12,916 research outputs found
Development of an advanced microelectronic connection welding system Final report
Development of microelectronic connection welding system using infrared feedback contro
Shallow grooves in journal improve air bearing performance
Bearing designs, which shape the surface to create artificial fluid-film wedges in the absence of any applied radial load, generate radial restoring forces to keep journals from whirling. Helical- or herringbone-grooved journals or rotors show most promise of stable operation, with no sacrifice in load capacity
Experimental dynamic stiffness and damping of externally pressurized gas-lubricated journal bearings
A rigid vertical shaft was operated with known amounts of unbalance at speeds to 30,000 rpm and gas supply pressure ratios to 4.8. From measured amplitude and phase angle data, dynamic stiffness and damping coefficients of the bearings were determined. The measured stiffness was proportional to the supply pressure, while damping was little affected by supply pressure. Damping dropped rapidly as the fractional frequency whirl threshold was approached. A small-eccentricity analysis overpredicted the stiffness by 20 to 70 percent. Predicted damping was lower than measured at low speeds but higher at high speeds
Experiments on rotating externally pressurized air journal bearings. Part 2 - Attitude angle and air flow
Air flow and attitude angle compared with theory for rotating externally pressurized air journal bearing
System remotely inspects, measures, and records internal irregularities in piping
Video electromechanical probe visually inspects and measures internal offset and peaking of welds in relatively large piping. Irregularity dimensions are recorded on peripheral equipment consisting of video tape and X-Y plotter. The probe is used for inspection of vacuum-jacketed liquid lines that cannot be inspected externally
Transonic unsteady airloads on an energy efficient transport wing with oscillating control surfaces
An aspect ratio 10.8 supercritical wing with oscillating control surfaces is described. The wing is instrumental with 252 static orifices and 164 in situ dynamic pressure transducers for studying the effects of control surface deflection on steady and unsteady pressures at transonic speeds. Results from initial wind tunnel tests conducted in the Langley Transonic Dynamics Tunnel are discussed. Unsteady pressure results are presented for two trailing edge control surfaces oscillating separately at the design Mach number of 0.78. Some experimental results are compared with analytical results obtained by using linear lifting surface theory
Subsonic aerodynamic and flutter characteristics of several wings calculated by the SOUSSA P1.1 panel method
The SOUSSA (steady, oscillatory, and unsteady subsonic and supersonic aerodynamics) program is the computational implementation of a general potential flow analysis (by the Green's function method) that can generate pressure distributions on complete aircraft having arbitrary shapes, motions and deformations. Some applications of the initial release version of this program to several wings in steady and oscillatory motion, including flutter are presented. The results are validated by comparisons with other calculations and experiments. Experiences in using the program as well as some recent improvements are described
- …