics

The synthesis of a series of D-gluco-like configured 4,5,6-trihydroxyazepanes bearing a triazole, a sulfonamide or a fluorinated acetamide moiety at C-3 is described. These synthetic derivatives have been tested for their ability to selectively inhibit the muropeptide recycling glucosaminidase NagZ and to thereby increase sensitivity of Pseudomonas aeruginosa to β-lactams, a pathway with substantial therapeutic potential. While introduction of triazole and sulfamide groups failed to lead to glucosaminidase inhibitors, the NHCOCF3 analog proved to be a selective inhibitor of NagZ over other glucosaminidases including human OGA and lysosomal hexosaminidases HexA and B. The synthesis of a series of D-gluco-like configured 4,5,6-trihydroxyazepanes bearing a triazole, a sulfonamide or a fluorinated acetamide moiety at C-3 is described. These synthetic derivatives have been tested for their ability to selectively inhibit the muropeptide recycling glucosaminidase NagZ and to thereby increase sensitivity of Pseudomonas aeruginosa to β-lactams, a pathway with substantial therapeutic potential. While introduction of triazole and sulfamide groups failed to lead to glucosaminidase inhibitors, the NHCOCF3 analog proved to be a selective inhibitor of NagZ over other glucosaminidases including human OGA and lysosomal hexosaminidases HexA and B &nbsp