The feasibility of low-G grey solidification of nodular iron in the F-104 experimental furnace package

The rationale for low-g experiments with cast iron and the need for solidification in the grey form during these experiments are reviewed. The factors which determine whether an iron melt will solidify grey or white are discussed. Cooling rate versus microstructure was studied for a nodular iron candidate material for F-104 low-g solidification. The study determined that low-g grey solidification, using the present F-104 furnace system, of the nodular iron composition studied is not feasible. Specimen microstructure strongly suggested that the F-104 furnace's gas cooling system was causing excessive localized chill resulting in the nucleation of the unwanted iron carbide phase. A change is suggested, in the quench system design, that could possibly overcome this problem

The electrokinetic behavior of calcium oxalate monohydrate in macromolecular solutions

Electrophoretic mobilities were measured for calcium oxalate monohydrate (COM) in solutions containing macromolecules. Two mucopolysaccharides (sodium heparin and chrondroitin sulfate) and two proteins (positively charged lysozyme and negatively charged bovine serum albumin) were studied as adsorbates. The effects of pH, calcium oxalate surface charge (varied by calcium or oxalate ion activity), and citrate concentration were investigated. All four macromolecules showed evidence for chemical adsorption. The macromolecule concentrations needed for reversing the surface charge indicated that the mucopopolysacchrides have greater affinity for the COM surface than the proteins. The amount of proteins that can chemically adsorb appears to be limited to approximately one monomolecular layer. When the surface charge is high, an insufficient number of proteins can chemically adsorb to neutralize or reverse the surface charge. The remaining surface charge is balanced by proteins held near the surface by longer range electrostatic forces only. Citrate ions at high concentrations appear to compete effectively with the negative protein for surface sites but show no evidence for competing with the positively charged protein

Electromagnetic levitation coil fabrication technique for MSFC containerless processing facilities

A technique is described for more reproducible fabrication of electromagnetic levitation coils. A split mandrel was developed upon which the coil is wound. After fabrication the mandrel can be disassembled to remove it from the coil. Previously, a full day was required to fabricate a levitation coil and the success rate for a functional coil was only 50 percent. About eight coils may be completed in one day using the technique developed and 95 percent of them are good levitation coils

Design and implementation of a low-gravity solidification experiment package for the F-104

The use of the F-104 Interceptor for low gravity materials processing experiments is extended to include alloy solidification studies above 1000 C. The F-104 can provide up to 60 seconds of low gravity, but requires a unique experiment package for integration into the aircraft, both physically and electronically. The current research with the F-104 experimental furnace system which has been used to process cast iron samples is described. Results demonstrate the capability of the facility and its operation

Criminal networks analysis in missing data scenarios through graph distances

Data collected in criminal investigations may suffer from issues like: (i) incompleteness, due to the covert nature of criminal organizations; (ii) incorrectness, caused by either unintentional data collection errors or intentional deception by criminals; (iii) inconsistency, when the same information is collected into law enforcement databases multiple times, or in different formats. In this paper we analyze nine real criminal networks of different nature (i.e., Mafia networks, criminal street gangs and terrorist organizations) in order to quantify the impact of incomplete data, and to determine which network type is most affected by it. The networks are firstly pruned using two specific methods: (i) random edge removal, simulating the scenario in which the Law Enforcement Agencies fail to intercept some calls, or to spot sporadic meetings among suspects; (ii) node removal, modeling the situation in which some suspects cannot be intercepted or investigated. Finally we compute spectral distances (i.e., Adjacency, Laplacian and normalized Laplacian Spectral Distances) and matrix distances (i.e., Root Euclidean Distance) between the complete and pruned networks, which we compare using statistical analysis. Our investigation identifies two main features: first, the overall understanding of the criminal networks remains high even with incomplete data on criminal interactions (i.e., when 10% of edges are removed); second, removing even a small fraction of suspects not investigated (i.e., 2% of nodes are removed) may lead to significant misinterpretation of the overall network. Copyright

Containerless drop tube solidification and grain refinement of NiAl3

The possibility of undercooling Ni-Al alloys below the liquidus in order to produce a single phase peritectic structure by containerless drop tube solidification was studied. Containerless process is a technique for both high purity contamination free studies as well as for investigating the undercooling and rapid solidification of alloys by suppression of heterogeneous nucleation on container walls. In order to achieve large undercoolings one must avoid heterogeneous nucleation of crystallization. It was shown that the Marshall Space Flight Center drop tubes ae unique facilities for containerless solidification experiments and large undercoolings are possible with some alloys. The original goal of undercooling the liquid metal well below the liquidus to the peritectic temperature during containerless free to form primarily NiAl3 was achieved. The microstructures were interesting from another point of view. The microstructure from small diameter samples is greatly refined. Small dendrite arm spacings such as these could greatly facilitate the annealing and solid state transformation of the alloy to nearly 10% NiAl3 by reducing the distance over which diffusion needs to occur. This could minimize annealing time and might make it economically feasible to produce NiAl3 alloy

Secondary bacterial infections of buruli ulcer lesions before and after chemotherapy with streptomycin and rifampicin

Buruli ulcer (BU), caused by Mycobacterium ulcerans is a chronic necrotizing skin disease. It usually starts with a subcutaneous nodule or plaque containing large clusters of extracellular acid-fast bacilli. Surrounding tissue is destroyed by the cytotoxic macrolide toxin mycolactone produced by microcolonies of M. ulcerans. Skin covering the destroyed subcutaneous fat and soft tissue may eventually break down leading to the formation of large ulcers that progress, if untreated, over months and years. Here we have analyzed the bacterial flora of BU lesions of three different groups of patients before, during and after daily treatment with streptomycin and rifampicin for eight weeks (SR8) and determined drug resistance of the bacteria isolated from the lesions. Before SR8 treatment, more than 60% of the examined BU lesions were infected with other bacteria, with Staphylococcus aureus and Pseudomonas aeruginosa being the most prominent ones. During treatment, 65% of all lesions were still infected, mainly with P. aeruginosa. After completion of SR8 treatment, still more than 75% of lesions clinically suspected to be infected were microbiologically confirmed as infected, mainly with P. aeruginosa or Proteus miriabilis. Drug susceptibility tests revealed especially for S. aureus a high frequency of resistance to the first line drugs used in Ghana. Our results show that secondary infection of BU lesions is common. This could lead to delayed healing and should therefore be further investigated

Chirurgia reiterativa morfofunzionale in paziente con malattia di von Recklinghausen. Case report

Neurofibromatosis 1 is an autosomal dominant disease with an estimated incidence 1:2500 to 1:3000 live newborns. The disease presents with multiple cutaneous and non cutaneous lesions. NF1 occurs with equal frequency in males and females and has been identified in all ethnic group. The morbidity and the mortality caused by NF1 are the result of complications that may involve any of the body systems. This disease has been linked with mutations of the NF1 gene which encodes tumor suppressor neurofibromin. At least half of patients with NF1 will have only cutaneous involvement that is not considered to be a major medical problem, even though it can be a source of psychologic burden as a result of cosmetic disfigurement. The cardinal features of the disorder are cafè-au-lait spots, axillary freckling, cutaneous neurofibromas and Lisch nodules, but there are a lot of wide variety of complications affecting almost every system of the body, including the eyes (optic glioma), the nervous system (intracranial tumors), the skeleton (short stature, scoliosis), the endocrine and cardiovascular system (hypertension). Manifestations of NF1 vary at different times in an individual’s life. Substantial variability exists among affected members of a single family. This variability confounds clinical management and the severity of the disease cannot be predicted. We present a case in young woman 24 years-old treated by reiterative plastic surgery