Non-diffracting beam generated from a photonic integrated circuit based axicon-like lens

We demonstrate an on-chip silicon-on-insulator (SOI) device to generate a non-diffracting beam of ≈850 µm length from a diffractive axicon-like lens etched using a low resolution (200 nm feature size, 250 nm gap) deep-ultraviolet lithographic fabrication. The device consists of circular gratings with seven stages of 1x2 multimode interferometers. We present a technique to apodize the gratings azimuthally by breaking up the circles into arcs which successfully increased the penetration depth in the gratings from ≈5 µm to ≈60 µm. We characterize the device’s performance by coupling 1300±50 nm swept source laser in to the chip from the axicon and measuring the out-coupled light from a grating coupler. Further, we also present the implementation of balanced homodyne detection method for the spectral characterization of the device and show that the position of the output lobe of the axicon does not change significantly with wavelength

Oxidation Through Coating Cracks of SiC-Protected Carbon/Carbon

The oxidation of SiC-protected carbon/carbon through machined slots and naturally occurring craze cracks in the SiC was studied. The slot and crack geometries were characterized, and the subsurface oxidation of the carbon/carbon substrate at temperatures of 1000 to 1300 C in air was assessed using weight change, x-ray computed tomography, and optical microscopy of sections. Rate constants were derived from these measurements and compared with a two-step diffusion control model of carbon oxidation. Oxidation kinetic measurements on both the specimens with machined slots and with naturally occurring craze cracks showed good agreement with the model

Compact spectrometer based on disordered multi-mode interferometer

We demonstrate a compact (40 ${\mu}$m $\times$ 260 ${\mu}$m) spectrometer based on multimode interference aided by scattering of light from random SiO$_2$-filled hole arrays on a silicon-on-insulator platform. We characterize the performance of the spectrometer for wavelengths around 1310 nm, and report that the spectrometer can reconstruct a broadband $\sim$ 67 nm source, as well as Lorentzian probes of $\sim$ 1 nm bandwidth. This compact nanometer level resolution spectrometer can be fabricated at a low cost for lab-on-a-chip sensing and imaging applications.Comment: 11 pages, 6 figure

Electrical properties of Bi-implanted amorphous chalcogenide films

The impact of Bi implantation on the conductivity and the thermopower of amorphous chalcogenide films is investigated. Incorporation of Bi in Ge-Sb-Te and GeTe results in enhanced conductivity. The negative Seebeck coefficient confirms onset of the electron conductivity in GeTe implanted with Bi at a dose of 2x1016 cm-2. The enhanced conductivity is accompanied by defect accumulation in the films upon implantation as is inferred by using analysis of the space-charge limited current. The results indicate that native coordination defects in lone-pair semiconductors can be deactivated by means of ion implantation, and higher conductivity of the films stems from additional electrically active defects created by implantation of bismuth.Comment: This is an extended version of the results presented in Proc. SPIE 8982, 898213 (2014

Oxide phosphors for light upconversion; Yb3+ and Tm3+ co-doped Y2BaZnO5

Copyright 2011 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. This article appeared in Journal of Applied Physics 109, 063104 (2011) and may be found at

Oxidation Through Coating Cracks of SiC-Protected Carbon/Carbon

The oxidation of SiC-protected carbon/carbon through machined slots and naturally occurring craze cracks in the SiC was studied. The slot and crack geometries were characterized, and the subsurface oxidation of the carbon/carbon substrate at temperatures of 1000 to 1300 C in air was assessed using weight change, x-ray computed tomography, and optical microscopy of sections. Rate constants were derived from these measurements and compared with a two-step diffusion control model of carbon oxidation. Oxidation kinetic measurements on both the specimens with machined slots and with naturally occurring craze cracks showed good agreement with the model

Multiple roles of 1,4-diazabicyclo[2.2.2]octane in the solvothermal synthesis of iodobismuthates

Hybrid bismuth-containing halides are emerging as alternative candidates to lead-containing perovskites for light-harvesting applications, as Bi3+ is isoelectronic with Pb2+ and the presence of an active lone pair of electrons is expected to result in outstanding charge-carrier transport properties. Here, we report a family of one binary and three ternary iodobismuthates containing 1,4-diazabicyclo[2.2.2]octane (DABCO). These materials have been prepared solvothermally and their crystal structures, thermal stability and optical properties determined. Reactions carried out in the presence of bismuth iodide and DABCO produced (C6H12N2)BiI3 (1), which consists of hybrid ribbons in which pairs of edge-sharing bismuth octahedra are linked by DABCO ligands. Short I...I contacts give rise to a three-dimensional network. Similar reactions in the presence of copper iodide produced (C8H17N2)2Bi2Cu2I10 (2) and [(C6H13N2)2BiCu2I7](C2H5OH) (3), in which either ethylated DABCO cations, (EtDABCO)+, or monoprotonated DABCO cations, (DABCOH)+, are coordinated to copper in discrete tetranuclear and trinuclear clusters, respectively. In the presence of potassium iodide, a unique three-dimensional framework, (C6H14N2)[(C6H12N2)KBiI6] (4), was formed, which contains one-dimensional hexagonal channels, of approximately 6 Å in diameter. The optical band gaps of these materials, which are semiconductors, range between 1.82 and 2.27 eV, with the lowest values found for the copper-containing discrete clusters. Preliminary results on the preparation of thin films are presented

Patterns and variability in ocean acidification conditions in Puget Sound and the Strait of Juan de Fuca

The Washington Ocean Acidification Center is working with NOAA and other partners to increase understanding of ocean acidification dynamics and spatial variability in the Salish Sea, and how these correlate with planktonic responses. These data are critical for assessing water quality, areas with higher or lower OA stress, and to understand effects on the food web. Two main strategies are employed; seasonal ship cruises provide spatial coverage and the ability to collect plankton, while mooring buoys provide information on mechanisms and the range of variation due to the high-resolution and constant coverage they provide. Results show a strong degree of depth, seasonal, and spatial variation in pH and aragonite saturation state. In general, the lowest pH and aragonite saturation state values are at depth, particularly in stratified areas, though this can shift during seasonal localized upwelling, e.g., Southern Hood Canal, and in mixed water columns, e.g., the Main Basin. Seasonal patterns are spatially diverse, with stratified areas exhibiting strong vertical gradients with depth during summer and more homogenous conditions during winter; well-mixed areas show less variation year-round. This implies that species encounter quite different OA conditions in various parts of the Salish Sea between the seasons. Mooring CO2 data reveal higher variation during late fall through early spring at sites within the Salish Sea, due to winter mixing of stratified waters, yet the reverse pattern off the Washington coast, due to summer upwelling. In both cases, these mechanisms (winter mixing and summer upwelling) operate across a gradient, bringing relatively deeper lower pH / aragonite saturation state waters in contact with surface waters with higher values. Such changes in the spatial and depth distribution of corrosive conditions have broad implications for sensitive marine life