Automatic thermal switch

An automatic thermal switch to control heat flow includes two thermally conductive plates and a thermally conductive switch saddle pivotally mounted to the first plate. A flexible heat carrier is connected between the switch saddle and the second plate. A phase-change power unit, including a piston coupled to the switch saddle, is in thermal contact with the first thermally conductive plate. A biasing element biases the switch saddle in a predetermined position with respect to the first plate. When the phase-change power unit is actuated by an increase in heat transmitted through the first place, the piston extends and causes the switch saddle to pivot, thereby varying the thermal conduction between the two plates through the switch saddle and flexible heat carrier. The biasing element, switch saddle, and piston can be arranged to provide either a normally closed or normally opened thermally conductive path between the two plates

Automatic thermal switch

An automatic thermal switch to control heat flow includes a first thermally conductive plate, a second thermally conductive plate and a thermal transfer plate pivotally mounted between the first and second plates. A phase change power unit, including a plunger connected to the transfer plate, is in thermal contact with the first thermally conductive plate. A biasing element, connected to the transfer plate, biases the transfer plate in a predetermined position with respect to the first and second plates. When the phase change power unit is actuated by an increase in heat transmitted through the first plate, the plunger extends and pivots the transfer plate to vary the thermal conduction between the first and second plates through the transfer plate. The biasing element, transfer plate and piston can be arranged to provide either a normally closed or normally open thermally conductive path between the first and second plates

Expansion of a mathematical model of thermoregulation to include high metabolic rates Final report, Jun. 19, 1967 - Jun. 18, 1968

Mathematical model of human thermoregulation with high metabolic rate

Status, Dispersal, and Breeding Biology of the Exotic Eurasian Collared-Dove (Streptopelia decaocto) in Arkansas

The exotic Eurasian Collared-Dove (Streptopelia decaocto) was first sighted in Arkansas at Harrison (Boone Co.) on 25 June 1989. Since this initial sighting the species has grown in numbers and is now present in 42 of 75 counties across the state. In the spring and summer of 2009 and 2010, 20 nests were observed in the urban areas of Fort Smith (Sebastian County). Fifteen of the 20 nests (75%) were located on human-made structures of which 13 (65%) were on an electrical substation and two (10%) were on utility poles. The remaining 5 nests (25%) were in trees. Mean nest height was 7.62 m (n = 20 nests), and the mean width of the nest site support was 40 cm (n = 6 nests). Thirteen of the 20 nests (65%) yielded fledgling(s). Three focal nests were chosen for intense observation. Nest building lasted 1 to 3 days (mean = 2 days); incubation period was 15 days; and fledging occurred 17-18 days after hatching (n = 3 nests). A total of 6 young fledged from these 3 nests

Shallow grooves in journal improve air bearing performance

Bearing designs, which shape the surface to create artificial fluid-film wedges in the absence of any applied radial load, generate radial restoring forces to keep journals from whirling. Helical- or herringbone-grooved journals or rotors show most promise of stable operation, with no sacrifice in load capacity

Experimental dynamic stiffness and damping of externally pressurized gas-lubricated journal bearings

A rigid vertical shaft was operated with known amounts of unbalance at speeds to 30,000 rpm and gas supply pressure ratios to 4.8. From measured amplitude and phase angle data, dynamic stiffness and damping coefficients of the bearings were determined. The measured stiffness was proportional to the supply pressure, while damping was little affected by supply pressure. Damping dropped rapidly as the fractional frequency whirl threshold was approached. A small-eccentricity analysis overpredicted the stiffness by 20 to 70 percent. Predicted damping was lower than measured at low speeds but higher at high speeds

Experiments on rotating externally pressurized air journal bearings. Part 2 - Attitude angle and air flow

Air flow and attitude angle compared with theory for rotating externally pressurized air journal bearing